FAQ Contact Us:EMail Call Us:(302) 629-8508
More Buckle Choices Components And Related On Sale Return To Main Index Page



Vintage chrome lift lid release buckle non retractable lap seat belt and retrofit lap seat belt set with snap hooks anchor end fittings that attach to floor mounted eyebolts. The seat belts listed are new universal fit and not implied to be vehicle or application specific made in the USA with certification tags confirming compliance with current FMVSS(Federal Motor Vehicle Safety Standards) 209 and 302.

Vintage Chrome Lid Seat Belts With Fixed End Fittings









Non Retractable Lap Seat Belt

Quantity:
Quantity:

Quantity:


Product Notes: Click On Picture To Enlarge.
  • Anchor End Fittings: Snap hooks.1 1/2" W x 2 5/8" L. Opens 3/8".
  • Buckle: Lift lid release with chrome lid and chrome underside. Measures 2 1/8" x 2 1/2".
  • Length 60": Adjustable buckle side 36". Fixed latch side 24".
  • CR1 Retractor w/Install Instructions: Clip-on. Black plastic. Measures 3" x 2 1/2".
  • 80296 Retractor w/Install Instructions: Clip-on. Chrome "Roll-A-Belt" style.
  • For product questions or ordering assistance call (302)629-8508.

    Mounting Kits
  • MH3 Standard Mounting Kit includes yellow zinc eyebolts, washers, nuts and oversize underbody reinforcing washers.
  • 205K Retrofit Mounting Kit includes yellow zinc eyebolts and threaded underbody reinforcing plates to add support to the mounting points which should be used when seat belts are being installed in a location they were not previously dealer or factory installed. Standard mounting kit is not required when ordering.
    .











  • Non Retractable Retrofit Lap Seat Belt Set

    Quantity:

    Quantity:
    Quantity:

    Quantity:


    Product Notes: Click On Picture To Enlarge.
  • Anchor End Fittings: Snap hooks.1 1/2" W x 2 5/8" L. Opens 3/8".
  • Buckle: Lift lid release with chrome lid and chrome underside. Measures 2 1/8" x 2 1/2".
  • Length 60": Adjustable buckle side 36". Fixed latch side 24".
  • Front center/rear non retractable seat belts have fixed anchor end fittings.
  • CR1 Retractor w/Install Instructions: Clip-on. Black plastic. Measures 3" x 2 1/2".
  • 80296 Retractor w/Install Instructions: Clip-on. Chrome "Roll-A-Belt" style.
  • For product questions or ordering assistance call (302)629-8508.

    Rear Seat Mounting Kits
  • MH2 Standard Mounting Kit includes yellow zinc bolts, washers, nuts and oversize underbody reinforcing washers.
  • MH4 Standard Mounting Kit includes zinc chromate bolts, washers, nuts and oversize underbody reinforcing washers.
  • 201K Retrofit Mounting Kit includes zinc chrome bolts and washers and threaded underbody reinforcing plates to add support to the mounting points which should be used when seat belts are being installed in a location they were not previously dealer or factory installed. Standard mounting kit is not required when ordering.
    .


  • Related Items



    Reinforcement Plates,Underbody

    Quantity

    Product Notes: Click On Picture To Enlarge
  • RB1-1: Curved steel with attached 7/16-20 weldnut. Measures 4 1/2" x 3".
  • RB1: Same as RB1 except pair.
  • RB4: Measures 3" x 1 1/2" with threaded 7/16-20 bolt hole.
  • RB4-2: Same as RB4 except pair.
  • For product questions or ordering assistance call (302)629-8508.



  • Retractors, Clip On

    Quantity

    Product Notes: Click On Picture To Enlarge
  • CR1 Retractor w/Install Instructions: Clip-on. Black plastic. Measures 3" x 2 1/2".
  • 80296 Retractor w/Install Instructions: Clip-on. Chrome "Roll-A-Belt" style.
  • For product questions or ordering assistance call (302)629-8508.

  • FAQ Contact Us:EMail Call Us:(302) 629-8508
    More Buckle Choices Components And Related On Sale Return To Main Index Page


    Liability Disclaimer: The Andover Companies, and its subsidiaries assumes no responsibility for any damage due to the installation, either proper or improper, or for any damage or bodily injury arising from the use of any product. It is understood that the purchaser, installer and/or end user is responsible for the determination that the product purchased is suitable for its intended use and agrees to indemnify and hold The Andover Companies,Inc and its subsidiaries, harmless for any claim, action or demand arising from the installation and/or use of any product. There are no guarantees or warrantees on any product, implied or expressed, of fitness for a particular use with any such warrantees being specifically and expressly disclaimed. In the event any of the above limitations are held not enforceable our liability shall not exceed an amount equal to the amount paid to us for the product. Receipt of product or products confirm acceptance of disclaimer and liability transfer to purchaser, installer and/or end user.

    All information detailed within this document is based on information believed to be accurate but accuracy is not guaranteed. All pictures, diagrams and item descriptions are protected property of The Andover Companies,Inc and are not to be duplicated in any manner without written permission.

    (ARW40(was 5-1) 10-21-21)