Available in an H-Type or Y-Type configuration with 3,4 or 5 point mounting with 3" wide webbing that is adjustable at all of the attachment points. Manufacture certified to exceed SFI specification 16.1.
Features a forged steel quick release lift latch and link type belt buckle which allows for the release of all of the straps at the same time using a single latch.
Can be mounted to a roll bar or to the floor in either a wrap around or as a direct bolt. The H-Type harness requires three MH2 bolt kits and the Y-Type harness requires two MH2 bolt kits for mounting. If the H-Type harness is installed as a 4-point harness or the Y-Type harness is installed as a 3-point harness the submarine(crotch)strap is not used.

Suggested Mounting Configurations


H-Type Harness Specifications:
  • Each side of the lap belt is 42" long and will adjust down to 12".
  • The submarine(crotch) belt is 30" long and will adjust down to 14".
  • The shoulder harness straps are 80" long and will adjust down to 25".

    Y-Type Harness Specifications:
  • Each side of the lap belt is 42" long and will adjust down to 12".
  • The submarine(crotch) belt is 30" long and will adjust down to 14".
  • The shoulder harness straps are 89" long and will adjust down to 40".

    To Order:
  • Call:410-381-6700 8-5 EST Monday-Friday
  • Or use the secure on-line order form located at the end of section.


    • Color                    H-Type Item Number          Y-Type Item Number 
Black                        W9210D                       W9310D
Red                          W9210B                       W9310B 
Blue                         W9210C                       W9310C
Bolt Kit.                    (3)MH2                       (2)MH2
Underbody Reinforcement,Pair    RB1                          RB1
Harness Reinforcement Plate     RB3                          RB3

    Racing/Competition/Off Road Belts Price Color Order
    "H"-Type Racing Harness-W9210 Series. Requires 3 MH2 bolt kit per belt for mounting. $125.00ea
    "Y"-Type Racing Harness-W9310 Series. Requires 2 MH2 bolt kits per belt for mounting. $125.00ea
    Bolt Kit -MH2 Use w/W9210 and W9310 Series Racing Belts. $2.50ea
    Underbody Reinforcement Plate w/Attached Weld Nut.Pair. RB1. $25.00pr

    Return To Seat Belt Main Index Page


    All information detailed within this document is based on information believed to be accurate but accuracy is not guaranteed.All pictures,diagrams and item descriptions are protected property of The Andover Companies,Inc and are not to be duplicated in any manner without written permission.

    (racing 6-12-08)