Contact Us Components And Hardware
Vintage Lift Buckle Retractable Belts More Non Retractable Buckle Choices More Retractable Buckle Choices

Vintage lift latch buckle 1950-60's style non retractable lap seat belts, non retractable lap seat belts with shoulder harness, custom Y-harness, 4-point, retractable lap seat belts, retractable lap seat belts with shoulder harness and dual retractor lap seat belt with shoulder harness with an all metal bright chrome lift lid buckle, dull satin lift lid buckle, black hammertone colored lift lid buckle and colored lift lid buckle with GM Bowtie insert with webbing colors to match most original and aftermarket interiors of most makes and models of American and imported automobiles and trucks with No Charge For Ground Shipping Within The CUSA, Lower 48.. The seat belts listed are an aftermarket universal fit and are not implied to be vehicle or application specific. No guarantee is made as to fit or if a webbing or component color will match an existing seat belt or interior color.

Click Here for vehicle specific, custom made seat belts, non automotive seat belts and seatbelts for specialty applications. You will be re-directed to the main index page of Andover Restraints, also a division of The Andover Companies. No charge shipping does not apply to purchases from the Andover Restraints website.

The seat belts and related hardware are new and manufactured to meet or exceed FMVSS (U.S. Federal Motor Vehicle Safety Standards) 209 and 302 with all of the seat belts manufactured or assembled in the USA.

Non Retractable Lap Seat Belts


Lap Belt With Fixed Anchor Ends

Quantity

Click Here To View Webbing Colors Or To Order Webbing Samples

Add MH2-YZ Mounting Kit. Yellow Zinc $3.25ea
Add MH4 Mounting Kit. Zinc Chromate $5.00ea
Add 201K-Z Retrofit Mounting Kit (Zinc Chromate Hardware) $12.00ea
Add CR1 Plastic Clip-On Webbing Retractor $9.50ea
Add 80296 Chrome "Roll-A-Belt" Clip-On Webbing Retractor $20.00ea

Product Notes: Click On Picture To Enlarge
  • Length 60": Adjustable buckle side 40". Fixed side 20".
  • Length 74": Adjustable buckle side 40". Fixed side 34".
  • Lengths listed are approximate.
  • MH2-YZ and MH4 mounting kit includes 7/16th bolts, washers, nuts and reinforcing washers.
  • Retrofit kits should be used when seat belts were not previously installed.
  • 201K-Z retrofit kit includes underbody reinforcement plates and zinc chromate hardware.
  • MH2-YZ or MH4 kits are not required when purchasing a retrofit kit.
  • Click Here To View Matching Retractable Belts


  • Lap Belt With "Snap Hook" Anchor Ends

    Quantity

    Click Here To View Webbing Colors Or To Order Webbing Samples

    Add MH3 Mounting Kit $7.50ea
    Add 205K Retrofit Mounting Kit $14.00ea
    Add CR1 Plastic Clip-On Retractor $9.50ea
    Add 80296 Chrome "Roll-A-Belt" Clip-On Retractor $20.00ea

    Product Notes: Click On Picture To Enlarge
  • Length 60": Adjustable buckle side 40". Fixed side 20".
  • Length 74": Adjustable buckle side 40". Fixed side 34".
  • Lengths listed are approximate.
  • Anchor ends are chrome "snap hooks" which attach to a floor mounted eyebolt.
  • MH3 mounting kit includes 7/16th eyebolts, washers, nuts and reinforcing washers.
  • A retrofit kit should be used when seat belts were not previously installed.
  • 205K retrofit kit includes underbody reinforcement plates and eyebolts.
  • MH3 mounting kit is not required when purchasing a retrofit kit.
  • Click Here To View Matching Retractable Seat Belts

  • Lap Belt With 2" Large "Snap Hook" Anchor Ends

    Quantity

    Add MH3 Mounting Kit $7.50ea
    Add 205K Retrofit Mounting Kit $14.00ea
    Add CR1 Plastic Clip-On Retractor $9.50ea
    Add 80296 Chrome "Roll-A-Belt" Clip-On Retractor $20.00ea

    Product Notes: Click On Picture To Enlarge
  • Length 60": Adjustable buckle side 40". Fixed side 20".
  • Length 74": Adjustable buckle side 40". Fixed side 34".
  • Lengths listed are approximate.
  • Anchor ends are bright chrome 2" snap hooks which attach to a floor mounted eyebolt.
  • MH3 mounting kit includes 7/16th eyebolts, washers, nuts and reinforcing washers.
  • A retrofit kit should be used when seat belts were not previously installed.
  • 205K retrofit kit includes underbody reinforcement plates and eyebolts.
  • MH3 mounting kit is not required when purchasing a retrofit kit.
  • Click Here To View Matching Retractable Seat Belts


  • Non Retractable Lap Belt With Shoulder Harness



    3-Point With Fixed Anchor Ends

    Quantity

    Click Here To View Webbing Colors Or To Order Webbing Samples

    Add MH9 Mounting Kit $4.75ea
    Add 301K-Z Retrofit Mounting Kit $21.50ea
    Add CR1 Plastic Clip-On Webbing Retractor $9.50ea
    Add 80296 Chrome "Roll-A-Belt" Clip-On Webbing Retractor $20.00ea

