Index Contact Us Related Items Custom Made
Back To Non-Retractable Buckle Choices Back To Retractable Buckle Choices
Dual retractor retractable push button buckle seat belts with shoulder harness and webbing colors to match most interiors for most makes and models of American and imported automobiles and trucks with "No Charge For Shipping" by ground within the CUSA, lower 48. All seat belts and related hardware are new and manufactured to meet or exceed FMVSS (U.S. Federal Motor Vehicle Safety Standards) 209,302 and SAE 386 with most manufactured or assembled in the USA.

All the seat belts are an aftermarket universal fit and are not implied to be vehicle or application specific. No guarantee is made as to fit or if a webbing color will match an existing seat belt or interior color. Click Here for a vehicle specific seat belt, seat belts for non-automotive and seatbelts for specialty applications. You will be re-directed to the main index page of Andover Restraints, also a division of The Andover Companies. No charge shipping does not apply to purchases from the Andover Restraints site.


Lap And Shoulder Harness With Dual Retractors

Quantity


Webbing Color Chart

Upgrade Buckle To Black Blackground With White Press $2.50ea
Add Mounting Kit $5.00ea
Add L-Bracket $2.50ea
Add Mounting Kit For The L-Bracket $1.25ea

Product Notes:
  • All of the plastic pieces are black regardless of webbing color.
  • The webbing fully extended from the lap retractor measures 55".
  • The webbing fully extended from the harness retractor measures 65".
  • The lap seat belt retractor is an (ALR) automatic locking type.
  • The shoulder harness retractor is an (ELR) emergengency locking type.
  • Lengths listed are approximate.
  • The invoice may show different product numbers.

     


    		•

    Matching Lap Seat Belt

    Quantity

    Webbing Color Chart

    Upgrade Buckle To Black Background With White Press $2.50ea
    Add Mounting Kit $2.50ea
    Add Plastic Clip On Retractor $9.50ea
    Add Chrome "Roll-A-Belt" Clip-On Retractor $20.00ea

    Product Notes:
  • **Indicates the plastic pieces are color matched to the webbing color.
  • Unless indicated as above all the plastic pieces are black.
  • Length 60": Adjustable side 40".Buckle side 20".
  • Length 74": Adjustable side 50".Buckle side 24".
  • Length 90": Adjustable side 45".Buckle side 45".
  • Lengths listed are approximate.
  • The invoice may show different product numbers.

     

    • Mounting Brackets

    Quantity:
    Mounting Kit If Belt Mounting Kit Was Purchased. $1.25ea
    Mounting Kit If Belt Mounting Kit Was Not Purchased. $2.50ea

    Product Notes:
  • RB6: 1 1/2" long L-bracket.Yellow zinc.
  • RB2: 2" long L-bracket.Yellow zinc.
  • RB9: 5" long double angle bracket.Yellow zinc.
  • RB8: 7" long single angle bracket.Yellow zinc.
  • RB7: 3" long flat extension.Yellow zinc.
  • RB11: 6" long flat extension.Yellow zinc.
  • RB10: 12" long single angle bracket.Yellow zinc.

    • Reinforcement Plates

    Quantity:
    Add Mounting Bolt $1.00ea

    Product Notes:
  • RB1-1: Curved steel with attached nut.Measures 4 1/2" x 3".
  • RB1:Same as RB1-1 except pair.
  • RB3: Steel with attached nut.Measures 4 1/2"(not including tip) x 1 1/2".
  • RB4: Measures 3" x 1 1/2" and accepts a 7/16th fine thread bolt.

    • Liability Disclaimer: The Andover Companies, and its subsidiaries assumes no responsibility for any damage due to the installation, either proper or improper, or for any damage or bodily injury arising from the use of any product. It is understood that the purchaser, installer and/or end user is responsible for the determination that the product purchased is suitable for its intended use and agrees to indemnify and hold The Andover Companies,Inc and its subsidiaries, harmless for any claim, action or demand arising from the installation and/or use of any product. There are no guarantees or warrantees on any product, implied or expressed, of fitness for a particular use with any such warrantees being specifically and expressly disclaimed. In the event any of the above limitations are held not enforceable our liability shall not exceed an amount equal to the amount paid to us for the product. Receipt of product or products confirm acceptance of disclaimer and liability transfer to purchaser, installer and/or end user.

    All information detailed within this document is based on information believed to be accurate but accuracy is not guaranteed. All pictures, diagrams and item descriptions are protected property of The Andover Companies,Inc and are not to be duplicated in any manner without written permission.

    (SBL9-2 6-22-11)