Specialty child restraint seat belt manufacture certified to meet or exceed all current FMVSS209 and FMVSS302 seat belt safety regulations that are manufactured or assembled in the USA. Some of the applications for this specialty seat belt include the securing of a booster seat or to secure a child on a school bus or shuttle van that is not equipped with factory installed seat belts.
In order to utilize this child restraint on a school bus or shuttle van both of the buckle sides need to be pre-mounted to each side of the seat or on to the floor on the side of the seat. To use, a parent, driver or the user would insert each end of the removable lap belt portion in to the pre-mounted buckle sides and then adjust to fit. In the event the seat belts would need to be removed during an emergency, both of the buckle sides have a top release push button which are easier to access and to release than standard side release push button buckles.
When installing a seat belt where it was not previously installed or factory underbody reinforcements are damaged or missing it is suggested that RB1 underbody reinforcement plates with attached weld nuts be used to add support to all of the mounting points.
Each of the buckle sides measure approximately 10 1/2" long.
The removable lap seat belt portion adjusts to 51" long with adjustability on both ends.
All of the plastic pieces are black regardless of the webbing color.
One MH2-YZ mounting kit is required per seat belt if not purchasing underbody reinforcicing plates.
Sold not returnable. Contact us for pricing and the availability of webbing colors not listed.
Call: (302) 629-8508 8-5 EST Monday-Friday
Or use the secure on-line order form below.
Color Item Number
Mounting Kit MH2-YZ
Underbody Reinforcing Plate.Per Belt RB1
Child Specialty Restraint
Liability Disclaimer: The Andover Companies, and its subsidiaries assumes no responsibility for any damage due to the installation, either proper or improper, or for any damage or bodily injury arising from the use of any product. It is understood that the purchaser, installer and/or end user is responsible for the determination that the product purchased is suitable for its intended use and agrees to indemnify and hold The Andover Companies,Inc and its subsidiaries, harmless for any claim, action or demand arising from the installation and/or use of any product. There are no guarantees or warrantees on any product, implied or expressed, of fitness for a particular use with any such warrantees being specifically and expressly disclaimed. In the event any of the above limitations are held not enforceable our liability shall not exceed an amount equal to the amount paid to us for the product. Receipt of product or products confirm acceptance of disclaimer and liability transfer to purchaser, installer and/or end user.
All information detailed within this document is based on information believed to be accurate but accuracy is not guaranteed. All pictures, diagrams and item descriptions are protected property of The Andover Companies,Inc and are not to be duplicated in any manner without written permission.