FAQ Contact Us:EMail Call Us:(302) 629-8508
On Sale Components And Related Return To Main Index Page



Non retractable lap seat belts plus retrofit lap seat belt sets which include underbody reinforcing plates with standard buckles with Fisher Coach or Mark of Excellence logos on the buckle press area manufactured or assembled in the USA with USA certification tags confirming compliance with current FMVSS(Federal Motor Vehicle Safety Standards) 209 and 302. All seat belts are new universal fit and not implied to be vehicle or application specific.












With Fisher Coach Logo Buckle

Quantity:
Quantity:

Quantity:
Quantity:


For More Seat Belts With This Buckle
Product Notes: Click On Pictures To Enlarge.
  • Anchor End Fittings:
  • Buckle(Rmfg): Plastic capped. Metal chrome base. Measures 2 1/4" W x 2 5/8" L.
  • Buckle Press Area: 1 1/8" x 1 1/8" with angled inside and ends.
  • Buckle Press: 3/4 x 3/4 with blue Fisher Coach logo framed in silver on black background.
  • Length 60": Adjustable buckle side 36". Fixed latch side 24".
  • Length 74": Adjustable buckle side 40". Fixed latch side 34".
  • 80296 Retractor w/Install Instructions: Clip-on. Chrome "Roll-A-Belt" style.
  • CVR100B Cover: Snaps on to bolt head covering end fitting. Sold each.
  • Webbing: 7 Panel
  • For product questions or ordering assistance call (302)629-8508.

    Mounting Hardware
  • MH2 Standard Mounting Kit includes yellow zinc bolts, washers, nuts and oversize underbody reinforcing washers.
  • MH4 Standard Mounting Kit includes zinc chromate bolts, washers, nuts and oversize underbody reinforcing washers.
  • 201K Retrofit Mounting Kit includes zinc chromate bolts, washers and threaded underbody reinforcing plates to add support to the mounting points which should be used when seat belts are being installed in a location they were not previously dealer or factory installed. Standard mounting kit is not required when ordering..













  • Retrofit Lap Belt Set With Fisher Coach Logo Buckles

    Set includes seat belts and retrofit mounting kit for 2 persons/positions which includes mounting hardware plus threaded underbody reinforcing plates to add support to the mounting points which should be used when installing seat belts in a location they were not previously dealer or factory installed. When adding an additional seat belt for a center/middle sitting position additional mounting hardware is not required.
    Quantity:

    Quantity:
    Quantity:

    Quantity:
    Quantity:

    Product Notes: Click On Picture To Enlarge
  • Anchor End Fitting:
  • Buckle(Rmfg): Plastic capped. Metal chrome base. Measures 2 1/4" W x 2 5/8" L.
  • Buckle Press Area: 1 1/8" x 1 1/8" with angled inside and ends.
  • Buckle Press: 3/4 x 3/4 with blue Fisher Coach logo framed in silver on black background.
  • Length 60": Adjustable latch side 36". Fixed buckle side 24".
  • Length 74": Adjustable latch side 40". Fixed buckle side 34".
  • CVR100B Cover: Snaps on to bolt head covering end fitting. Sold each.
  • 80296 Retractor w/Install Instructions: Clip-on. Chrome Roll-A-Belt style.
  • For product questions or ordering assistance call (302)629-8508.

    Rear Seat Mounting Kits
  • MH2 Standard Mounting Kit includes yellow zinc bolts, washers, nuts and oversize underbody reinforcing washers.
  • MH4 Standard Mounting Kit includes zinc chromate bolts, washers, nuts and oversize underbody reinforcing washers.
  • 201K Retrofit Mounting Kit includes zinc chromate bolts, washers and threaded underbody reinforcing plates to add support to the mounting points which should be used when seat belts are being installed in a location they were not previously dealer or factory installed. Standard mounting kit is not required when ordering.













  • With Mark Of Excellence Logo Buckle

    Quantity:
    Quantity:

    Quantity:
    Quantity:


    For More Seat Belts With This Buckle
    Product Notes: Click On Pictures To Enlarge.
  • Anchor End Fittings:
  • Buckle(Rmfg): Plastic capped. Metal chrome base. Measures 2 1/4" W x 2 5/8" L.
  • Buckle Press Area: 1 1/8" x 1 1/8" with angled inside and ends.
  • Buckle Press: 3/4 x 3/4 with blue Mark Of Excellence logo framed in silver on black background.
  • Length 60": Adjustable buckle side 36". Fixed latch side 24".
  • Length 74": Adjustable buckle side 40". Fixed latch side 34".
  • 80296 Retractor w/Install Instructions: Clip-on. Chrome "Roll-A-Belt" style.
  • CVR100B Cover: Snaps on to bolt head covering end fitting. Sold each.
  • Webbing: 7 Panel
  • For product questions or ordering assistance call (302)629-8508.

    Mounting Hardware
  • MH2 Standard Mounting Kit includes yellow zinc bolts, washers, nuts and oversize underbody reinforcing washers.
  • MH4 Standard Mounting Kit includes zinc chromate bolts, washers, nuts and oversize underbody reinforcing washers.
  • 201K Retrofit Mounting Kit includes zinc chromate bolts, washers and threaded underbody reinforcing plates to add support to the mounting points which should be used when seat belts are being installed in a location they were not previously dealer or factory installed. Standard mounting kit is not required when ordering..













