On Sale Contact Us:EMail Call Us:(302) 629-8508
Main Index Page Hardware And Components Index Page Retractable Mounting Kits
Seat belt mounting hardware kits available for the installation of a non retractable lap seat belt, non retractable lap seat belt with shoulder harness, Y-harness non retractable lap seat belt with shoulder harness and 4-point non retractable lap seat belt with shoulder harness. A standard mounting hardware kit includes the required bolts, lock washers, nuts and oversize underbody reinforcing washers to install a seat belt for one person/position. A retrofit mounting hardware kit includes underbody reinforcing plates to add support to the mounting points which should be used when installing a seat belt in a vehicle that did not have seat belts dealer or factory installed.When using a retrofit mounting kit a standard mounting kit is not required.

Lap Seat Belt Mounting Kits




Standard Mounting Kits

Quantity:

Product Notes: Click on picture to enlarge.
  • One mounting kit required per seat belt.
  • MH2: Use when seat belt has a standard end fitting. Yellow zinc.
  • MH4: Use when seat belt has a standard end fitting. Zinc chromate.
  • MH3: Use when seat belt has a sister/snap hook end fitting. Attaches to floor mounted eyebolt.
    For product questions or ordering assistance please call (302)629-8508




  • Retrofit Mounting Kits

    Quantity:

    Product Notes: Click on picture to enlarge.
  • One retrofit kit required per seat belt.
  • 201K: Use when seat belt has a standard end fitting.
  • 203K: With curved steel plates with welnuts. Use when seat belt has a standard end fitting.
  • 205K: Use when seat belt has a sister/snap hook end fitting. Attaches to floor mounted eyebolt.
    For product questions or ordering assistance please call (302)629-8508


  • Lap Seat Belt With Shoulder Harness Mounting Kits



    Standard Mounting Kits

    Quantity:

    Product Notes: Click on the picture to enlarge.
  • One mounting kit is required per seat belt.
  • MH9: Use when seat belt has a standard anchor fitting.
  • MH10: Use when seat belt has a sister/snap hook end fitting. Attaches to floor mounted eyebolt.
    For product questions or ordering assistance please call (302)629-8508



  • Retrofit Mounting Kits

    Quantity:

    Product Notes: Click on picture to enlarge.
  • One retrofit mounting kit required per seat belt.
  • 301K: Use when seat belt has a standard end fitting.
  • 304K: Use when seat belt has a sister/snap hook end fitting. Attaches to floor mounted eyebolt.
    For product questions or ordering assistance please call (302)629-8508
  • Y-Harness Mounting Kit


    Quantity:

    Product Notes: Click on picture to enlarge.
  • One retrofit mounting kit required per seat belt.
  • 305K: Use when installing in a location not previously installed.
    For product questions or ordering assistance please call (302)629-8508
  • 4-Point Mounting Kit


    Quantity:

    Product Notes: Click on picture to enlarge.
  • One retrofit mounting kit required per seat belt.
  • 400K: Standard mounting kit.
  • 401K: Use when installing in a location not previously installed.
  • A standard mounting kit is not required when ising a retrofit kit.
    For product questions or ordering assistance please call (302)629-8508

  • On Sale Contact Us:EMail Call Us:(302) 629-8508
    Main Index Page Hardware And Components Index Page Retractable Mounting Kits


    Liability Disclaimer: The Andover Companies, and its subsidiaries assumes no responsibility for any damage due to the installation, either proper or improper, or for any damage or bodily injury arising from the use of any product. It is understood that the purchaser, installer and/or end user is responsible for the determination that the product purchased is suitable for its intended use and agrees to indemnify and hold The Andover Companies,Inc and its subsidiaries, harmless for any claim, action or demand arising from the installation and/or use of any product. There are no guarantees or warrantees on any product, implied or expressed, of fitness for a particular use with any such warrantees being specifically and expressly disclaimed. In the event any of the above limitations are held not enforceable our liability shall not exceed an amount equal to the amount paid to us for the product. Receipt of product or products confirm acceptance of disclaimer and liability transfer to purchaser, installer and/or end user.

    All information detailed within this document is based on information believed to be accurate but accuracy is not guaranteed. All pictures, diagrams and item descriptions are protected property of The Andover Companies,Inc and are not to be duplicated in any manner without written permission.

    (mounting-nonretractable 3-14-17)