Main Seat Belt Index Page On Sale Contact Us:EMail Call Us:(302) 629-8508
Buckles End Fittings Extenders Mounting Brackets,Kits And Hardware Webbing
Seat belt hardware and components to include adjusters, bezels, cable and bracket end buckles, vintage lift buckle with a black hammertone coated lid, vintage lift buckles with a bright chrome or satin lid, vintage lift buckles with color matched lids with a GM Bowtie insert, plastic capped color matched push button buckles, metal push button buckles with a starburst design or a GM logo on the press area, seat belt webbing cleaner, fixed floor mounting end fittings with a yellow zinc or chrome finish, sister and snap hook eyebolt floor mounting end fittings in a yellow zinc or chrome finish, webbing length extenders, mounting bolts, mounting kits, retrofit mounting kits, automatic ALR and emergency ELR retractors, vintage style "Roll-A-Belt" clip on webbing retractors, underbody and shoulder harness reinforcing plates, 3 panel webbing, 4 panel webbing, 7 panel webbing plus more.

Adjuster: Inline

Quantity:

Product Notes: ADJ4 Series
  • Click on picture to enlarge
  • Inline webbing length adjuster.
  • Available with black,blue,gray,maroon,red or a tan cover.
  • Requires the cutting and re-stitching of webbing to install.
  • Not guaranteed to match excisting seat belt or interior.
  • Not Returnable
    For product questions or ordering assistance call (302)629-8508
  • Adjuster: Latch Stop

    Quantity:

    Product Notes: ADJ3 Series
  • Click on picture to enlarge
  • Keeps shoulder harness latch from sliding down webbing when belt is not in use.
  • The seat belts do not need to be removed in order to install.
  • Does not alter the retractor safety features.
    For product questions or ordering assistance call (302)629-8508


  • Bezel

    Quantity:

    Product Notes: BZ-1 Series
  • Click on picture to enlarge
  • Used to protect webbing from fraying.
  • Available in black and tan. Can be painted to match.
  • Install on a deck lid if retractor is trunk mounted.
  • Measurements shown are approximate.
    For product questions or ordering assistance call (302)629-8508


  • Buckles And Buckle Components

    Click Here or on picture to view available buckles and buckle components.




    Buckle Side: Push Button

    Quantity:

    Product Notes:
    To be used with our 84 series push button seat belts only.
  • Click on picture to enlarge
  • 8395B 9" long with sleeve is available in black only.
  • Available in lengths of 12",18",25" and 33".
  • Available in black,blue,gray,maroon,red and tan.
  • Sleeved buckle sides include 12" removeable color matched sleeve.
  • Buckles are color matched to the webbing color except for the red buckle which is black.
  • Lengths listed are approximate.
  • Not Returnable
    For product questions or ordering assistance call (302)629-8508
  • Buckle Side: End Release Bracket And Cable

    Quantity:

    Product Notes:
    To use with our cable buckle seat belts only.
  • Click on picture to enlarge
    Available lengths;
  • 8184-5:5" Long (actual end to end 5.25). Bracket length 2". .
  • 8184-7:7" Long (actual end to end 7.25). Cable length 4".
  • 8184-9:9" Long (actual end to end 9.75). Cable length 6 3/8".
  • 8184-13:13" Long (actual end to end 13.25). Cable length 9 5/8".
  • 8184-18:18" Long (actual end to end 18.00). Cable length 14 7/8".
  • Lengths listed are approximate.
  • Not Returnable
    For product questions or ordering assistance call (302)629-8508
  • Buckle Side: Cover/Sleeve

    Quantity:

    Product Notes: 8391 Series
  • Click on picture to enlarge
  • 9": Measures 8"L X 2 1/8"W with 1 7/8" wide buckle opening.Black only.
  • 12": Measures 11 1/2"L X 2 1/8"W with 1 7/8" wide buckle opening.
  • 12" available in black,blue,grey,maroon,red,dark tan and tan.
  • Includes color matched removeable bolt hole cover.
  • Not Returnable
    For product questions or ordering assistance call (302)629-8508


