On Sale Seat Belt Index Page Individual Components,Hardware And Webbing Contact Us:EMail Call Us:(302) 629-8508


Seat belts for 1970, 1971, 1972, 1973 and 1974 Mopar E body models including the Dodge Challenger and Plymouth Barracuda. Seat belt configurations include non retractable lap seat belts, retractable lap seat belts with shoulder harness and conversions kits that include combination retractable lap seat belts with shoulder harness. Buckle options include a vintage all metal chrome lift latch, vintage hammertone with black lift latch and all metal push button. Webbing colors are available to match most original and aftermarket interiors. No guarantee is made if a webbing or component color will match an existing seat belt or interior color.

All of the seat belts listed have been manufactured or assembled in the USA with USA certification tag confirming compliance with current FMVSS(Federal Motor Vehicle Safety Standards) 209 and 302.

Dodge Models Including;
  • Challenger: 1970-74
    Plymouth Models Including;
  • Barracuda: 1970-74

    Non Retractable Lap Seat Belts



    With Vintage Chrome Lift Latch Buckle

    Quantity

    Click Here To View Webbing Colors Or To Order Webbing Samples

    Add MH2 Mounting Kit $3.75ea
    Add 201K Retrofit Mounting Kit $12.00ea


    Product Notes: Click On Picture To Enlarge
  • Available with any webbing color on sample page. Contact us to order.
  • Buckle is vintage lift latch with bright chrome lid.
  • Length 60": Adjustable buckle side 36". Fixed latch side 24".
  • Length 74": Adjustable buckle side 40". Fixed latch side 34".
  • Lengths are approximate.
  • MH2 mounting kit includes bolts, washers, nuts and reinforcing washers.
  • A retrofit kit which includes underbody reinforcing plates to add support to the mounting points should be used when seat belts were not previously installed.
  • MH2 mounting kit not required when ordering a retrofit kit.
  • See related section at end of page to order for clip-on webbng retractors.
    For product questions or ordering assistance call (302)629-8508.



  • With Vintage Hammertone Lift Latch Buckle

    Quantity

    Click Here To View Webbing Colors Or To Order Webbing Samples

    Add MH4 Mounting Kit $5.25ea
    Add 201K Retrofit Mounting Kit $12.00ea


    Product Notes: Click On Picture To Enlarge
  • Available with any webbing color on sample page. Contact us to order.
  • Buckle is vintage lift latch with hammertone(wrinkled) black lid.
  • Anchor end fittings are bright chrome flat.
  • Length 60": Adjustable buckle side 36". Fixed latch side 24".
  • Length 74": Adjustable buckle side 40". Fixed latch side 34".
  • Lengths are approximate.
  • MH4 mounting kit includes bolts, washers, nuts and reinforcing washers.
  • A retrofit kit which includes underbody reinforcing plates to add support to the mounting points should be used when seat belts were not previously installed.
  • MH4 mounting kit not required when ordering a retrofit kit.
  • See related section at end of page to order for clip-on webbng retractors.
    For product questions or ordering assistance call (302)629-8508.



  • With Push Button Buckle

    Quantity

    Click Here To View Webbing Colors Or To Order Webbing Samples

    Add MH2 Mounting Kit $3.75ea
    Add 201K Retrofit Mounting Kit $12.00ea


    Product Notes: Click On Picture To Enlarge
  • Available with any webbing color on sample page. Contact us to order.
  • Length 60": Adjustable buckle side 36". Fixed latch side 24".
  • Length 74": Adjustable buckle side 40". Fixed latch side 34".
  • Lengths are approximate.
  • MH2 mounting kit includes bolts, washers, nuts and reinforcing washers.
  • A retrofit kit which includes underbody reinforcing plates to add support to the mounting points should be used when seat belts were not previously installed.
  • MH2 mounting kit not required when ordering a retrofit kit.
  • See related section at end of page to order for clip-on webbng retractors.
    For product questions or ordering assistance call (302)629-8508.

