GoKart non retractable and retractable lap only and lap with shoulder harness seat belts that will accomodate most installation configurations on American Sportsworks, Carter, Kandi, Ken-Bar, Manco, Murray and TrailMaster gocarts, ATV and buggies. All of the seat belts and related hardware are new and manufactured to meet or exceed FMVSS (U.S. Federal Motor Vehicle Safety Standards) 209,302 and SAE 386 with most manufactured or assembled in the USA.

On most installations the seat belts will attach to an existing factory pre-drilled frame support location. If the mounting point for the shoulder harness pivot or the shoulder harness retractor that attaches to the roll bar above and behind the seat does not exist the drilling of the roll bar or the welding of a bracket will be required.
Lap Only Seat Belts
 
Non-Retractable Lap Only Seat Belts with a top release buckle in extended lengths of 60" and 74" long. The buckle has a black plastic cap for durability and a metal underside for strength. On the red and orange seat belts,except for the webbing the seat belt is black. See mounting hardware information below.
Retractable Lap Only Seat Belts with an automatic locking retractor with protective boot. The buckle sides available are a 5" long end release with bracket and a 9" or 13" long end release with cable. On the red and orange seat belts, except for the webbing the seat belt is black. See mounting hardware information below.
Mounting Hardware Information:
If both ends will be bolted flat on to the side of the seat one MH2 mounting kit per seat belt is required.
If both ends will be bolted flat surface on the floor two RB2 L-brackets and two MH2 mounting kits per seat belt is required.
If both ends will be bolted directly to a threaded factory reinforcement plate two MH1 bolts and two MH1-2 lock washers per seat belt is required.
To Order:
Call:(302)629-8508 8-5 EST Monday-Friday
Or use the secure on-line order form below.
Description Item Number
60" Long Non-Retractable Lap. Black Webbing. W8401B
60" Long Non-Retractable Lap. Bright Red Webbing W8401G
60" Long Non-Retractable Lap. Safety Orange Webbing W8401J
74" Long Non-Retractable Lap With Black Webbing. W8400B
74" Long Non-Retractable Lap With Bright Red Webbing W8400G
74" Long Non-Retractable Lap With Safety Orange Webbing W8400J
Retractable Lap With 5" End Release Buckle Side.Black Webbing W8258B-5
Retractable Lap With 5" End Release Buckle Side.Bright Red Webbing W8258N-5
Retractable Lap With 5" End Release Buckle Side.Safety Orange Webbing W8258X-5
Retractable Lap With 9" End Release Buckle Side.Black Webbing W8258B-9
Retractable Lap With 9" End Release Buckle Side.Bright Red Webbing W8258N-9
Retractable Lap With 9" End Release Buckle Side.Safety Orange Webbing W8258X-9
Retractable Lap With 12" End Release Buckle Side.Black Webbing W8258B-12
Retractable Lap With 12" End Release Buckle Side.Bright Red Webbing W8258N-12
Retractable Lap With 12" End Release Buckle Side.Safety Orange Webbing W8258X-12
| Lap Only Seat Belts |
Price |
Color |
Order |
|
|
3-Point and 4-Point Non-Retractable Lap Belt With Shoulder Harness
   