  • Cleaner: Seat Belt Webbing

    Quantity

    Product Notes:
  • Biodegradable spray on webbing cleaner specifically for OEM webbing.
  • Non-flammable and non-hazardous concentrate. Low foaming. VOC compliant.
  • The seat belts do not require removal from the vehicle to use.
  • Non-caustic. Will not harm the webbing fibers.
  • Can be used full strength as webbing spot stain remover.
  • Includes 32oz HDPE plastic bottle and 4oz refillable plastic bottle with mist sprayer.
  • Trigger sprayers can be ordered separately to use with 32oz bottle.
  • Not Returnable
    For product questions or ordering assistance call (302)629-8508

    To use: Shake then spray the area to be cleaned. Let sit for approximately 15 seconds and then wipe off with a clean terry cloth. Depending on the severity of the stain the cleaner can be used full strength or diluted one part water to one part cleaner.



  • Cover: End Fitting

    Quantity:

    Product Notes: CVR Series
  • Click On Picture To Enlarge
  • Will not fit square or rectangular end fittings.
  • Measures at widest point 1 7/8". Length 2".
  • Snaps on to the bolt head to cover the bolt and the end fitting.
    For product questions or ordering assistance call (302)629-8508


  • Cover: Retractor

    Quantity:

    Product Notes:
    Click On Picture To Enlarge
    CVR200
  • Black plastic. Paint to match.
  • Snaps on to a standard retractor to cover the top and sides.
  • Does not require the cutting of the webbing to install.
  • Installation instructions included.
  • Measures 4 7/8W x 3 7/8L x 2 1/4H
    CVR300
  • Black plastic. Paint to match.
  • Requires the cutting and the re-stitching of webbing to install.
  • Completely encloses the top, sides and underside of retractor.
  • Measures 4 1/4W x 4 1/2L(includes 1" extention) x 2 3/4H
    For product questions or ordering assistance call (302)629-8508


  • End Fittings

    Click Here or on picture to view seat belt floor anchor end fittings.


    Extenders

    Click Here or on picture to view seat belt length extenders.


    Mounting Bolts And Kits,Brackets,Retrofit Mounting Kits And Related

    Click Here or on picture to view mounting hardware.


    Reinforcement Plates

    Quantity:

    Add MH1 Mounting Bolt.7-16 x 20 x 1".Yellow Zinc. $1.00ea
    Add MH1-1 Mounting Bolt.7-16 x 20 x 1 1/2".Yellow Zinc $1.25ea
    Add MH7 Mounting Bolt.7-16 x 20 x 1".Zinc Chromate $1.00ea
    Add MH11 Mounting Bolt.7-16 x 20 x 1 1/2".Zinc Chromate $1.30ea Add MH12 Lock Washer.Zinc Chromate $.35ea

    Product Notes:
  • Click on picture to enlarge
  • RB1-1: Curved steel with attached nut.Measures 4 1/2"L x 3"W.
  • RB1: Same as RB1-1 except pair.
  • RB3: Steel with attached nut.Measures 4 1/2"L(not including tip) x 1 1/2"W.
  • RB4: Threaded to accept a 7/16th fine thread bolt. Measures 3"L x 1 1/2"W.
    For product questions or ordering assistance call (302)629-8508


  • Retractors: Clip On

    Quantity:

    Product Notes:
  • CR1: Clip-on webbing.Black plastic. Measures 3" x 2 1/2".
  • 80296: Clip-on webbing.Chrome 1950-60's style "Roll-A-Belt".
  • Installtion instructions included.
  • Not Returnable
    For product questions or ordering assistance call (302)629-8508

  • Retractor With Cover: ALR-Automatic Locking

    Quantity:

    Product Notes: CR3
  • Click on picture to enlarge
  • Includes removeable(must be cut) full retractor black plastic cover.
  • Webbing length locks once pulled and released.
  • To adjust length once locked, pull webbing slightly to release webbing back to retractor to re-pull.
  • Does not include the metal male latch.
  • Measures without cover 2 1/4" H x 3 1/4" W x 3 5/8" L.
  • Measures with cover 2 3/8" H x 3 5/8" W x 4 5/8" L.
  • Length includes bolt hole extension on base.Deduct 1" for actual length.
  • Mounting base has one 1/2" and two 1/4" mounting holes.
  • Measurements listed are approximate.
  • Comes with a small amount of webbing to maintain the tension.
  • Not Returnable
    For product questions or ordering assistance call (302)629-8508
  • Retractor With Cover: ELR-Emergency Locking

