| Main Index | Contact Us | Custom Made |
When installing a seat belt where it was not previously installed or if the factory underbody or shoulder harness reinforcement plates are damaged or missing it is suggested that a RB1-1(each) or RB1(pair) underbody and/or RB3 shoulder harness reinforcement plate with attached weld nut be used to add support to all of the mounting points.
Webbing colors tend to vary from mill run to mill run therefore a match to upholstery or carpet can not be guaranteed.
The seat belts listed have been designed to replace a damaged or missing factory installed seat belt or to upgrade from a non-retractable or retractable lap seat belt to a retractable lap seat belt with shoulder harness.
The bucket/pedestal retractable lap seat belt retractor side and buckle end side are mounted to the side of or slightly behind the seat to an L-bracket, which is required in order to mount the retractor upright, or directly to the seat frame depending on the application. To accommodate the size of the retractor a minimum clearance of 3 1/2" is required between where the retractor will be mounted and any interior panel.
To mount a bench/sofa seat retractable lap seat belt for use on a bench or sofa seat there needs to be a minimum clearance of 3 1/2" between the side of the seat and any interior side wall so the retractor can be mounted next to the seat. If the clearance exists the mounting configuration is the same as on the bucket/pedestal retractable lap seat belt except for the buckle end will go thru the space between the seat back and the seat bottom to a floor attachment point.
The bucket/pedestal retractable lap seat belt with shoulder harness is available with a retractor that can be mounted directly on to an flat interior trim panel or at the floor to a L-bracket. The L-bracket is required in order to mount the retractor upright. To accomodate the size of the retractor a minimum clearance of 3 1/2" is required between where the retractor will be mounted and any interior panel.
To mount a bench/sofa seat retractable lap seat belt with shoulder harness for use on a bench or sofa seat there needs to be a minimum clearance of 3 1/2" between the side of the seat and any interior wall so the retractor can be mounted next to the seat. If the clearance exists the mounting configuration is the same as the bucket/pedestal retractable lap seat belt with shoulder harness except for the buckle end will go thru the space between the seat back and the seat bottom to a floor attachment point.
All of the plastic pieces on the seat belts are color matched to the webbing color except for on the orange and the red seat belts where these pieces are black.
Matching non-retractable lap seat belts are available in extended lengths of 60",74" or 90" for use on a bench or sofa seat or where a retractable seat belt is not being used.
To Order:
Call:410-705-1503 8-5 EST Monday-Friday
Or use the secure on-line order form located at the end of section.
Click to view webbing colors or to order webbing samples.
Column-Description Item Numbers A-Bucket/Pedestal Retractable Lap Seat Belt W8402 Series B-Bucket/Pedestal Retractable Lap Seat Belt With Shoulder Harness W8406 Series C-Bench/Sofa Retractable Lap Seat Belt W8404 Series D-Bench/Sofa Retractable Lap Seat Belt With Shoulder Harness W8407 Series E-60" Long Matching Non-Retractable Lap Seat Belt W8401 Series F-74" Long Matching Non-Retractable Lap Seat Belt W8400 Series G-90" Long Matching Non-Retractable Lap Seat Belt W8420 Series Shoulder Harness Reinforcement Plate.Sold Each RB3 Underbody Reinforcement Plate.Each RB1-1 Underbody Reinforcement Plate.Per Pair RB1Note:When using an extension bracket one MH8 bolt kit is required in addition to the selected mounting kit for each extension bracket.
Color A B C D E F G Black W8402B W8406B W8404B W8407B W8401B W8400B W8420B Blue W8402C W8406C W8404C W8407C W8401C W8400C W8420C Burgundy/Maroon W8402D W8406D W8404D W8407D W8401D W8400D W8420D Gray W8402E W8406E W8404E W8407E W8401E W8400E W8420E Orange W8402J W8406J W8404J W8407J W8401J W8400J W8420J Red W8402G W8406G W8404G W8407G W8401G W8400G W8420G Tan W8402F W8406F W8404F W8407F W8401F W8400F W8420F Mounting Kit 200 300 200 300 MH2B MH2B MH2B 2" Extension Bracket RB2 RB2 RB2 RB2 RB2 RB2 RB2 7" Left Side Extension Bracket RB8L RB8L RB8L RB8L RB8L RB8L RB8L 7" Right Side Extension Bracket RB8R RB8R RB8R RB8R RB8R RB8R RB8R Extra Extension Bolt Kit MH8 MH8 MH8 MH8 MH8 MH8 MH8
| Price | Color | Order | |
| Mounting Hardware | Price | Order |
Liability Disclaimer: The Andover Companies, Inc., and its subsidiaries assume no responsibility for any damage due to the installation, either proper or improper, or for any damage or bodily injury arising from the use of any product(s). The purchaser, installer and/or end user is responsible for the determination that any product(s) purchased is suitable for, or the fitness of, any product(s) purchased for its intended use and agrees to indemnify and hold The Andover Companies, Inc and its subsidiaries, harmless from any claim, action or demand arising from the installation and/or use of any product(s). In the event any of the above limitations are held not enforceable our liability shall not exceed an amount equal to the amount paid to us for the product(s). Receipt of product(s) confirms the acceptance of this disclaimer and the confirmation of the understanding of the full and complete liability transfer to purchaser, installer and/or end user.
All information detailed within this document is based on information believed to be accurate but accuracy is not guaranteed.All pictures,diagrams and item descriptions are protected property of The Andover Companies,Inc and are not to be duplicated in any manner without written permission.
(van 11-11-09)