On Sale Contact Us:EMail Call Us:(302) 629-8508
Return To Seat Belt Main Index Page Webbing Return To Components And Hardware Index

Seat belt anchor end fittings available as fixed flat with a chrome or yellow zinc finish that bolt directly to the floor, angled with a chrome or yellow zinc finish that bolt directly to the floor plus snap hook anchor end fittings that attach to a floor mounted eyebolt. Also listed are covers that snap on to a mounting bolt head covering the entire anchor end fitting or cover the bolt head only.




Fixed: Chrome

Quantity:

Add CVR100B Black End Fitting Cover $10.00ea
Add CVR100T Tan End Fitting Cover $10.00ea
Add CVR-BH Bolt Cover $1.00ea
Add MH7 Mounting Bolt $1.30ea
Add MH11 Mounting Bolt $1.25ea
Add MH12 Lock Washer. Per Bolt. $.35ea

Product Notes: Click on picture to enlarge.
  • End fittings are for use with standard 1 15/16th (2") width webbing.
  • EF7C: 1 15/16" long with 1/2" bolt hole. Flat.
  • EF10C: 1 13/16" long with 1/2" bolt hole. 35 degree..
  • CVR-BH bolt cover snaps on to bolt head covering bolt.
  • CVR100 cover snaps on to bolt head covering the entire end fitting.
  • MH7 Bolt: 7/16-20 x 1" zinc chromate hex head.
  • MH11 Bolt: 7/16-20 x 1 1/2" zinc chromate hex head.
  • Measurements are approximate.
    For product questions or ordering assistance call (302)629-8508.




  • Fixed: Zinc (Yellow And Chromate)

    Quantity:

    Add CVR100B Black End Fitting Cover $10.00ea
    Add CVR100T Tan End Fitting Cover $10.00ea
    Add CVR-BH Bolt Cover $1.00ea
    Add MH7 Mounting Bolt $1.30ea
    Add MH11 Mounting Bolt $1.25ea
    Add MH12 Lock Washer. Per Bolt. $.35ea

    Product Notes: Click on picture to enlarge
  • For use with standard 1 15/16th (1 7/8th) width webbing.
  • EF5: 2 1/8" long. 9/16" mounting bolt hole. 30 degree. Zinc chromate
  • EF6: 2 1/8" long. 9/16" mounting bolt hole. Flat. Zinc chromate.
  • EF7: 1 7/8" long. 1/2" mounting bolt hole. Flat. Yellow zinc.
  • EF10: 1 7/8" long. 1/2" mounting bolt hole. 35 degree. Yellow zinc.
  • EF11: 1 7/8" long. 9/16" mounting bolt hole. 90 degree. Zinc chromate.
  • CVR-BH bolt cover snaps on to bolt head covering bolt.
  • CVR100 cover snaps on to bolt head covering the entire end fitting. Will not fit EF11
  • MH7 Bolt: 7/16-20 x 1" zinc chromate hex head.
  • MH11 Bolt: 7/16-20 x 1 1/2" zinc chromate hex head.
  • Measurements are approximate.
    For product questions or ordering assistance call (302)629-8508.

  • Snap Hook

    Quantity:

    Add MH1-13 Mounting Eyebolt Bolt. $3.25ea
    Add MH1-14 Mounting Eyebolt Bolt. $3.75ea
    Add MH12 Lock Washer. Per Eyebolt. $.35ea

    Product Notes: Click on picture to enlarge
  • Snaps on to a floor mounted eyebolt.
  • For use with standard 1 15/16th (1 7/8th) width webbing.
  • EF13C: 2 1/2" long. 3/4" spring loaded eyebolt opening. Chrome.
  • EF8C: 2 3/4" long. 1/2" spring loaded eyebolt opening. Polished chrome.
  • MH1-13 Eyebolt: 7/16-20 x 2 1/2". 5/8" eye. 1 1/4" threaded area. 1 /4" thick. Yellow zinc.
  • MH1-14 Eyebolt: 7/16-20 x 3". 5/8" eye. 1 3/4" threaded area. 1/4" thick. Yellow zinc.
  • Measurements are approximate.
    For product questions or ordering assistance call (302)629-8508.



  • Specialty, Adjustable

    Quantity:

    Add CVR-BH Bolt Cover $1.00ea
    Add MH7 Mounting Bolt $1.30ea
    Add MH11 Mounting Bolt $1.25ea
    Add MH12 Lock washer. Per Bolt. $.35ea

    Product Notes:
  • For use with standard 1 15/16th (1 7/8th) width webbing.
  • EF9: 2 piece. 2 1/4" long. 2 3/8" wide. 35 degree. Yellow zinc.
  • Allows webbing length adjustability at mounting points.
  • Measurements are approximate.
    For product questions or ordering assistance call (302)629-8508.

  • On Sale Contact Us:EMail Call Us:(302) 629-8508
    Return To Seat Belt Main Index Page Webbing Return To Components And Hardware Index

    Liability Disclaimer: The Andover Companies, and its subsidiaries assumes no responsibility for any damage due to the installation, either proper or improper, or for any damage or bodily injury arising from the use of any product. It is understood that the purchaser, installer and/or end user is responsible for the determination that the product purchased is suitable for its intended use and agrees to indemnify and hold The Andover Companies,Inc and its subsidiaries, harmless for any claim, action or demand arising from the installation and/or use of any product. There are no guarantees or warrantees on any product, implied or expressed, of fitness for a particular use with any such warrantees being specifically and expressly disclaimed. In the event any of the above limitations are held not enforceable our liability shall not exceed an amount equal to the amount paid to us for the product. Receipt of product or products confirm acceptance of disclaimer and liability transfer to purchaser, installer and/or end user.

    All information detailed within this document is based on information believed to be accurate but accuracy is not guaranteed. All pictures, diagrams and item descriptions are protected property of The Andover Companies,Inc and are not to be duplicated in any manner without written permission.

    (ends 2-7-17)