    Quantity:

    Product Notes: CR2
  • Click on picture to enlarge
  • Includes removeable(must be cut) plastic webbing only black cover.
  • See CVR200 or CVR300 cover retractor for full covers.
  • Allows for movement once buckled.
  • Web sensitive. Locks on sudden movement.
  • Does not include the male latch end.
  • Measures without cover 2 3/8" H x 3 5/8" W x 3 1/2" L.
  • Mounting base has one 1/2" and two 1/4" mounting holes.
  • Measurements listed are approximate.
  • Includes a small amount of black webbing to maintain tension.
  • Not Returnable
    For product questions or ordering assistance call (302)629-8508


  • Shoulder Harness 2" DPE (Door Post Extension) And Covers

    Quantity:

    Add MH6-1 DPE Shoulder Bolt. Yellow Zinc $2.25ea
    Add MH6 DPE Shoulder Bolt.Zinc Chromate $2.50ea

    Product Notes: 8393 Series
  • Click on picture to enlarge
  • 8393 DPE bracket and 8393-1 series covers are sold separately.
  • DPE bracket length determines the distance the shoulder harness webbing lowers from mounting point prior to going over the shoulder.
  • Lowers the webbing approximately 1 3/8" from mounting location.
  • Has 5/8" bolt hole.
  • Requires the cutting and the re-stitching of the webbing to install.
  • For use with standard 1 15/16th(1 7/8th) wide automotive webbing.
  • Shoulder bolt allows the DPE bracket to swivel once mounted.
  • 8393-1 series covers will fit most 2" DPE brackets.
  • Not Returnable
    For product questions or ordering assistance call (302)629-8508
  • Shoulder Harness 8" DPE (Door Post Extension) Bracket With Cover

    Quantity:

    Add MH6-1 Shoulder Bolt.Yellow Zinc $2.25ea
    Add MH6 Shoulder Bolt.Zinc Chromate $2.50ea

    Product Notes: 8382 Series
  • Click on picture to enlarge
  • The DPE bracket determines the distance the shoulder harness webbing lowers from mounting point prior to going over the shoulder.
  • Lowers the webbing approximately 7 1/4" from mounting location.
  • Has 5/8" bolt hole.
  • Requires the cutting and re-stitching of the webbing to install.
  • For use with standard 1 15/16th(1 7/8th) wide automotive webbing.
  • Shoulder bolt allows the DPE bracket to swivel once mounted.
  • Steel plate covered with molded hard plastic.Includes bolt hole cover.
  • Available in black, grey, maroon and tan.
  • Not Returnable
    For product questions or ordering assistance call (302)629-8508


  • Webbing Guide Loop

    Quantity:

    Product Notes: 8389 Series Click on picture to enlarge
  • Slides over the webbing to retain extra webbing after adjustment.
  • Available in black,blue,grey,maroon,red or tan.
  • Color not guaranteed to match excisting seat belt or interior.
  • Not Returnable
    For product questions or ordering assistance call (302)629-8508


  • Webbing

    Click Here or on picture to view 3,4 and 7 panel seat belt webbing.

    Buckles End Fittings Extenders Mounting Brackets,Kits And Hardware Webbing


    Liability Disclaimer: The Andover Companies, and its subsidiaries assumes no responsibility for any damage due to the installation, either proper or improper, or for any damage or bodily injury arising from the use of any product. It is understood that the purchaser, installer and/or end user is responsible for the determination that the product purchased is suitable for its intended use and agrees to indemnify and hold The Andover Companies,Inc and its subsidiaries, harmless for any claim, action or demand arising from the installation and/or use of any product. There are no guarantees or warrantees on any product, implied or expressed, of fitness for a particular use with any such warrantees being specifically and expressly disclaimed. In the event any of the above limitations are held not enforceable our liability shall not exceed an amount equal to the amount paid to us for the product. Receipt of product or products confirm acceptance of disclaimer and liability transfer to purchaser, installer and/or end user.

    All information detailed within this document is based on information believed to be accurate but accuracy is not guaranteed. All pictures, diagrams and item descriptions are protected property of The Andover Companies,Inc and are not to be duplicated in any manner without written permission.

    (hardware 7-17-13)