Return To Main Index Page EMail Us Call Us: (302) 629-8508

Related Items including boots, buckles,end fittings.retractors,sleeves and more.

Individual Mounting Components

Retrofit Mounting Kits includes underbody reinforcing plates which should be used to add support to mounting points.

A standard mounting hardware kit, depending on the application, will include bolts, L-brackets, lock washers, nuts and oversize underbody washers to install a seat belt for one person/position. Unless indicated all kit listed are sold each.. The primary difference between a standard and retrofit mounting kit is the retrofit kit also includes underbody and/or shoulder harness reinforcemt plates which are threaded or have attached weld nuts to be used to add support to the mounting points when seat belts were not factory or dealer installed or when installing seat belts in a new location..





Lap Seat Belt Mounting Kit

Quantity:
Quantity:

Click on picture to enlarge.
Suggested Use: To install one non retractable lap seat belt.
  • MH2 Kit: Includes yellow zinc bolts, lock washers, nuts and underbody washers.
  • MH4 Kit: Includes zinc chromate bolts, lock washers, nuts and underbody washers.
  • For product questions or ordering assistance please call (302)629-8508.


    • Sister/Snap Hook Lap Seat Belt Mounting Kit

    Quantity:

    Click on picture to enlarge.
    Suggested Use: To install one non retractable lap seat belt with sister/snap hook end fittings.
  • For product questions or ordering assistance please call (302)629-8508.









    • Extension Bracket Kits

    Quantity:
    Quantity:
    Quantity:


    Click on picture to enlarge.
  • MH22 Kit: Includes yellow zinc extension bracket. Measures 4"L x 1 1/2W x 1/8" thick(2 3/4" center hole to center hole) plus 4 bolts,lock washers and nuts.
  • MH28 Kit: Same as MH22 kit plus L-bracket and hardware. Requires excisting 7/16-20 threaded underbody reinforcing plate or MH5 underbody kit.
  • MH21 Kit: Includes yellow zinc or zinc chromate bracket. Measures 7 1/2"L x 1 1/2W x 1/8 thick(6" center hole to center hole) plus 4 bolts,lock washers and nuts.
  • MH5 Kit: Includes oversize underbody reinforcing washer, lock washer and nut.
  • All measurements are approximate.
  • For product questions or ordering assistance please call (302)629-8508.



    • L-Bracket Mounting Kit

    Quantity:
    Quantity:


    Click on picture to enlarge.
    Suggested Use:To mount a retractor and/or buckle side upright.
  • Includes oversize underbody reinforcing washer, L-bracket and hardware.
  • For product questions or ordering assistance please call (302)629-8508.



    • L-Bracket Mounting Kit

    Quantity:
    Quantity:
    Quantity:


    Click on picture to enlarge.
    Suggested Use:To mount a retractor and/or buckle side or 2 retractors or buckle sides upright.
    Suggested use: To install lap seat belt in vehicle with bucket seats.
  • Includes L-brackets, 4 bolts with lock washers and 2 nuts. Existing 7-16-20 threaded underbody reinforcing plate required or MH12 kit.
  • MH12 Kit: Includes oversize underbody reinforcing washer, lock washer and nut.
  • For product questions or ordering assistance please call (302)629-8508.



    • Mounting Kit

    Quantity:
    Quantity:


  • Suggested Use:To mount a retractable lap seat belt in a vehicle with benc seats.
  • Includes the hardware to mount retractor upright and buckle side to L-bracket and L-bracket thru floor.
  • For product questions or ordering assistance please call (302)629-8508.



    • Mounting Kit

    Quantity:
    Quantity:

    Click on picture to enlarge.
    Suggested Use: To install a retractable lap seat belts with attached shoulder harness in vehicle with bench seats. Existing shoulder strap threaded 7/16-20 mounting point required.
  • For product questions or ordering assistance please call (302)629-8508.


    • Return To Main Index Page EMail Us Call Us: (302) 629-8508


    Liability Disclaimer: The Andover Companies, and its subsidiaries assumes no responsibility for any damage due to the installation, either proper or improper, or for any damage or bodily injury arising from the use of any product. It is understood that the purchaser, installer and/or end user is responsible for the determination that the product purchased is suitable for its intended use and agrees to indemnify and hold The Andover Companies,Inc and its subsidiaries, harmless for any claim, action or demand arising from the installation and/or use of any product. There are no guarantees or warrantees on any product, implied or expressed, of fitness for a particular use with any such warrantees being specifically and expressly disclaimed. In the event any of the above limitations are held not enforceable our liability shall not exceed an amount equal to the amount paid to us for the product. Receipt of product or products confirm acceptance of disclaimer and liability transfer to purchaser, installer and/or end user.

    All information detailed within this document is based on information believed to be accurate but accuracy is not guaranteed. All pictures, diagrams and item descriptions are protected property of The Andover Companies,Inc and are not to be duplicated in any manner without written permission.

    (ARW32-1 10-13-22)