Additional Safety Switch Seat Belts Additional Non Safety Switch Seat Belts Seat Belt Index Page Contact Us:EMail Call Us:(302) 629-8508

Seat belts for forklifts including most Caterpillar, Hyster, Mitsubishi, Nissan, Sellick, Toyota and Yale fork lifts, order pickers, pallet jacks, reach trucks and sideloaders. Seatbelt styles include non retractable lap seat belts with top release push button buckle and retractable lap seat belts with end press release fixed length bracket buckle that is also avalable with an open or closed micro safety switch. All of the seat belts listed are assembled or manufactured in the USA.

Click On Picture To Enlarge When a factory underbody reinforcing plate is damaged or missing a RB4 flat threaded reinforcing plate with corner rivet attachment holes can be used to add support to the mounting locations.

With Top Release Push Button Buckle


Specifications: Click On Picture To Enlarge
  • Available with black or safety orange webbing.
  • The retractor boot, buckle side slleve and all plastic pieces except for the buckle press area are black.
  • The retractable seat belts are available with a 9" or 12" long fixed buckle side with removeable protective webbing sleeve.
  • Retractor is (ALR) automatic locking protected by a boot that measures 4" wide x 2 1/2" tall x 3 3/4" wide.
  • The webbing when fully extended from the retractor measures 52" long and can be re-adjusted until extended 16".
  • MH2-YZ mounting kit should be used when attaching flat to the side of seat.
  • 200K mounting kit should be used when attaching the retractor upright to the floor to the side of seat.
  • MH2-YZ or 200K mounting kits are not required when purchasing RB4 reinforcing plates. Order 1 MH11 bolt and MH12 lock washer per plate.
  • Specialty brackets and extensions are listed at end of section to adjust the mounting position or location.
  • Lengths listed are approximate
    Column         Description                                                    Item Number Series
       A           60" Long Non Retractable Lap Belt                                    W8401      
       B           74" Long Non Retractable Lap Belt                                    W8400          
       C           Retractable Lap Belt With 9" Long Sleeved Buckle Side                W8408               
       D           Retractable Lap Belt With 12" Long Sleeved Buckle Side               W8411
    

    To Order:
  • Call:(302) 629-8508 8-5 EST Monday-Friday
  • Or use the secure on-line order form below.
  • Color                                  A         B         C         D  
    Black                               W8401B    W8400B    W8408B    W8411B          
    Safety Orange                       W8401J    W8400J    W8408J    W8411B          
    
    Mounting Kit. Seat Side. Per Belt MH2-YZ MH2-YZ MH2-YZ MH2-YZ Mounting Kit. To Floor. Per Belt 200K 200K 200K 200K Body Reinforcement Plate RB4 RB4 RB4 RB4 Bolt Only. Use With RB4 Plate MH11 MH11 MH11 MH11 Lock Washer. Use With RB4 Plate. MH12 MH12 MH12 MH12
    With Top Release Push Button Buckle Price
    W8401 Series: 60" Long Non Retractable Lap Belt. $18.00ea
    W8400 Series: 74" Long Non Retractable Lap Belt. $19.00ea
    W8408 Series: Retractable Lap Seat Belt. 9"Sleeved Buckle Side. $42.00ea
    W8411 Series: Retractable Lap Seat Belt.12" Sleeved Buckle Side. $40.00ea
    MH2-YZ Mounting Kit: Use When Attaching To Side Of Seat. Per Belt. $3.25ea
    200K Mounting Kit: For Use When Mounting Retractor Upright To Floor. Per Belt. $4.25ea
    RB4: Reinforcing Plate. Order One MH11 Bolt And MH12 Lock Washer Per Plate. $7.50ea
    MH11 Bolt: Use With RB4 Reinforcing Plate. $1.30ea
    MH12 Lock Washer: Use With RB4 Reinforcing Plate. $.35ea

