Return To Main Index Page Contact Us: EMail Call Us:(302) 629-8508

Recreational Vehicle Seat Belts

Non retractable and retractable seat belts with or with out a shoulder harness that are available for bench, bucket, pedestal or sofa seats designed to replace a damaged or missing factory installed seat belt or to upgrade from a non retractable or retractable lap seat belt to a retractable lap seat belt with shoulder harness in a class A, class B, class C motorhome, conversion van, bus conversion and other recreational vehicles.

All of the seat belts and related hardware are new and manufactured to meet or exceed FMVSS (U.S. Federal Motor Vehicle Safety Standards) 209 and 302 with all seat belts manufactured or assembled in the USA.

When installing a seat belt where it was not previously installed or when a factory underbody or shoulder harness reinforcement plate is damaged or missing it is suggested that a RB1-1(each) or RB1(pair) underbody and or a RB3 shoulder harness reinforcement plate with attached weld nut be used to add support to all of the mounting points.


The bucket/pedestal seat retractable lap seat belt retractor and buckle side are mounted to the side of or slightly behind the seat on to an L-bracket which is required to mount the retractor upright, or directly to the seat frame depending on the application. A minimum clearance of 3 1/2" is required between where the retractor will be mounted and any interior trim panel to accommodate the size of the retractor.

The bucket/pedestal seat retractable lap seat belt with shoulder harness includes a retractor that can be mounted directly on to a flat interior trim panel or at the floor to a L-bracket. The L-bracket is required in order to mount the retractor upright. To accommodate the size of the retractor a minimum clearance of 3 1/2" is required between where the retractor will be mounted and any interior trim panel.

The bench/sofa seat retractable lap seat belt retractor side is mounted to the side of a seat to an L-bracket which is required to mount the retractor upright, or directly to the seat frame depending on the application. The buckle side goes through the gap between the seat back and the seat bottom to a floor mounting location. A minimum clearance of 3 1/2" is required between where the retractor will be mounted and any interior trim panel to accommodate the size of the retractor.

The bench/sofa seat retractable lap seat belt with shoulder harness requires a minimum clearance of 3 1/2" between the side of the seat and any interior trim panel to allow for clearance for the retractor. The retractor can be mounted directly on to a flat interior trim panel or at the floor to a L-bracket. The L-bracket is required in order to mount the retractor upright. The buckle side goes through the gap between the seat back and seat bottom to a floor mounting location.

Matching non retractable lap seat belts are available in extended lengths of 60",74" or 90" for use on a bench or sofa seat or where a retractable seat belt is not required.

To Order:
  • Call:(302)629-8508 8-5 EST Monday-Friday
  • Or use the secure on-line order form below.
  • Column-Description                                                                  Item Numbers
    A-Bucket/Pedestal Seat Retractable Lap Seat Belt                                    W8402 Series
    B-Bucket/Pedestal Seat Retractable Lap Seat Belt With Shoulder Harness              W8406 Series  
    C-Bench/Sofa Seat Retractable Lap Seat Belt                                         W8404 Series
    D-Bench/Sofa Seat Retractable Lap Seat Belt With Shoulder Harness                   W8407 Series   
    E-60" Long Matching Non Retractable Lap Seat Belt                                   W8401 Series
    F-74" Long Matching Non Retractable Lap Seat Belt                                   W8400 Series
    G-90" Long Matching Non Retractable Lap Seat Belt                                   W8420 Series 
    Mounting Kit For Non Retractable Lap Seat Belt. One Required Per Belt                        MH2
    Mounting Kit With L-Bracket For Retractable Lap Seat Belt. One Required Per Belt             200                                                                                                                        Mounting Kit With L-Bracket For Retractable Lap Seat Belt With Harness.One Required Per Belt 300               
    L-Bracket For Use To Adjust The Mounting Location Of The Buckle Side                         RB6
    Shoulder Harness Reinforcement Plate With Attached Weldnut.Each                              RB3
    Underbody Reinforcement Plate With Attached Weldnut.Each                                   RB1-1               
    Underbody Reinforcement Plate With Attached Weldnut.Pair                                     RB1               
    A color match to upholstery, existing seat belt or carpet is not be guaranteed. If a color match is critical it is suggested that a webbing sample be ordered. Click to view webbing colors or to order webbing samples.
    Color                              A        B        C        D        E        F        G 
    Black                           W8402B   W8406B   W8404B   W8407B   W8401B   W8400B   W8420B
    Blue                            W8402C   W8406C   W8404C   W8407C   W8401C   W8400C   W8420C
    Burgundy/Maroon                 W8402D   W8406D   W8404D   W8407D   W8401D   W8400D   W8420D
    Gray                            W8402E   W8406E   W8404E   W8407E   W8401E   W8400E   W8420E
    Orange                          W8402J   W8406J   W8404J   W8407J   W8401J   W8400J   W8420J 
    Red                             W8402G   W8406G   W8404G   W8407G   W8401G   W8400G   W8420G
    Tan                             W8402F   W8406F   W8404F   W8407F   W8401F   W8400F   W8420F
    Mounting Kit                       200      300      200      300      MH2      MH2      MH2   
    


