Andover Restraints Main Page On Sale Contact Us
More Non Retractable Buckle Choices More Retractable Buckle Choices Components And Hardware
OEM style all metal push button buckle seat belts with a starburst design on the press area seat belts that are available as a non retractable lap seat belt, non retractable lap seat belt with shoulder harness, retractable lap seat belt, retractable lap seat belt with shoulder harness with webbing colors to match most interiors of most makes and models of American and imported automobiles and trucks with "No Charge For Shipping" by ground within the CUSA, lower 48. All seat belts and related hardware are new and manufactured to meet or exceed FMVSS (U.S. Federal Motor Vehicle Safety Standards) 209 and 302 with all of the seat belts manufactured or assembled in the USA.

All the seat belts are an aftermarket universal fit and are not implied to be vehicle or application specific. No guarantee is made as to fit or if a webbing or component color will match an existing seat belt or interior color.

Click Here for a vehicle specific seat belt, non automotive seat belts and seatbelts for specialty applications. You will be re-directed to the main index page of Andover Restraints, also a division of The Andover Companies. No charge shipping does not apply to purchases from the Andover Restraints site.


Lap Seat Belt


Quantity

Click Here To View Webbing Colors Or To Order Webbing Samples
*After the color indicates all plastic pieces are color matched to the webbing color.

Add MH2-YZ Mounting Kit $3.25ea
Add 201K-Z Retrofit Mounting Kit $12.00ea
Add CR1 Plastic Clip-On Webbing Retractor $9.50ea
Add 80296 Chrome "Roll-A Belt" Clip-On Webbing Retractor $20.00ea

Product Notes: Click On Picture To Enlarge
  • Unless indicated all plastic pieces are black regardless of webbing color.
  • Length 60":Adjustable side 40". Buckle side 20".
  • Length 74":Adjustable side 40". Buckle side 34".
  • Length 90":Adjustable side 45". Buckle side 45".
  • MH2-YZ mounting kit includes 7/16-20 bolts, washers, nuts and oversize reinforcing washers.
  • A 201K retrofit kit should be used when seat belts were not previously installed.
  • Retrofit kit includes underbody reinforcement plates and mounting hardware.
  • MH2-YZ mounting kit is not required when purchasing a retrofit kit.
  • Lengths listed are approximate.
  • Click Here To View Matching Retractable Seat Belts

  • Lap Seat Belt With Shoulder Harness


    Quantity

    Add MH9 Mounting Kit $4.25ea
    Add 301K-Z Retrofit Mounting Kit $21.50ea
    Add CR1 Plastic Clip-On Webbing Retractor $9.50ea
    Add 80296 Chrome "Roll-A-Belt" Clip-On Webbing Retractor $20.00ea


    Product Notes:Click On Picture To Enlarge
  • Adjustable on the shoulder harness and lap seat belt positions.
  • The extended length without the buckle side measures 95" end to end.
  • MH9 mounting kit includes 7/16-20 bolts, washers, nuts and oversize reinforcing washers.
  • A 301K-Z retrofit kit should be used when seat belts were not previously installed.
  • Retrofit kit includes underbody reinforcement plates and mounting hardware.
  • MH9 mounting kit is not required when purchasing a retrofit kit.
  • Length listed is approximate.
  • Click Here To View Matching Retractable Seat Belts


  • Specialty Mounting Brackets

    Quantity:
    Add MH2-YZ Mounting Kit. $3.25ea

    Product Notes:Click On Picture To Enlarge
  • RB6: 1 1/2" long L-bracket. Yellow Zinc.
  • RB2: 2" long L-bracket. Yellow Zinc.
  • RB9: 5" long double angle bracket. Yellow Zinc.
  • RB8-L: 7" long left angle bracket. 65 degree bend. Yellow Zinc.
  • RB8-R: 7" long right angle bracket. 65 degree bend. Yellow Zinc.
  • RB7: 3" long flat extension. Yellow Zinc.
  • RB11: 6" long flat extension. Yellow Zinc.
  • RB10: 12" long angle bracket. Yellow Zinc.
  • Lengths listed are approximate.
  • Reinforcement Plates

    Quantity:
    Add MH11 Zinc Chrommate Mounting Bolt $1.30ea
    Add MH12 Zinc Chrommate Lock Washer $.35ea

    Product Notes:Click On Picture To Enlarge
  • RB1-1: Curved steel with attached weldnut. Measures 4 1/2" x 3".
  • RB1: Same as RB-1 except pair.
  • RB3: Steel with attached weldnut. Measures 4 1/2"(not including tip) x 1 1/2".
  • RB4: Threaded to accept a 7/16th fine thread bolt. Measures 3" x 1 1/2".
  • Lengths listed are approximate.
  • Retractors, Clip On Webbing

    Quantity:

    Product Notes:Click On Picture To Enlarge
  • CR1: Black plastic webbing retractor. Measures 3" x 2 1/2".
  • 80296: Chrome 1950-60's style "Roll-A-Belt".
  • Lengths listed are approximate.


  • Liability Disclaimer: The Andover Companies, and its subsidiaries assumes no responsibility for any damage due to the installation, either proper or improper, or for any damage or bodily injury arising from the use of any product. It is understood that the purchaser, installer and/or end user is responsible for the determination that the product purchased is suitable for its intended use and agrees to indemnify and hold The Andover Companies,Inc and its subsidiaries, harmless for any claim, action or demand arising from the installation and/or use of any product. There are no guarantees or warrantees on any product, implied or expressed, of fitness for a particular use with any such warrantees being specifically and expressly disclaimed. In the event any of the above limitations are held not enforceable our liability shall not exceed an amount equal to the amount paid to us for the product. Receipt of product or products confirm acceptance of disclaimer and liability transfer to purchaser, installer and/or end user.

    All information detailed within this document is based on information believed to be accurate but accuracy is not guaranteed. All pictures, diagrams and item descriptions are protected property of The Andover Companies,Inc and are not to be duplicated in any manner without written permission.

    (SBL7 5-25-15)