Main Seat Belt Index Page Contact Us:EMail Call Us:(302)629-8508
On Sale Custom Made Components,Hardware And Webbing

Seat Belts With Safety Orange High Visibility Webbing

Seat belts with high visibility safety orange webbing that are available as a non retractable lap seat belt, non retractable lap seat belt with attached shoulder harness, non retractable Y harness, non retractable 3 point harness, non retractable 4 point harness, retractable lap seat belt and retractable lap seat belt with shoulder harness.Contact us for the availability of seat belts with high visibility safety orange webbing in custom configurations.

All of the seat belts and related hardware are new and manufactured to meet or exceed FMVSS (U.S. Federal Motor Vehicle Safety Standards) 209 and 302.

Note: When installing a seat belt in a location where seat belts were not previously installed a retrofit mounting kit which includes body reinforcing plates and mounting hardware should be used to add support to the mounting points.

Non Retractable



Lap Seat Belt With Push Button Buckle

Quantity

Add MH2-YZ Mounting Kit $3.75ea
Add 201K-Z Retrofit Mounting Kit $12.00ea

Product Notes: Click On Picture To Enlarge
  • The buckle and all plastic pieces are black.
  • Length 60": Adjustable latch side 40". Fixed buckle side 20".
  • Length 74": Adjustable latch side 40". Fixed buckle side 34".
  • Length 90": Adjustable latch side 45". Fixed buckle side 45".
  • Lengths listed are approximate.
  • Retrofit kit, including reinforcing plates should be used when seat belts were not previously installed.
  • MH2-YZ mounting kit is not not required when purchasing a retrofit kit.
  • For product questions or ordering assistance call (302)629-8508.


  • 3-Point Lap With Shoulder Harness With Push Button Buckle

    Quantity

    Add MH9 Mounting Kit $4.75ea
    Add 301K-Z Retrofit Mounting Kit $21.50ea

    Product Notes: Click On Picture To Enlarge
  • The buckle, buckle sleeve and all plastic pieces are black.
  • The extended adjustable length less the buckle side is approximately 95" long.
  • Most bucket seat type installations will use a 12" sleeved buckle side.
  • Most bench seat type installations will use a 20" non sleeved buckle side.
  • Lengths listed are approximate.
  • Retrofit kit, including reinforcing plates should be used when seat belts were not previously installed.
  • MH9 mounting kit is not required when purchasing a retrofit kit.
  • For product questions or ordering assistance call (302)629-8508.

  • Y-Type Lap With Shoulder Harness With Push Button Buckle

    Quantity

    Add MH9 Mounting Kit $4.75ea
    Add 305K Retrofit Mounting Kit $17.00ea

    Product Notes: Click On Picture To Enlarge
  • The buckle and all plastic pieces are black.
  • Length adjustment is on both the shoulder harness and lap belt.
  • Shoulder harness strap measures 84" from attachment to lap belt.
  • Connected adjustable lap seat belt portion measures 74" long.
  • Lengths listed are approximate.
  • Retrofit kit, including reinforcing plates should be used when seat belts were not previously installed.
  • MH9 mounting kit is not required when ordering a retrofit kit.
  • Not SFI racing certified.
    For product questions or ordering assistance call (302)629-8508.


  • 4-Point Lap With Shoulder Harness With Push Button Buckle

    Quantity

    Add 400K Mounting Kit $6.50ea
    Add 401K Retrofit Mounting Kit $22.75ea

    Product Notes:Click On Picture To Enlarge
  • The buckle and all plastic pieces are black.
  • Adjustable on both lap seat belt and the shoulder harness straps.
  • Each side of the adjustable lap seat belt measures 38" long.
  • Each adjustable shoulder harness strap measures 84" from where it attaches to the lap belt.
  • Lengths listed are approximate.
  • Retrofit kit, including reinforcing plates should be used when seat belts were not previously installed.
  • 400K mounting kit is not required when purchasing a retrofit kit.
  • Not SFI certified for racing. For product questions or ordering assistance call (302)629-8508.


  • Retractable Lap Seat Belts



    Lap Belt With Push Button Buckle

    Quantity

    Add 200K Mounting Kit $4.25ea
    Add 202K-Z Bucket Seat Retrofit Mounting Kit $16.25ea
    Add 204K-Z Bench Seat Retrofit Mounting Kit $13.75ea

    Product Notes: Click On Picture To Enlarge
  • The buckle. buckle sleeve and all plastic pieces are black.
  • Most bucket seat type installations will use a 12" sleeved buckle side.
  • Most bench seat type installations will use a 20" non sleeved buckle side.
  • Lengths listed are approximate.
  • Retrofit kit, including reinforcing plates should be used when seat belts were not previously installed.
  • 200K mounting kit is not required when purchasing a retrofit kit.
  • For product questions or ordering assistance call (302)629-8508.


  • Lap Belt With End Release Push Button Buckle

    Quantity

    Add 200K Mounting Kit $4.25ea
    Add 202K-Z Bucket Seat Retrofit Mounting Kit $16.25ea
    Add 204K-Z Bench Seat Retrofit Mounting Kit $13.75ea

    Product Notes: Click On Picture To Enlarge
  • The buckle except red press area, buckle sleeve and all plastic pieces are black.
  • Most bucket seat type installations will use a 12" sleeved buckle side.
  • Most bench seat type installations will use a 20" non sleeved buckle side.
  • Lengths listed are approximate.
  • Retrofit kit, including reinforcing plates should be used when seat belts were not previously installed.
  • 200K mounting kit is not required when purchasing a retrofit kit.
  • For product questions or ordering assistance call (302)629-8508.