3-Point Lap With Shoulder Harness-Push Button Buckle:(picture 1) The shoulder harness mounting bracket attaches on to the front or the side of the roll bar. On the red and orange seat belts, except for the webbing the seat belt is black. Requires one MH9 mounting kit per seat belt.Also see mounting hardware information below.
3-Point Lap With Shoulder Harness-Chrome Lift Lid Buckle:(picture 2) The shoulder harness mounting bracket attaches on to the front or the side of the roll bar. On the red and orange seat belts, except for the webbing the seat belt is black. Requires one MH9 mounting kit per seat belt.Also see mounting hardware information below.
3-Point Y-Harness-Push Button Buckle:(picture 3) The shoulder harness mounting bracket attaches on to the front of the roll bar located above and behind the seat. On the red and orange seat belts, except for the webbing the seat belt is black. Requires on MH9 mounting kit per seat belt.Also see mounting hardware information below.
3-Point Y-Harness-Chrome Lift Lid Buckle:(picture 4) The shoulder harness mounting bracket attaches on to the front of the roll bar located above and behind the seat. On the red and orange seat belts, except for the webbing the seat belt is black. Requires on MH9 mounting kit per seat belt.Also see mounting hardware information below.
4-Point Lap Belt With Harness-Push Button Buckle: Two separate shoulder harness mounting brackets attach to the front of the roll bar located above and behind the seat. On the red and orange seat belts, except for the webbing the seat belt is black. Requires two MH2 mounting kits per seat belt. Also see mounting hardware information below.
Mounting Hardware Information:
It may be necessary to purchase bolts longer than supplied in the mounting kit depending on the thickness of the roll bar.
If the lap belt sides are not being attached flat to the side of the seat a RB2 L-bracket may be required to mount each side upright.
If re-using all factory mounting locations mounting kits are not required, Order one MH1 and one MH1-2 lock washer for each mounting point.
To Order:
Call:(302)629-8508 8-5 EST Monday-Friday
Or use the secure on-line order form below.
Description Item Number
3-Point Non-Retractable with Push Button Buckle.Black Webbing W8279B
3-Point Non-Retractable with Push Button Buckle.Bright Red Webbing W8279N
3-Point Non-Retractable with Push Button Buckle.Safety Orange Webbing W8279X
3-Point Non-Retractable with Chrome Lift Buckle.Black Webbing W8807B
3-Point Non-Retractable with Chrome Lift Buckle.Bright Red Webbing W8807N
3-Point Non-Retractable with Chrome Lift Buckle.Safety Orange Webbing W8807X
3-Point "Y" Non-Retractable with Push Button Buckle.Black Webbing W8816B
3-Point "Y" Non-Retractable with Push Button Buckle.Bright Red Webbing W8816N
3-Point "Y" Non-Retractable with Push Button Buckle.Safety Orange Webbing W8816X
3-Point "Y" Non-Retractable with Chrome Lift Buckle.Black Webbing W8814B
3-Point "Y" Non-Retractable with Chrome Lift Buckle.Bright Red Webbing W8814N
3-Point "Y" Non-Retractable with Chrome Lift Buckle.Safety Orange Webbing W8814X
4-Point Non-Retractable With Push Button Buckle.Black Webbing W8412B
4-Point Non-Retractable With Push Button Buckle.Bright Red Webbing W8412N
4-Point Non-Retractable With Push Button Buckle.Safety orange Webbing W8412X
| 3-Point And 4-Point Non-Retractable Lap Belt With Shoulder Harness Seat Belts |
Price |
Color |
Order |
|
|
Retractable Lap Belt And Shoulder Harness
Available in the following mounting configerations to accomodate most installations. When selecting the mounting configuration to purchase when upgrading from a lap only seat belt or when seat belts were not previously installed, it is suggested that a seat belt with a upper roll bar mounted retractor be selected since clearance between the seat and the side protective bar is not required.
With Floor Mounted Retractor:The retractor, which is covered by a protective boot is mounted on to the floor to the side of the seat in an upright position and the webbing comes out of the top of the retractor. The shoulder harness mounting bracket attaches to the side or to the front of the roll bar above and behind the seat. The top release push button buckle is available in lengths of 9" and "12" long and are covered with a removeable hard plastic protective sleeve. On the red and the orange seat belts, except for the webbing the seat belt is black. Requires one 300 mounting kit per seat belt. Also see mounting hardware information below.
With Upper Roll Bar Mounted Retractor: The retractor, which is covered by a protective boot, mounts directly on to the side of the roll bar located above and behind the seat. The top release push button buckle is available in lengths of 9" and "12" long and are covered with a removeable hard plastic protective sleeve. On the red and the orange seat belts, except for the webbing the seat belt is black. Requires one MH9 mounting kit per seat belt. Also see mounting hardware information below.
Mounting Hardware Information:
It may be necessary to purchase bolts longer than supplied in the mounting kit depending on the thickness of the roll bar.
If re-using all the factory mounting locations mounting kits are not required, Order one MH1 and one MH1-2 lock washer for each mounting point.
If the buckle side is not being bolting flat to the side of the seat a RB2 L-bracket may be required to mount the buckle side upright.
To Order:
Call:(302)629-8508 8-5 EST Monday-Friday
Or use the secure on-line order form below.
With The Retractor Mounted By The Seat Item Number
Retractable Lap With Harness With 9" Buckle Side.Black Webbing W8422B/8395B
Retractable Lap With Harness With 9" Buckle Side.Bright Red Webbing W8422G/8395B
Retractable Lap With Harness With 9" Buckle Side.Safety Orange Webbing W8422J/8395B
Retractable Lap With Harness With 12" Buckle Side.Black Webbing W8413B
Retractable Lap With Harness With 12" Buckle Side.Bright Red Webbing W8413G
Retractable Lap With Harness With 12" Buckle Side.Safety orange Webbing W8413J
With The Retractor Mounted To The Upper Roll Bar Item Number
Retractable Lap With Harness With 9" Buckle Side.Black Webbing W8426B/W8395B
Retractable Lap With Harness With 9" Buckle Side.Bright Red Webbing W8426G/W8395B
Retractable Lap With Harness With 9" Buckle Side.Safety Orange Webbing W8426J/W8395B
Retractable Lap With Harness With 12" Buckle Side.Black Webbing W8426B/W8399B
Retractable Lap With Harness With 12" Buckle Side.Bright Red Webbing W8426N/8399B
Retractable Lap With Harness With 12" Buckle Side.Safety orange Webbing W8426J/8399B
| Retractable Lap Belt And Shoulder Harness Seat Belts |
Price |
Color |
Order |
|
|
Liability Disclaimer: The Andover Companies, and its subsidiaries assumes no responsibility for any damage due to the installation, either proper or improper, or for any damage or bodily injury arising from the use of any product. It is understood that the purchaser, installer and/or end user is responsible for the determination that the product purchased is suitable for its intended use and agrees to indemnify and hold The Andover Companies,Inc and its subsidiaries, harmless for any claim, action or demand arising from the installation and/or use of any product. There are no guarantees or warrantees on any product, implied or expressed, of fitness for a particular use with any such warrantees being specifically and expressly disclaimed. In the event any of the above limitations are held not enforceable our liability shall not exceed an amount equal to the amount paid to us for the product. Receipt of product or products confirm acceptance of disclaimer and liability transfer to purchaser, installer and/or end user.
All information detailed within this document is based on information believed to be accurate but accuracy is not guaranteed. All pictures, diagrams and item descriptions are protected property of The Andover Companies,Inc and are not to be duplicated in any manner without written permission.
Return To Main Seat Belt Index Page
(gocart 8-14-11)
|