Golf cart non retractable and retractable lap seat belts available with a top release push button or a end release cable/bracket side buckle to fit most EZ-Go, Club Car and Yamaha models. Many states now require that seat belts be installed if a golf cart is to be used on a roadway even if the roadway is located in a private community.All of the seat belts and related hardware are new and manufactured to meet or exceed FMVSS (U.S. Federal Motor Vehicle Safety Standards) 209,302 and SAE 386 with most manufactured or assembled in the USA.
Push Button Non-Retractable Lap Seat Belts(Column A and B) are available in extended lengths of 60" and 74" long. All of the plastic pieces are color matched to the webbing color except for on the red seat belts where the plastic pieces are black. One MH2-YZ bolt kit is required for per seat belt for mounting.
Push Button Retractable Lap Seat Belt (Column C) with a (ALR) automatic locking retractor that locks once pulled to the required position available with a 9" or 12" long sleeved buckle side. The retractor base has a mounting plate extension with a bolt hole so that it can be mounted flat to a surface and is covered with a boot to protect the internal components from the elements. All of the plastic pieces are color matched to the webbing color except for on the red seat belts where those pieces are black.The buckle style and webbing colors match those used on the non-retractable lap belts that are listed under Column A and B that can be used in a rear facing seat when a retractable lap seat belt is being installed in the front.One MH2-YZ mounting kit is required when the retractor is being bolted on to a flat surface.
End Release Buckle Retractable Lap Seat Belt (Column E and F) with a (ALR) automatic locking retractor which locks once pulled to the required position available with a 5" and 9" long cable/bracket side. The retractor base has a mounting plate extension with a bolt hole so that it can be mounting flat to a surface and is covered with a boot to protect the internal components from the elements.All of the plastic pieces are black regardless of the webbing color.One MH2-YZ mounting kit is required When the retractor is being mounted on to a flat surface.
If one of the factory seat belt reinforcing mounting plates is damaged or missing a RB4 flat threaded reinforcing plate with corner rivet holes can be used to add support to the mounting locations. When purchasing RB4 reinforcing plates a MH2-YZ mounting kit is not required. Order one MH11 bolt and MH12 lock waher per RB4 reinforcing plate.
Call:(302) 629-8508 8-5 EST Monday-Friday
Or use the secure on-line order form below.
Column Description Item Number Series
Push Button Non-Retractable Lap Seat Belts
A 60" Long Push Button Buckle Non-Retractable Lap Belt W8401
B 74" Long Push Button Buckle Non-Retractable Lap Belt W8400
To view W8258 series webbing colors click here.
Push Button Retractable Lap Seat Belts
C Retractable Lap Belt With 9" Sleeved Buckle Side(Black Only) W8408
D Retractable Lap Belt With 12" Sleeved Buckle Side W8419
End Release Buckle Cable/Bracket Side Retractable Lap Seat Belts
E Retractable Lap Belt With 5" Long Buckle Side W8258-5
F Retractable Lap Belt With 9" Long Buckle Side W8258-9
To view W8400/W8401/S8408 And W8419 series webbing colors clik here .
Color A B C D E F
Black W8401B W8400B W8408B W8419B W8258B-5 W8258B-9
Blue W8401C W8400C N/A W8419C W8258C-5 W8258C-9
Red,Bright W8401G W8400G N/A W8419G W8258N-5 W8258N-9
Tan W8401F W8400F N/A W8419F W8258L-5 W8258L-9
Mounting Kit MH2-YZ MH2-YZ MH2-YZ MH2-YZ MH2-YZ MH2-YZ
Liability Disclaimer: The Andover Companies, and its subsidiaries assumes no responsibility for any damage due to the installation, either proper or improper, or for any damage or bodily injury arising from the use of any product. It is understood that the purchaser, installer and/or end user is responsible for the determination that the product purchased is suitable for its intended use and agrees to indemnify and hold The Andover Companies,Inc and its subsidiaries, harmless for any claim, action or demand arising from the installation and/or use of any product. There are no guarantees or warrantees on any product, implied or expressed, of fitness for a particular use with any such warrantees being specifically and expressly disclaimed. In the event any of the above limitations are held not enforceable our liability shall not exceed an amount equal to the amount paid to us for the product. Receipt of product or products confirm acceptance of disclaimer and liability transfer to purchaser, installer and/or end user.
All information detailed within this document is based on information believed to be accurate but accuracy is not guaranteed. All pictures, diagrams and item descriptions are protected property of The Andover Companies,Inc and are not to be duplicated in any manner without written permission.
Retrun To The Main Seat Belt Index Page