On Sale Matching Retractable Belts Contact Us:EMail
Back To Non Retractable Buckle Choices Back To Retractable Buckle Choices
Push button buckle seat belts with red or black press area background available as a non retractable lap seat belt, non retractable lap seat belt with shoulder harness, non retractable Y harness, non retractable 3 point, non retractable 4 point, retractable lap seat belt, retractable lap seat belt with shoulder harness and dual retractor lap seat belt with shoulder harness with webbing colors to match most interiors for most makes and models of American and imported automobiles and trucks with "No Charge For Shipping" by ground within the CUSA, lower 48. All seat belts and related hardware are new and manufactured to meet or exceed FMVSS (U.S. Federal Motor Vehicle Safety Standards) 209 and 302 with all of the seat belts manufactured or assembled in the USA.

The seat belts are an aftermarket universal fit and are not implied to be vehicle or application specific. No guarantee is made as to fit or if a webbing color will match an existing seat belt or interior color. Click Here for vehicle specific seat belts, non automotive seat belts and seatbelts for specialty applications. You will be re-directed to the main index page of Andover Restraints, also a division of The Andover Companies. No charge shipping does not apply to purchases from the Andover Restraints site.

Non Retractable Lap Seat Belts


Lap Seat Belt

Quantity

Click Here To View Webbing Colors Or To Order Webbing Samples.

Upgrade To (108)Optional Buckle With Black Press Area Background $2.50ea
Add MH2-YZ Mounting Kit $3.25ea
Add 201K-Z Retrofit Mounting Kit $12.00ea
Add CR1 Plastic Clip On Webbing Retractor $9.50ea
Add 80296 Chrome "Roll-A-Belt" Clip On Webbing Retractor $20.00ea

Product Notes: Click On Picture To Enlarge
  • **After the color indicates the plastic pieces are color matched to the webbing color.
  • Unless indicated all of the plastic pieces are black.
  • Length 60": Adjustable side 40". Buckle side 20".
  • Length 74": Adjustable side 40". Buckle side 34".
  • Length 90": Adjustable side 45". Buckle side 45".
  • Lengths listed are approximate.
  • MH2-YZ mounting kit includes 7/16-20 bolts, washers, nuts and oversize reinforcing washers.
  • 201K-Z retrofit kit should be used when seat belts were not previously installed.
  • Retrofit kits include underbody reinforcement plates and mounting hardware.
  • MH2-YZ mounting kit is not required when purchasing a retrofit kit.
  • Click Here To View Matching Retractable Seat Belts.

  • Lap Seat Belt With Sleeved Buckle Side

    Quantity

    Click Here To View Webbing Colors or To Order Webbing Samples.

    Upgrade To (108)Optional Buckle With Black Press Area Background $2.50ea
    Add MH2-YZ Mounting Kit $3.25ea
    Add 201K-Z Retrofit Mounting Kit $12.00ea
    Add CR1 Plastic Clip On Webbing Retractor $9.50ea
    Add 80296 Chrome "Roll-A-Belt" Clip On Webbing Retractor $20.00ea

    Product Notes: Click On Picture To Enlarge
  • **Indicates the plastic pieces are color matched to the webbing color.
  • Unless indicated all the plastic pieces are black.
  • Length 60": Adjustable side 48". Buckle side 12" long with sleeve.
  • Length 74": Adjustable side 62". Buckle side 12" long with sleeve.
  • Lengths listed are approximate.
  • MH2-YZ mounting kit includes 7.16-20 bolts, washers, nuts and oversize reinforcing washers.
  • 201K-Z retrofit kit should be used when seat belts were not previously installed.
  • Retrofit kits include underbody reinforcement plates and mounting hardware.
  • MH2-YZ mounting kit is not required when purchasing a retrofit kit.
  • Click Here To View Matching Retractable Seat Belts.
  • Non Retractable Lap Seat Belt With Shoulder Harness



    Lap Belt With Shoulder Harness

    Quantity

    Upgrade To (108)Optional Buckle With Black Press Area Background $2.50ea

    Add MH9 Mounting Kit $4.75ea
    Add 301K-Z Retrofit Mounting Kit $21.50ea

    Product Notes: Click On Picture To Enlarge
  • The extended length less the buckle side measures 95" long.
  • MH9 mounting kit includes 7/17-20 bolts, washers, nuts and oversize reinforcing washers.
  • 301K-Z retrofit kit shold be used when seat belts were not previously installed.
  • Retrofit kits include shoulder harness and underbody reinforcement plates and mounting hardware.
  • MH9 mounting kit is not required when purchasing a retrofit kit.
  • Lengths listed are approximate.
  • Click Here To View Matching Retractable Seat Belts.


  • Specialty Mounting Brackets

    Quantity:

    Add MH2-YZ Mounting Kit $3.25ea

    Product Notes: Click On Picture To Enlarge
  • RB6: 1 1/2" long L-bracket. Yellow zinc.
  • RB2: 2" long L-bracket. Yellow zinc.
  • RB9: 5" long double angle bracket. Yellow zinc.
  • RB8-L: 7" long left angle bracket. 65 degree bend.
  • RB8-R: 7" long right angle bracket. 65 degree bend.
  • RB7: 3" long flat extension. Yellow zinc.
  • RB11: 6" long flat extension. Yellow zinc.
  • RB10: 12" long single angle bracket. Yellow zinc.
  • Lengths listed are approximate.
  • Reinforcement Plates

    Quantity:
    Add MH11 Zinc Chromate Bolt $1.30ea
    Add MH12 Zinc Chromate Lock Washer $.35ea

    Product Notes: Click On Picture To Enlarge
  • RB1-1: Curved steel with attached weldnut. Measures 4 1/2" x 3".
  • RB1: Same as RB1-1 except pair.
  • RB3: Steel with attached weldnut. Measures 4 1/2"(not including tip) x 1 1/2".
  • RB4: Measures 3" x 1 1/2". Accepts a 7/16th fine thread bolt.
  • Lengths listed are approximate.
  • Retractors, Clip On Webbing

    Quantity:

    Product Notes: Click On Picture To Enlarge
  • CR1 black plastic retractor measures 3" x 2 1/2".
  • 80296 chrome "Roll-A-Belt". Barrell measures 2 1/2".
  • Lengths listed are approximate.

  • Liability Disclaimer: The Andover Companies, and its subsidiaries assumes no responsibility for any damage due to the installation, either proper or improper, or for any damage or bodily injury arising from the use of any product. It is understood that the purchaser, installer and/or end user is responsible for the determination that the product purchased is suitable for its intended use and agrees to indemnify and hold The Andover Companies,Inc and its subsidiaries, harmless for any claim, action or demand arising from the installation and/or use of any product. There are no guarantees or warrantees on any product, implied or expressed, of fitness for a particular use with any such warrantees being specifically and expressly disclaimed. In the event any of the above limitations are held not enforceable our liability shall not exceed an amount equal to the amount paid to us for the product. Receipt of product or products confirm acceptance of disclaimer and liability transfer to purchaser, installer and/or end user.

    All information detailed within this document is based on information believed to be accurate but accuracy is not guaranteed. All pictures, diagrams and item descriptions are protected property of The Andover Companies,Inc and are not to be duplicated in any manner without written permission.

    (SBL9 5-22-15)