Return To Main Index Page EMail Us Call Us: (302) 629-8508


Related Items ncluding boots, buckles, end fittings, retractors, sleeves and more.

Standard Mounting Kits

Retrofit Mounting Kits include underbody reinforcing plates which should be used to add support to mounting points.



Bolts And Hardware

Quantity


Product Notes: Click on picture to enlarge
  • See Bolt Head Cover below
  • MH1-13: 7/16th-20 x 2 1/2". 1 1/4" threaded area. 5/8" eye. 1/4" thick. Yellow zinc.
  • MH6: 7/16th-20 x 1 3/8". 3/8" collar. 3/4" threaded area. Zinc chromate.
  • MH7: 7/16th-20 x 1 1/2" hex head bolt. 1 1/4" threaded area. Zinc chromate.
  • MH11: 7/16th-20 x 1 3/4" hex head bolt. 1 1/2" threaded area. Zinc chromate.
  • MH12: 7/16th Lock washer. Zinc chromate.
  • MH13: 7/16th-20 Hex nut. Zinc chromate.
  • MH1-4Z: 2 1/2" OD reinforcing washer. Zinc chromate.
  • All measurements are approximate.
  • For product questions or ordering assistance please call (302)629-8508.



  • Bolt Head Cover

    Quantity


    Product Notes: Click on picture to enlarge
  • Black. Paintable. Snaps on to head of a 5/8 hex bolt. Fits all hex head bolts included in our mounting kits.
  • For product questions or ordering assistance please call (302)629-8508.




  • Brackets

    Quantity


    Click on picture to enlarge.
  • RB6: 90 degree L-bracket. 1 1/2" x 1 7/8. Yellow zinc.
  • RB7: Flat extension.Yellow zinc. 4"L x 1 1/2W x 1/8" thick. 2 3/4" center hole to center hole.
  • RB11: Flat extension. Yellow zink or zinc chromate. 7 1/2"L x 1 1/2W x 1/8 thick. 6" center hole to center hole.
  • All measurements are approximate.
  • For product questions or ordering assistance please call (302)629-8508.





  • Bracket Set-Jeep (1976 CJ and 1987-95 Y5)

    Quantity


    Click on picture to enlarge.
  • KRB8-YZ Set: Yellow Zinc. 7" long. Includes left/right angle brackets. 65 degree bend. 1/2" bolt holes 6" apart.
  • RB8B Set: Same as RB8 set except with black powdercoating.
  • All measurements are approximate.
  • For product questions or ordering assistance please call (302)629-8508.


  • Reinforcing Plates

    Quantity


    Click on picture to enlarge.
  • RB1-1: Curved steel with 7/16-20 weld nut. Measures 4 1/2"L x 3"W.
  • RB1: Same as RB1-1 except set of 2.
  • RB4: Threaded for 7/16-20 bolt. Measures 3"L x 1 1/2"W.
  • RB4-2: Same as RB4 except set of 2.
  • All measurements are approximate.
  • For product questions or ordering assistance please call (302)629-8508.




  • Shoulder Harness Body Bracket

    Quantity


    Click on picture to enlarge.
  • MH34 Kit: Used to convert 1966-73 GM factory shoulder harness strap 2 bolt hole mounting point to a single bolt mounting to allow for installation of a modern combination lap belt with shoulder harness. Includes shoulder bolt and mounting bolts.
  • For product questions or ordering assistance please call (302)629-8508.

  • Return To Main Index Page EMail Us Call Us: (302) 629-8508



    Liability Disclaimer: The Andover Companies, and its subsidiaries assumes no responsibility for any damage due to the installation, either proper or improper, or for any damage or bodily injury arising from the use of any product. It is understood that the purchaser, installer and/or end user is responsible for the determination that the product purchased is suitable for its intended use and agrees to indemnify and hold The Andover Companies,Inc and its subsidiaries, harmless for any claim, action or demand arising from the installation and/or use of any product. There are no guarantees or warrantees on any product, implied or expressed, of fitness for a particular use with any such warrantees being specifically and expressly disclaimed. In the event any of the above limitations are held not enforceable our liability shall not exceed an amount equal to the amount paid to us for the product. Receipt of product or products confirm acceptance of disclaimer and liability transfer to purchaser, installer and/or end user.

    All information detailed within this document is based on information believed to be accurate but accuracy is not guaranteed. All pictures, diagrams and item descriptions are protected property of The Andover Companies,Inc and are not to be duplicated in any manner without written permission.

    (ARW32 10-2-22)