  • Lap Belt With Bracket/Cable End Release Buckle

    Quantity

    Add 200K Mounting Kit $4.25ea
    Add 202K-Z Retrofit Mounting Kit $16.50ea

    Product Notes: Click On Picture To Enlarge
  • The buckle, except red press area, and all plastic pieces are black.
  • Retrofit kit, including reinforcing plates should be used when seat belts were not previously installed.
  • 200K mounting kit is not required when purchasing a retrofit kit.
  • For product questions or ordering assistance call (302)629-8508.


  • Retractable Lap With Shoulder Harness


    Retractable Lap With Harness With Push Button Buckle

    Quantity

    Add 300K Mounting Kit $5.25ea
    Add 302K-Z Bucket Seat Retrofit Mounting Kit $25.75ea
    Add 303K-Z Bench Seat Retrofit Mounting Kit $22.50ea

    Product Notes: Click On Picture To Enlarge
  • The buckle, buckle sleeve and all plastic pieces are black.
  • Most bucket seat type installations will use a 12" sleeved buckle side.
  • Most bench seat type installations will use a 20" non sleeved buckle side.
  • Lengths listed are approximate.
  • Retrofit kit, including reinforcing plates should be used when seat belts were not previously installed.
  • 300K mounting kit is not required when purchasing a retrofit kit.
  • For product questions or ordering assistance call (302)629-8508.

  • Retractable Lap With Harness With End Release Push Button Buckle

    Quantity

    Add 300K Mounting Kit $5.25ea
    Add 302K-Z Bucket Seat Retrofit Mounting Kit $25.75ea
    Add 303K-Z Bench Seat Retrofit Mounting Kit $22.50ea

    Product Notes: Click On Picture To Enlarge
  • The buckle(except red press area), buckle sleeve and all plastic pieces are black.
  • Most bucket seat type installations will use a 12" sleeved buckle side.
  • Most bench seat type installations will use a 20" non sleeved buckle side.
  • Lengths listed are approximate.
  • Retrofit kit, including reinforcing plates should be used when seat belts were not previously installed.
  • 300K mounting kit is not required when purchasing a retrofit kit.
  • For product questions or ordering assistance call (302)629-8508.


  • Retractable Lap With Harness With Bracket/Cable End Release Buckle

    Quantity

    Add 300K Mounting Kit $5.25ea
    Add 303K-Z Retrofit Mounting Kit $22.50ea

    Product Notes: Click On Picture To Enlarge
  • The buckle(except red press area) and all plastic pieces are black.
  • Retrofit kit, including reinforcing plates should be used when seat belts were not previously installed.
  • 300K mounting kit is not required when purchasing a retrofit kit.
  • For product questions or ordering assistance call (302)629-8508.


  • Specialized Mounting Hardware

    Mounting Brackets

    Quantity:

    Add MH2-YZ Mounting Kit. $3.25ea

    Product Notes: Click On Picture To Enlarge
  • RB6: 1 1/2" long L-bracket. Yellow zinc.
  • RB2: 2" long L-bracket. Yellow zinc.
  • RB9: 5" long double angle bracket. Yellow zinc.
  • RB8-L: 7" long left angle bracket. 65 degree bend.
  • RB8-R: 7" long right angle bracket. 65 degree bend.
  • RB7: 3" long flat extension. Yellow zinc.
  • RB11: 6" long flat extension. Yellow zinc.
  • RB10: 12" long single angle bracket. Yellow zinc.
  • Lengths listed are approximate.
    For product questions or ordering assistance call (302)629-8508.
  • Reinforcement Plates

    Quantity:
    Add MH11 Zinc Chromate Mounting Bolt $1.30ea
    Add MH12 Zinc Chromate Lock Washer $.35ea

    Product Notes: Click On Picture To Enlarge
  • RB1-1: Curved steel with weldnut. Measures 4 1/2" x 3".
  • RB1: Same as RB-1 except pair.
  • RB3: Steel with weldnut. Measures 4 1/2"(not including tip) x 1 1/2".
  • RB4: Measures 3" x 1 1/2". Accepts a 7/16th fine thread bolt.
  • For product questions or ordering assistance call (302)629-8508.


  • Liability Disclaimer: The Andover Companies, and its subsidiaries assumes no responsibility for any damage due to the installation, either proper or improper, or for any damage or bodily injury arising from the use of any product. It is understood that the purchaser, installer and/or end user is responsible for the determination that the product purchased is suitable for its intended use and agrees to indemnify and hold The Andover Companies,Inc and its subsidiaries, harmless for any claim, action or demand arising from the installation and/or use of any product. There are no guarantees or warrantees on any product, implied or expressed, of fitness for a particular use with any such warrantees being specifically and expressly disclaimed. In the event any of the above limitations are held not enforceable our liability shall not exceed an amount equal to the amount paid to us for the product. Receipt of product or products confirm acceptance of disclaimer and liability transfer to purchaser, installer and/or end user.

    All information detailed within this document is based on information believed to be accurate but accuracy is not guaranteed. All pictures, diagrams and item descriptions are protected property of The Andover Companies,Inc and are not to be duplicated in any manner without written permission.

    (safety 11-5-15)