    With End Release Bracket Buckle


    Specifications: Click On Picture To Enlarge
  • Available with black webbing only.
  • The retractor is (ALR) automatic locking covered with protective boot.
  • MH2-YZ mounting kit should be used when attaching flat to the side of seat.
  • 200K mounting kit should be used when attaching the retractor upright to the floor to the side of seat.
  • MH2-YZ or 200K mounting kits are not required when purchasing RB4 reinforcing plates. Order one MH11 bolt and MH12 lock washer per plate.
  • Specialty brackets and extensions are listed at end of section to adjust the mounting position or location.
  • All measurements listed are approximate.
    W8714 Only
  • The webbing when fully extended measures 45" long and can be re-adjusted until extended 16".
  • Buckle with extension measures 7 3/4" long end to end with 1/2" mounting hole.
  • Retractor measures 3 5/8" wide x 2" tall x 2 1/2" long with 3 3/4" extension with 1/2" mounting hole.
    W8715 Only
  • The webbing when fully extended measures 52" long and can be adjusted until extended 16".
  • Buckle with extension measures 5 1/4" long end to end with 1/2" mounting hole.
  • Retractor measures 3 3/4" wide x 2 1/2" tall x 4" long with 1/2" mounting hole.

    To Order:
  • Call:(302) 629-8508 8-5 EST Monday-Friday
  • Or use the secure on-line order form below.
  • Item Number/Description  
    W8714B      Retractable Lap Belt With 7 3/4" Long Buckle Side. Black Webbing                    
    W8715B      Retractable Lap Belt With 5 1/2" Long Buckle Side. Black Webbing    
    MH2-YZ      Mounting Kit. When Attaching To Seat Side. Per Belt                                
    200K        Mounting Kit. When Mounting Retractor Upright. Per Belt                                                 
    RB4         Body Reinforcement Plate                                                   
    MH11        Bolt Only. Use With RB4 Plate                                             
    MH12        Lock Washer. Use With RB4 Plate                                           
    
    With Bracket End Release Buckle Price
    W8715 Series: Retractable Lap Belt With 5 1/4" Long Buckle Side. $40.00ea
    W8714 Series: Retractable Lap Belt With 7 3/4" Buckle Side. $42.50ea
    MH2-YZ Mounting Kit: For Use When Attaching To Side Of Seat. Per Belt. $3.25ea
    200K Mounting Kit: For Use When Mounting Retractor To Floor. Per Belt. $4.25ea
    RB4: Reinforcing Plate. Use One MH11 Bolt And MH12 Lock Washer Per Plate. $7.50ea
    MH11 Bolt: Use With RB4 Reinforcing Plate. $1.30ea
    MH12 Lock Washer: Use With RB4 Reinforcing Plate. $.35ea


    With End Release Cable Buckle With Closed Or Open Micro Safety Switch


    Specifications: Click On Picture To Enlarge
  • Includes the retractor with protective boot and buckle with 5 amp two wire weather protected plug connector.
  • Available with a closed or open circuit micro safety switch.
  • Webbing colors available include black or safety orange.
  • All of the plastic pieces except for the buckle red press area are black.
  • The buckle side measures 9" long with a 1/2" mounting hole at the end.
  • The retractor is (ALR) automatic locking covered by a 4" hard plastic protective boot that measures 4" wide x 2 1/2" tall x 3 3/4" wide.
  • The webbing when fully extended from the retractor measures 52" long. Can be re-adjusted until extended 16".
  • MH2-YZ mounting kit should be used when mounting flat to the side of a seat.
  • 200K mounting kit should be used when mounting the retractor upright to the floor to the side of a seat.
  • MH2-YZ or 200K mounting kit is not required when purchasing RB4 reinforcing plates. Order 1 MH11 bolt and MH12 lock washer per plate.
  • Specialty brackets and extensions are listed at end of the section to adjust the mounting position or location.
  • Lengths listed are approximate
  • W8433-1 and W8434-1 replacement buckles should be used with W8433 or W8434 series seat belts only.

    .....Closed Circuit Description: W8434 Series
    To function as designed wiring to an alarm buzzer or illuminated light circuit is required.
  • When the latch is not connected in to the buckle the alarm buzzer will sound or the indicator light will illuminate.
  • When the latch is connected in to the buckle the micro safety switch turns off allowing the current to flow turning off the alarm buzzer or indicator light.
  • After starting, the removal of the latch from the buckle will not shut off the engine. The alarm buzzer will sound or indicator light will illuminate.
    Example Of Use
  • Seat belt use is not required however the sounding of an alarm buzzer indicating the seat belt is not being used is required.
  • Seat belt use is not required however the illumination of a light indicating the seat belt is not being used is required.
  • Seat belt use is required however the disabling of the engine if the seat belt is not being used is not required only notification by an alarm buzzer or by illumiated light is required.