    Product Notes: Click On Picture To Enlarge
  • Length adjustment is on both the shoulder harness and lap belt.
  • Extended Length 115". 95" adjustable shoulder plus 20" adjustable buckle side.
  • Lengths listed are approximate.
  • MH9 mounting kit includes 7/16-20 bolts, washers, nuts and reinforcing washers.
  • A retrofit kit should be used when seat belts were not previously installed.
  • 301K-Z retrofit kit includes shoulder harness and underbody reinforcement plates and hardware.
  • MH9 mounting kit is not required when purchasing a retrofit kit.
  • Click Here To View Matching Retractable Seat Belts



  • 3-Point With Snap Hook Anchor Ends

    Quantity

    Click Here To View Webbing Colors Or To Order Webbing Samples

    Add MH10 Mounting Kit $9.25ea
    Add 304K Retrofit Mounting Kit $23.00ea
    Add CR1 Plastic Clip-On Webbing Retractor $9.50ea
    Add 80296 Chrome "Roll-A-Belt" Clip-On Webbing Retractor $20.00ea

    Product Notes: Click On Picture To Enlarge
  • Length adjustment is on both the shoulder harness and lap belt.
  • Extended Length 115". 95" adjustable shoulder plus 20" adjustable buckle side.
  • Lengths listed are approximate.
  • MH10 mounting kit includes eyebolts, washers, nuts and reinforcing washers.
  • A retrofit kit should be used when seat belts were not previously installed.
  • 304K retrofit kit includes shoulder harness and underbody reinforcement plates and hardware.
  • MH10 mounting kit is not required when purchasing a retrofit kit.
  • Click Here To View Matching Retractable Seat Belts

  • Custom 3-Point "Y" With Fixed Anchor Ends

    Quantity

    Add MH9 Fixed End Mounting Kit $4.75ea
    Add 305K Fixed End Retrofit Mounting Kit $17.00ea

    Product Notes: Click On Picture To Enlarge
  • Length adjustment is on both the shoulder harness and lap belt.
  • The harness strap measures 84" from attachment to lap belt.
  • Adjustable lap belt portion measures 74" long.
  • Lengths listed are approximate.
  • The standard fixed anchor ends are yellow zinc.
  • MH9 mounting kit includes 7/16 bolts, washers, nuts and reinforcing washers.
  • A retrofit kit should be used when seat belts were not previously installed.
  • 305K retrofit kit includes shoulder harness and underbody reinforcement plates and hardware.
  • MH9 mounting kit is not required when purchasing a retrofit kit.
  • Not SFI racing certified.
  • Click Here To View Matching Retractable Seat Belts


  • Specialty Mounting Brackets And Reinforcing Plates

    Mounting Brackets

    Quantity:

    Add MH2-Z Mounting Kit With Zinc Chromate Hardware. $3.50ea

    Product Notes: Click On Picture To Enlarge
  • RB6: 1 1/2" long L-bracket.Yellow zinc.
  • RB2: 2" long L-bracket.Yellow zinc.
  • RB9: 5" long double angle bracket.Yellow zinc.
  • RB8-L: 7" long left angle bracket. 65 degree bend. Yellow Zinc.
  • RB8-R: 7" long right angle bracket. 65 degree bend. Yellow Zinc.
  • RB7: 3" long flat extension.Yellow zinc.
  • RB11: 6" long flat extension.Yellow zinc.
  • RB10: 12" long single angle bracket.Yellow zinc.

  • Reinforcement Plates

    Quantity:
    Add MH11 Zinc Chromate Mounting Bolt $1.30ea
    Add MH12 Zinc Chromate Lock Washer $.35ea

    Product Notes: Click On Picture To Enlarge
  • RB1-1: Curved steel with attached weldnut. Measures 4 1/2" x 3".
  • RB1: Same as RB1-1 except pair.
  • RB3: Steel with attached nut. Measures 4 1/2"(not including tip) x 1 1/2".
  • RB4: Measures 3" x 1 1/2". Accepts a 7/16th fine thread bolt

  • Liability Disclaimer: The Andover Companies, and its subsidiaries assumes no responsibility for any damage due to the installation, either proper or improper, or for any damage or bodily injury arising from the use of any product. It is understood that the purchaser, installer and/or end user is responsible for the determination that the product purchased is suitable for its intended use and agrees to indemnify and hold The Andover Companies,Inc and its subsidiaries, harmless for any claim, action or demand arising from the installation and/or use of any product. There are no guarantees or warrantees on any product, implied or expressed, of fitness for a particular use with any such warrantees being specifically and expressly disclaimed. In the event any of the above limitations are held not enforceable our liability shall not exceed an amount equal to the amount paid to us for the product. Receipt of product or products confirm acceptance of disclaimer and liability transfer to purchaser, installer and/or end user.

    All information detailed within this document is based on information believed to be accurate but accuracy is not guaranteed. All pictures, diagrams and item descriptions are protected property of The Andover Companies,Inc and are not to be duplicated in any manner without written permission.

    (SBL5 9-1-15)