
Since 1985, Andover Restraints, the seat belt division of The Andover Companies Inc has been one of the leading retail and wholesale suppliers of forklift seat belts end release cable buckle or bracket side seat belts with an open or closed micro safety switches for most Caterpillar, Hyster, Mitsubishi, Nissan, Sellick, Toyota and Yale order pickers, pallet jacks, reach trucks and sideloader style fork lifts. Click Here for forklift seat belts with out a micro safety switch. All of the forklift seat belts that we supply have been assembled or manufactured in the USA.
All of the retractors are (ALR) automatic locking that lock when released at the required position and must be released back to the retractor to re-adjust the extended length. The retractors are covered with a hard plastic boot to protect the inner components from damage, dirt and dust.
If a factory seat belt mounting reinforcing plate is damaged or missing a RB4 flat threaded reinforcing plate with corner rivet holes can be used to add support to the mounting locations. When purchasing a RB4 reinforcing plate seat belt mounting kits are not required. Order one MH1 bolt per RB4 reinforcing plate.
The Difference Between A Closed And Open Circuit Misco safety Switch;
A closed circuit,when wired, requires that the latch(male side) be inserted in to the buckle to complete the circuit in order to be able to start the forklift.
A open circuit,when wired, does not require the latch(male side) be inserted in to the buckle in order to start the forklift. If wired to a buzzer or to an alarm they will sound until the latch(male side) is inserted in to the buckle or if wired to a dash lamp the lamp will stay illuminated until the latch(male side) is inserted in to the buckle.
To request information on our wholesale program with pricing, please fax your request on company letterhead to (410) 381-6700.
With Twisted Cable And Open Or Closed Circuit Micro Safety Switch
To Order:
Call:(302) 629-8508 8-5 EST Monday-Friday
Or use the secure on-line order form located at the end of section.
Specifications:
Available with a closed or open circuit micro safety switch.
Click Here for forklift seat belts without a micro safety switch.
The buckle side is 9" long with a covered twisted steel cable with a 1/2" mounting hole at the end.
Has a 5 amp rating with a weather protected plug in fitting.
The retractor is a (ALR) automatic locking type covered with a hard plastic protective boot.
The webbing when fully extended from the retractor measures 52"long.
Available with black and safety orange webbing.
Except for the red press, all of the plastic pieces are black regardless of the webbing color.
L-brackets and extensions are listed to adjust the mounting position or location.
Description Item Number
Retractable Lap With Closed Circuit Micro Switch. Black Webbing W8433B
Retractable Lap With Closed Circuit Micro Switch. Orange Webbing W8433J
Retractable Lap With Open Circuit Micro Switch. Black Webbing W8434B
Retractable Lap With Open Circuit Micro Switch. Orange Webbing W8434J
Body Reinforcement Plate RB4
Mounting Kit MH2
Bolt If RB4 Is Purchased MH1
With Closed Circuit Micro Safety Switch And 4" Or 7" Long Retractor Boot

Specifications:
Available with a closed circuit micro safety switch.
Click Here for forklift seat belts without a micro safety switch.
The retractor is (ALR) automatic locking covered with a hard plastic protective boot.
The webbing when fully extended from the retractor measures 52"long.
Available with black, bright red, grey and safety orange webbing.
Except for the red press all of the plastic pieces are black regardless of the webbing color.
L-brackets and extensions are listed to adjust the mounting position or location.
Buckle Side Available Lengths;
5" Long. Actual length end to end is 5.25.
7" Long. Actual length end to end is 7.25.
9" Long. Actual length end to end is 9.75.
13" Long. Actual length end to end is 13.25.
Column Description Item Number Series
With 4" Long Retractor Protective Boot
A With 5" Bracket Side With Closed Circuit Micro Safety Switch. W8258-5E
B With 7" Cable Side With Closed Circuit Micro Safety Switch. W8258-7E
C With 9" Cable Side With Closed Circuit Micro Safety Switch. W8258-9E
With 13" Cable Side With Closed Circuit Micro Safety Switch. W8258-12E
With 7" Long Retractor Protective Boot
D With 5" Bracket Side And Closed Circuit Micro Safety Switch. W8233-5E
E With 7" Cable Side And Closed Circuit Micro Safety Switch. W8233-7E
F With 9" Cable Side And Closed Circuit Micro Safety Switch. W8233-9E
With 13" Cable Side And Closed Circuit Micro Safety Switch. W8233-12E
Click to View Webbing Colors or to order webbing samples.
Color A B C D E F
Black W8258B-5E W8258B-7E W8258B-9E W8233B-5E W8233B-7E W8233B-9E
Bright Red W8258N-5E W8258N-7E W8258N-9E W8233N-5E W8233N-7E W8233N-9E
Grey W8258K-5E W8258K-7E W8258K-9E W8233K-5E W8233K-7E W8233K-9E
Safety Orange W8258J-5E W8258X-7E W8258X-9E W8233X-5E W8233X-7E W8233X-9E
Mounting Kit MH2 MH2 MH2 MH2 MH2 MH2
Body Reinforcement Plate RB4 RB4 RB4 RB4 RB4 RB4
Bolt If RB4 Is Purchased MH1 MH1 MH1 MH1 MH1 MH1
Mounting Brackets
Description Item Number
1 1/2" L-Bracket RB6
2" L-Bracket RB2
5" Bracket With Double Angle RB9
7" Bracket With Single Angle,Right Side RB8-R
7" Bracket With Single Angle,Left Side RB8-L
3" Flat Extension Bracket RB7
6" Flat Extension Bracket RB11
12" Bracket With Single Angle RB10
| With Twisted Cable And Open Or Closed Circuit Micro Safety Switch |
Price |
Color |
Order |
|
|
| With 4" Or 7" Retractor Boot And Closed Circuit Micro Safety Switch |
Price |
Color |
Order |
|
|
| Mounting Brackets |
Price |
Order |
|
|
Liability Disclaimer: The Andover Companies, and its subsidiaries assumes no responsibility for any damage due to the installation, either proper or improper, or for any damage or bodily injury arising from the use of any product. It is understood that the purchaser, installer and/or end user is responsible for the determination that the product purchased is suitable for its intended use and agrees to indemnify and hold The Andover Companies,Inc and its subsidiaries, harmless for any claim, action or demand arising from the installation and/or use of any product. There are no guarantees or warrantees on any product, implied or expressed, of fitness for a particular use with any such warrantees being specifically and expressly disclaimed. In the event any of the above limitations are held not enforceable our liability shall not exceed an amount equal to the amount paid to us for the product. Receipt of product or products confirm acceptance of disclaimer and liability transfer to purchaser, installer and/or end user.
All information detailed within this document is based on information believed to be accurate but accuracy is not guaranteed. All pictures, diagrams and item descriptions are protected property of The Andover Companies,Inc and are not to be duplicated in any manner without written permission.
Return To Seat Belt Main Index Page
(forklift-1 8-12-11 )
|