    .....Open Circuit Description W8433 Series
    To function as designed wiring to the power source, hot wire between the ignition switch and coil circuit is required.
  • In order to start the engine the latch must be connected in to the buckle which turns off the micro safety switch allowing the current to flow.
  • If the engine is running and the latch is removed from the buckle the micro safety switch will turn on stopping the flow of current causing the engine to shut off.
    Example Of Use
  • Seat belt usage is required in order to start the fork lift.
  • Seat belt usage is required and in order to operate the fork lift they must be used.
  • Seat belt usage is required and if not being used the engine will not start or if running will shut off.

    Description                                                                       Item Number
    Retractable Lap Set With Open Circuit Micro Switch. Black Webbing                    W8433B
    Retractable Lap Set With Open Circuit Micro Switch. Safety Orange Webbing            W8433J
    Buckle Side Only. Open Circuit. For Use With W8433 Series Only                       W8433-1
    
    Retractable Lap Set With Closed Circuit Micro Switch. Black Webbing W8434B Retractable Lap Set With Closed Circuit Micro Switch. Safety Orange Webbing W8434J Buckle Side Only. Closed Circuit. For Use With W8434 Series Only W8434-1
    Body Reinforcement Plate. Each RB4 Mounting Kit. Seat Side. Per Belt MH2-YZ Mounting Kit. To Floor. Per Belt 200K Bolt Use with RB4 Plate MH11 Lock Washer. Use With RB4 plate MH12

    To Order:
  • Call:(302) 629-8508 8-5 EST Monday-Friday
  • Or use the secure on-line order form below.
  • With End Release Cable Buckle With Closed Or Open Switch Price
    W8433 Series: With Open Circuit Safety Switch. $45.00ea
    W8433-1 Buckle Side Only: Open Circuit Safety Switch. For Use With W8433 Series Only. $24.50ea
    W8434 Series: With Closed Circuit Safety Switch. $45.00ea
    W8434-1 Buckle Side Only: Closed Safety Switch. For Use With W8434 Series Only. $24.50ea
    MH2-YZ Mounting Kit. For Use When Attaching To Side Of Seat. Per Belt. $3.25ea
    200K Mounting Kit. For Use When Mounting Retractor Upright To Floor. Per Belt. $4.25ea
    RB4: Reinforcing Plate. Order One MH11 Bolt And MH12 Lock Washer Per Plate. $7.50ea
    MH11 Bolt: Use With RB4 Reinforcing Plate. Per Plate. $1.30ea
    MH12 Lock Washer: Use With RB4 Reinforcing Plate. Per Plate. $.35ea


    Click on picture to enlarge
    Specialty Mounting Brackets And Extensions Price
    RB6: 1 1/2" L-Bracket $2.50ea
    RB2: 2" L-Bracket $2.50ea
    RB7: 3" Flat Extension $3.50ea
    RB11: 6" Flat Extention $7.50ea
    RB9: 5" Bracket With Double Angle $8.50ea
    RB8-L: 7" Bracket With Left Angle $6.50ea
    RB8-R: 7" Bracket With Right Angle $6.50ea
    RB10: 12" Bracket With Single Angle $9.50ea


    Liability Disclaimer: The Andover Companies, and its subsidiaries assumes no responsibility for any damage due to the installation, either proper or improper, or for any damage or bodily injury arising from the use of any product. It is understood that the purchaser, installer and/or end user is responsible for the determination that the product purchased is suitable for its intended use and agrees to indemnify and hold The Andover Companies,Inc and its subsidiaries, harmless for any claim, action or demand arising from the installation and/or use of any product. There are no guarantees or warrantees on any product, implied or expressed, of fitness for a particular use with any such warrantees being specifically and expressly disclaimed. In the event any of the above limitations are held not enforceable our liability shall not exceed an amount equal to the amount paid to us for the product. Receipt of product or products confirm acceptance of disclaimer and liability transfer to purchaser, installer and/or end user.

    All information detailed within this document is based on information believed to be accurate but accuracy is not guaranteed. All pictures, diagrams and item descriptions are protected property of The Andover Companies,Inc and are not to be duplicated in any manner without written permission.

    Return To Seat Belt Main Index Page



    (forklift 5-25-15 )