On Sale Contact Us:EMail Call Us:(302)629-8508
Seat Belt Index Page Build Your Own Individual Components,Hardware And Webbing
Retrofit combination rear seat retractable lap seat belt with shoulder harness kits. The seatbelt retractors utilized are compact ELR web sensitive emergency locking type that allow for movement once buckled and lock on sudden webbing movement that have been designed to be mounted flat on to a deck panel, raised wheel well or to the back side of the rear seat in order to add a retractable lap seat belt with shoulder harness where not previously installed.

The retrofit kits include the retractable lap seat belt with attached shoulder harness plus required mounting hardware for two positions/persons plus installation instructions. To attach the right and left lower portion of the retrofit kit previously installed threaded underbody reinforcing plates are used. If the vehicle did not have rear lap seat belts previously installed or the threaded underbody reinforcing plates are damaged or missing order 2 RB1-1 underbody reinforcing plates with weldnut to add underbody support for the two lower mounting points.

All of the seat belts are manufactured or assembled in the USA with USA certification tag confirming compliance with current FMVSS (Federal Motor Vehicle Safety Standards) 209 and 302.



The retractor cover that is included covers the center webbing spool only and not the top and sides of the retractor. When covering the top and the sides of the retractor for a finished look is required order 2 CVR200 paintable retractor covers. When mounting the retractor in the trunk with the webbing coming thru the deck lid order 2 BZ-1B black or BZ-1T tan paintable bezels for a finished look.

To Order:
  • Call:(302) 629-8508 8-5 EST Monday-Friday
  • Or use the secure on-line order form below.
  • With Vintage Lift Buckle




    Retrofit Kit

    Quantity

    Add 2-RB1-1 Underbody Reinforcing Plates With Weld Nuts 2/$25.00
    Add 2-CVR200 Full Retractor Cover 2/$20.00
    Add 2-BZ-1B Black Bezels 2/$20.00
    Add 2-BZ-1T Tan Bezels 2/$20.00
    Add 2-ADJ3B Black Latch Stop Buttons 2/$5.00


    Product Notes: Click On Picture To Enlarge
    Additional Available Webbing Colors. Contact us to order.
  • The lift lid of the buckle is bright chrome.
  • Includes retractable lap with harness,instructions and mounting hardware for two positions/persons.
  • A latch stop button keeps the latch from sliding down the webbing when the seat belt is not in use.
    For product questions or ordering assistance call (302)629-8508.



  • Matching Center Non Retractable Lap Seat Belt

    Quantity

    Product Notes: Click On Picture To Enlarge
    Additional Available Webbing Colors.Contact us for availability.
  • The lift lid of the buckle is bright chrome.
  • Length 60": Adjustable buckle side 36". Fixed side 24".
  • Length 74": Adjustable buckle side 40". Fixed side 34".
  • Lengths are approximate.
  • Additional mounting hardware is not required when purchasing a deck lid kit.
    For product questions or ordering assistance call (302)629-8508.


  • With Metal Push Button Buckle With "Starburst"




    Retrofit Kit

    Quantity

    Add 2-RB1-1 Underbody Reinforcing Plates With Weld Nuts 2/$25.00
    Add 2-CVR200 Full Retractor Cover 2/$20.00
    Add 2-BZ-1B Black Bezels 2/$20.00
    Add 2-BZ-1T Tan Bezels 2/$20.00
    Add 2-ADJ3B Black Latch Stop Buttons 2/$5.00


    Product Notes: Click On Picture To Enlarge
    Additional Available Webbing Colors. Contact us for availability.
  • Includes retractable lap with harness, instructions and mounting hardware for two positions/persons.
  • A latch stop button keeps the latch from sliding down the webbing when the seat belt is not in use.
    For product questions or ordering assistance call (302)629-8508.



  • Matching Center Non Retractable Lap Seat Belt

    Quantity

    Product Notes: Click On Picture To Enlarge
    Additional Available Webbing Colors. Contact us for availability.
  • Length 60": Adjustable buckle side 36". Fixed side 24".
  • Length 74": Adjustable buckle side 40". Fixed side 34".
  • Lengths are approximate.
  • Additional mounting hardware is not required when purchasing a deck kit.
    For product questions or ordering assistance call (302)629-8508.


  • With Metal Push Button Buckle With "GM"




    Retrofit Kit

    Quantity

    Add 2-RB1-1 Underbody Reinforcing Plates With Weld Nuts 2/$25.00
    Add 2-CVR200 Full Retractor Cover 2/$20.00
    Add 2-BZ-1B Black Bezels 2/$20.00
    Add 2-BZ-1T Tan Bezels 2/$20.00
    Add 2-ADJ3B Black Latch Stop Buttons 2/$5.00


    Product Notes: Click On Picture To Enlarge
    Additional Available Webbing Colors.Contact us for availability.
  • Includes retractable lap with harness, instructions and mounting hardware for two positions/persons.
  • A latch stop button keeps the latch from sliding down the webbing when the seat belt is not in use.
    For product questions or ordering assistance call (302)629-8508.



  • Matching Center Non Retractable Lap Seat Belt

    Quantity

    Product Notes: Click On Picture To Enlarge
    Additonal Available Webbing Colors.Contact us for availability.
  • Length 60": Adjustable buckle side 36". Fixed side 24".
  • Length 74": Adjustable buckle side 40". Fixed side 34".
  • Lengths are approximate.
  • Additional mounting hardware is not required when purchasing a deck kit.
    For product questions or ordering assistance call (302)629-8508.

  • On Sale Contact Us:EMail Call Us:(302)629-8508
    Seat Belt Index Page Build Your Own Individual Components,Hardware And Webbing

    Liability Disclaimer:The Andover Companies, and its subsidiaries assumes no responsibility for any damage due to the installation, either proper or improper, or for any damage or bodily injury arising from the use of any product. It is understood that the purchaser, installer and/or end user is responsible for the determination that the product purchased is suitable for its intended use and agrees to indemnify and hold The Andover Companies,Inc and its subsidiaries, harmless for any claim, action or demand arising from the installation and/or use of any product. There are no guarantees or warrantees on any product, implied or expressed, of fitness for a particular use with any such warrantees being specifically and expressly disclaimed. In the event any of the above limitations are held not enforceable our liability shall not exceed an amount equal to the amount paid to us for the product. Receipt of product or products confirm acceptance of disclaimer and liability transfer to purchaser, installer and/or end user.

    All information detailed within this document is based on information believed to be accurate but accuracy is not guaranteed.All pictures,diagrams and item descriptions are protected property of The Andover Companies,Inc and are not to be duplicated in any manner without written permission.


    (deck 2-28-17)