  • Retractable Seat Belts




    Retractable Lap Seat Belt
    Plus Non Retractable Shoulder Harness Car Set

    Quantity

    Click Here To View Webbing Colors Or To Order Webbing Samples

    Product Notes:(Sold As Car Set).Click On Picture To Enlarge
  • Available with any webbing color on sample page. Contact us to order.
  • Boots,covers and all plastic pieces are black.
  • Bucket set includes retractable lap seat belts plus non retractable shoulder harness for driver and passenger.
  • Bench set also includes matching front center non retractable lap seat belt.
  • Bucket set includes 12" sleeved buckle sides.
  • Bench set includes 20" long non sleeve buckle sides.
  • Buckle is a deluxe all metal push button with starburst design on press area.
  • See non retractable lap seat belts above for matching rear seat belts
    For product questions or ordering assistance call (302)629-8508.




  • Conversion Kit:Retractable Lap Seat Belt With Shoulder Harness Car Set

    Quantity

    Click Here To View Webbing Colors Or Order Webbing Samples

    Product Notes:(Sold As Car Set). Click On Picture To Enlarge
  • Use to upgrade/replace original independent retractable lap belt with harness to combination lap belt with shoulder harness.
  • Available with any webbing color on sample page. Contact us to order.
  • Boots,covers and all plastic pieces are black.
  • Bucket set includes retractable lap seat belt with shoulder harness for driver and passenger.
  • Bench set also includes matching front center non retractable lap seat belt.
  • Bucket set includes 12" buckle sides.
  • Bench set includes 20" long buckle sides.
  • Buckle is a deluxe all metal push button with starburst design on press area.
  • See non retractable lap seat belts above for matching rear seat belts
    For product questions or ordering assistance call (302)629-8508.


  • Related Items



    Reinforcement Plates

    Quantity:

    Add MH11 Zinc Chromate Mounting Bolt $1.30ea
    Add MH12 Zinc Chromate Lock Washer $.35ea

    Product Notes: Click On Picture To Enlarge
  • RB1-1:Curved steel with attached weldnut. Measures 4 1/2" x 3".
  • RB1: Same as RB1 except pair.
  • RB3:Steel with attached weldnut. Measures 4 1/2"(not including tip) x 1 1/2".
  • RB4:Measures 3" x 1 1/2". Accepts a 7/16th fine thread bolt.
    For product questions or ordering assistance call (302)629-8508.




  • Retractors, Clip On Webbing

    Quantity:

    Product Notes: Click On Picture To Enlarge
  • CR1 black plastic retractor measures 3" x 2 1/2".
  • 80296 chrome "Roll-A-Belt". Barrell measures 2 1/2".
  • Lengths listed are approximate.
    For product questions or ordering assistance call (302)629-8508


  • On Sale Seat Belt Main Index Page Individual Components,Hardware And Webbing Contact Us:EMail Call Us:(302) 629-8508


    Liability Disclaimer: The Andover Companies, and its subsidiaries assumes no responsibility for any damage due to the installation, either proper or improper, or for any damage or bodily injury arising from the use of any product. It is understood that the purchaser, installer and/or end user is responsible for the determination that the product purchased is suitable for its intended use and agrees to indemnify and hold The Andover Companies,Inc and its subsidiaries, harmless for any claim, action or demand arising from the installation and/or use of any product. There are no guarantees or warrantees on any product, implied or expressed, of fitness for a particular use with any such warrantees being specifically and expressly disclaimed. In the event any of the above limitations are held not enforceable our liability shall not exceed an amount equal to the amount paid to us for the product. Receipt of product or products confirm acceptance of disclaimer and liability transfer to purchaser, installer and/or end user.

    All information detailed within this document is based on information believed to be accurate but accuracy is not guaranteed. All pictures, diagrams and item descriptions are protected property of The Andover Companies,Inc and are not to be duplicated in any manner without written permission.

    (MoparE 4-12-17)