Home Contact Us Color Chart Return To Buckle Picture Page Related Items Custom Made
Cable Buckle Belts With Electrical Connectors Back To Non-Retractable Buckle Choices Back To Retractable Buckle Choices

Non-Retractable Lap Seat Belt

Quantity


Add Mounting Kit $2.50ea
Add Plastic Clip-On Retractor $9.50ea
Add Chrome Roll-A-Belt Clip-On Retractor $20.00ea

Product Notes:
  • Most installations will use a 12" cable buckle end.
  • All of the plastic pieces are black regardless of the webbing color.
  • The length adjustability is on the latch end side.
  • The cable buckle end has a covered twisted cable.
  • An L-bracket may be required to adjust the mounting position.
  • The lengths listed are approximate.
  • The invoice may show different product numbers.

    • Retractable Lap Belt With 4" Retractor Boot

    Quantity


    Add Mounting Kit With L-Bracket $4.75ea
    Add Additional L-Bracket For Buckle End $2.50ea
    Add Mounting Kit For Additional L-Bracket $1.25ea

    Product Notes:
  • Most installations will use a 12" long cable buckle end
  • All of the plastic pieces are black regardless of the webbing color.
  • The webbing when fully extended from the retractor measures 60" long.
  • The retractor is an (ALR) automatic locking type.
  • The retractor is measured end to end when laying flat.
  • The buckle end has a covered twisted cable.
  • An L-bracket may be required to mount the retractor upright.
  • The lengths listed are approximate.
  • The invoice may show different product numbers.

    • Retractable Lap Belt With 7" Retractor Boot

    Quantity


    Add Colored Retractor Boot $5.00ea
    Add Mounting Kit With L-Bracket $4.75ea
    Add Additional L-Bracket For Buckle End $2.50ea
    Add Mounting Kit For Additional L-Bracket $1.25ea

    Product Notes:
  • Most installations will use a 12" cable buckle end.
  • All the plastic pieces are black regardless of the webbing color unless a colored boot is ordered.
  • **Indicates that the retractor boot can be ordered color matched to the webbing. The buckle end side is black.
  • The retractor is an (ALR) automatic locking type.
  • The retractor boot is measured end to end when laying flat.
  • The webbing when fully extended from retractor measures 60" long.
  • The buckle end has a covered twisted cable.
  • An L-bracket may be required to mount the retractor upright.
  • The lengths listed are approximate.
  • The invoice may show different product numbers.

    • Retractable Lap Belt With Shoulder Harness

    Available Fully Extended Lengths:
  • 85" Long:5" Of Webbing Outside Of Retractor When Fully Retracted.
  • 110" Long:30" Of Webbing Outside Of Retractor When Fully Retracted.
  • 140" Long:60" Of Webbing Outside Of Retractor When Fully Retracted.

    Quantity


    Add Mounting Kit With L-Bracket And Shoulder Bolt $5.25ea
    Add Additional L-Bracket For Buckle End $2.50ea
    Add Mounting Kit For Additional L-Bracket $1.25ea

    Product Notes:
  • Most installations require a 140" long belt with a 12" cable buckle end
  • All plastic pieces are black regardless of webbing color.
  • The retractor is an (ELR) web sensitive emergency locking type.
  • The buckle end has a covered twisted cable.
  • An L-bracket may be required to mount the retractor upright.
  • The lengths listed are approximate.
  • The invoice may show different product numbers.

    • Mounting Brackets

    Quantity:

    Add Mounting Kit $2.50ea

    Product Notes:
  • RB6: 1 1/2" long L-bracket.Gold chromate color.
  • RB2: 2" long L-bracket.Gold chromate color.
  • RB9: 5" long double angle bracket.Gold chromate color.
  • RB8: 7" long single angle bracket.Gold Chromate color.
  • RB7: 3" long flat extension.Gold chromate color.
  • RB11: 6" long flat extension.Gold chromate color.
  • RB10: 12" long single angle bracket.Gold chromate color.

    • Reinforcement Plates

    Quantity:

    Add Mounting Bolt $1.00ea

    Product Notes:
  • RB1-1: Curved steel with attached nut.Measures 4 1/2" x 3".
  • RB3: Steel with attached nut. Measures 4 1/2"(not including tip) x 1 1/2".
  • RB4: Measures 3" x 1 1/2" and accepts a 7/16th fine thread bolt.

    • Retractors, Clip On Webbing

    Quantity:


    Product Notes:
  • CR1 black plastic retractor measures 3" x 2 1/2".
  • 80296 chrome original Roll-A-Belt.Barrell measures 2 1/2".


    • (SBL11-5-30-09)