    Price Color Order
    Column A: Bucket/Pedestal Seat Retractable Lap Seat Belt-W8402 Series. $39.00ea
    Column B: Bucket/Pedestal Seat Retractable Lap Belt With Shoulder Harness-W8406 Series. $65.00ea
    Column C: Bench/Sofa Seat Retractable Lap Seat Belt-W8404 Series. $37.50ea
    Column D: Bench/Sofa Seat Retractable Lap Seat Belt With Shoulder Harness-W8407 Series. $65.00ea
    Column E: 60" Long Non Retractable Lap Seat Belt-W8401 Series. $18.00ea
    Column F: 74" Long Non Retractable Lap Seat Belt-W8400 Series. $19.00ea
    Column G: 90" Long Non-Retractable Lap Seat Belt-W8420 Series. $21.00ea
    Mounting Hardware Price Order
    MH2 Mounting Kit. One Required Per Non Retractable Lap Seat Belt. $2.50ea
    200 Mounting Kit With L-Bracket.One Required Per Retractable Lap Belt. $4.25ea
    300 Mounting Kit With L-Bracket. One Required Per Retractable Lap Belt With Shoulder Harness. $5.25ea
    RB6: 1 1/2" L-Bracket. $2.50ea
    RB1-1: Underbody Reinforcement Plate w/Attached Weldnut.Each. $14.50ea
    RB1: Underbody Reinforcement Plates w/Attached Weldnut.Pair. $25.00pr
    RB3: Shoulder Harness Reinforcement Plate w/Attached Weldnut.Each. $12.00ea


    Liability Disclaimer: The Andover Companies, Inc., and its subsidiaries assume no responsibility for any damage due to the installation, either proper or improper, or for any damage or bodily injury arising from the use of any product(s). The purchaser, installer and/or end user is responsible for the determination that any product(s) purchased is suitable for, or the fitness of, any product(s) purchased for its intended use and agrees to indemnify and hold The Andover Companies, Inc and its subsidiaries, harmless from any claim, action or demand arising from the installation and/or use of any product(s). In the event any of the above limitations are held not enforceable our liability shall not exceed an amount equal to the amount paid to us for the product(s). Receipt of product(s) confirms the acceptance of this disclaimer and the confirmation of the understanding of the full and complete liability transfer to purchaser, installer and/or end user.

    All information detailed within this document is based on information believed to be accurate but accuracy is not guaranteed.All pictures,diagrams and item descriptions are protected property of The Andover Companies,Inc and are not to be duplicated in any manner without written permission.

    Return To Seat Belt Main Index Page


    (motorhome 8-12-12)