  • Retrofit Lap Belt Set With Mark Of Excellence Logo Buckles

    Set includes seat belts and retrofit mounting kit for 2 persons/positions which includes mounting hardware plus threaded underbody reinforcing plates to add support to the mounting points which should be used when installing seat belts in a location they were not previously dealer or factory installed. When adding an additional seat belt for a center/middle sitting position additional mounting hardware is not required.
    Quantity:

    Quantity:
    Quantity:

    Quantity:
    Quantity:

    Product Notes: Click On Picture To Enlarge
  • Anchor End Fitting:
  • Buckle(Rmfg): Plastic capped. Metal chrome base. Measures 2 1/4" W x 2 5/8" L.
  • Buckle Press Area: 1 1/8" x 1 1/8" with angled inside and ends.
  • Buckle Press: 3/4 x 3/4 with blue Mark Of Excellence logo framed in silver on black background.
  • Length 60": Adjustable latch side 36". Fixed buckle side 24".
  • Length 74": Adjustable latch side 40". Fixed buckle side 34".
  • CVR100B Cover: Snaps on to bolt head covering end fitting. Sold each.
  • 80296 Retractor w/Install Instructions: Clip-on. Chrome Roll-A-Belt style.
  • For product questions or ordering assistance call (302)629-8508.

    Rear Seat Mounting Kits
  • MH2 Standard Mounting Kit includes yellow zinc bolts, washers, nuts and oversize underbody reinforcing washers.
  • MH4 Standard Mounting Kit includes zinc chromate bolts, washers, nuts and oversize underbody reinforcing washers.
  • 201K Retrofit Mounting Kit includes zinc chromate bolts, washers and threaded underbody reinforcing plates to add support to the mounting points which should be used when seat belts are being installed in a location they were not previously dealer or factory installed. Standard mounting kit is not required when ordering.


  • Related Items



    Cover, Bolt Head

    Quantity:

    Product Notes: Click On Picture To Enlarge
  • Snaps on to bolt head of any bolt used in the retrofit or mounting kits listed.
  • For product questions or ordering assistance call (302)629-8508.

  • Cover, End Fitting

    Quantity:

    Product Notes: Click On Picture To Enlarge
  • Fits any end fitting used on the seat belts listed.
  • Snaps on to bolt head covering the bolt head and the anchor end fitting. Sold each.
  • For product questions or ordering assistance call (302)629-8508.




  • Mounting Kits

    Quantity:

    Product Notes: Click On Picture To Enlarge

  • MH2 Standard Mounting Kit includes yellow zinc bolts, washers, nuts and oversize underbody reinforcing washers.
  • MH4 Standard Mounting Kit includes zinc chromate bolts, washers, nuts and and oversize underbody reinforcing washers.
  • 201 Retrofit Mounting Kit includes zinc chromate bolts, washers and threaded underbody reinforcing plates to add support to the mounting points which should be used when seat belts are being installed in a location they were not previously dealer or factory installed. Standard mounting kit is not required when ordering.
  • For product questions or ordering assistance call (302)629-8508.





  • Reinforcement Plates, Underbody

    Quantity:

    Quantity:

    Product Notes: Click On Picture To Enlarge
  • RB1-1: Curved steel with attached 7/16-20 weldnut. Measures 4 1/2" x 3".
  • RB1: Same as RB1 except pair.
  • RB4: Measures 3" x 1 1/2" with 7/16-20 threaded bolt hole.
  • RB4-2: Same as RB4 except pair.

  • MH7: Hex head 7/16th-20 x 1 1/2". 1 1/4" threaded area. Zinc chromate.
  • MH11: Hex head 7/16th-20 x 1 3/4". 1 1/2" threaded area. Zinc chromate.
  • MH12: 7/16th Lock washer. Zinc chromate.
  • MH13: 7/16th-20 Hex nut. Zinc chromate.
  • All measurements are approximate.
  • For product questions or ordering assistance call (302)629-8508.



  • Retractors, Clip On

    Quantity:

    Product Notes: Click On Picture To Enlarge
  • CR1 Retractor w/Install Instructions: Clip-on. Black plastic. Measures 3" x 2 1/2".
  • 80296 Retractor w/Install Instructions: Clip-on. Chrome "Roll-A-Belt" style.
  • For product questions or ordering assistance call (302)629-8508.

  • FAQ Contact Us:EMail Call Us:(302) 629-8508
    On Sale Components And Related Return To Main Index Page


    Liability Disclaimer: The Andover Companies, and its subsidiaries assumes no responsibility for any damage due to the installation, either proper or improper, or for any damage or bodily injury arising from the use of any product. It is understood that the purchaser, installer and/or end user is responsible for the determination that the product purchased is suitable for its intended use and agrees to indemnify and hold The Andover Companies,Inc and its subsidiaries, harmless for any claim, action or demand arising from the installation and/or use of any product. There are no guarantees or warrantees on any product, implied or expressed, of fitness for a particular use with any such warrantees being specifically and expressly disclaimed. In the event any of the above limitations are held not enforceable our liability shall not exceed an amount equal to the amount paid to us for the product. Receipt of product or products confirm acceptance of disclaimer and liability transfer to purchaser, installer and/or end user.

    All information detailed within this document is based on information believed to be accurate but accuracy is not guaranteed. All pictures, diagrams and item descriptions are protected property of The Andover Companies,Inc and are not to be duplicated in any manner without written permission.



    (ARW36 12-25-21)