
The Seat Belts In This Section Include;
Non-Retractable Lap Seat Belts With A Vintage Lift Lid Or Modern Style Pushbutton Buckle
Retractable Lap Seat Belts With A Vintage Lift Lid Or Modern Style Pushbutton Buckle
Retractable Lap Seat Belts With A Shoulder Harness With Modern Style Pushbutton Buckle
To add retractability to a lap seat belt a chrome metal Roll-A-Belt(Item Number 80296) and a black plastic (Item Number CR1) clip on webbing retractor are available.
When installing a seat belt where it was not previously installed or if the factory underbody or shoulder harness reinforcement plates are damaged or missing it is suggested that a RB1 underbody or RB3 shoulder harness reinforcement plate with attached weld nut be used to add support to all of the mounting points.
Webbing colors tend to vary from mill run to mill run therefore a match to upholstery or carpet can not be guaranteed.
To Order:
Call:410-705-1503 8-5 EST Monday-Friday
Or use the secure on-line order form located at the end of section.
  
Non-Retractable Lap Seat Belts that are available with the following buckle styles;
With a standard pushbutton buckle with a metal underside that has a white "Press" and a red background on the pushbutton.
With a pre-1967 chrome lift lid release buckle that has a bright chrome lid and underside.
With a deluxe all metal buckle with a starburst logo on the pushbuuton.
All of the lap seat belts listed can be installed in the front or the rear and are available in extended lengths of 60" or 74". The pushbutton lap seat belts have pull thru webbing length adjustability on the latch end side. The chrome lift lid seat belts have webbing length pull thru adjustability on the buckle end side.
Depending on the mounting location the seat belt may be bolted directly to the floor or bolted to an RB2 L-bracket which is then bolted to the floor. If not using a RB2 L-bracket one MH2 mounting kit is required per belt. If using a L-bracket a MH8 mounting kit is required per L-bracket in addition to the one MH2 mounting kit that is required per belt.
The seat belts that have a * in front of the item number have all the plastic pieces color matched to the webbing color. The plastic pieces on all of the other seat belts listed are black regardless of the webbing color. Additional webbing colors have been listed to match the colors of aftermarket seat covers.
Click to view webbing colors or to order webbing samples.
w/Standard Buckle w/Lift Lid Buckle w/Deluxe Buckle
Color Year 60" 74" 60" 74" 60" 74"
Beige All *W8202A *W8203A *W8237A *W8211A *W8207A-60 *W8207A-74
Bright Red All *W8202N *W8203N *W8237N *W8211N *W8207N-60 *W8207N-74
Dark Red All *W8202F *W8203F *W8237F *W8211F *W8207F-60 *W8207F-74
Light Blue All W8202W W8203W W8237W W8211W W8207W-60 W8207W-74
Maroon/Burgundy All *W8202P *W8203P *W8237P *W8211P *W8207P-60 *W8207P-74
Orange All W8202X W8203X W8237X W8211X W8207X-60 W8207X-74
Silver All *W8202J *W8203J *W8237J *W8211J *W8207J-60 *W8207J-74
Black 1953-95 *W8202B *W8203B *W8237B *W8211B *W8207B-60 *W8207B-74
Brown/Dk Saddle 1976-80 W8202M W8202M W8237M W8211M W8207M-60 W8207M-74
Dark Blue 1976-83 *W8202C *W8203C *W8237C *W8211C *W8207C-60 *W8207C-74
Graphite 1976-88 *W8202U *W8203U *W8237U *W8211U *W8207U-60 *W8207U-74
Oxblood 1976-89 *W8202T *W8203T *W8237T *W8211T *W8207T-60 *W8207T-74
Gray 1976-95 *W8202K *W8203K *W8237K *W8211K *W8207K-60 *W8207K-74
Medium Saddle 1980 *W8202L *W8203L *W8237L *W8211L *W8207L-60 *W8207L-74
Carmel/Tan 1981 *W8202L *W8203L *W8237L *W8211L *W8207L-60 *W8207L-74
Red 1991-95 *W8202F *W8203F *W8237F *W8211F *W8207F-60 *W8207F-74
Mounting Kit,Per Lap Belt MH2B MH2B MH2B MH2B MH2B MH2B
Mounting Kit,Per L-Bracket MH8 MH8 MH8 MH8 MH8 MH8
L-Bracket,2" RB2 RB2 RB2 RB2 RB2 RB2
Plastic Clip On Retractor CR1 CR1 CR1 CR1 CR1 CR1
Metal Clip On Retractor 80296 80296 80296 80296 80296 80296
Underbody Reinforcement.Pair RB1 RB1 RB1 RB1 RB1 RB1

Retractable Lap Seat Belt with an automatic locking retractor that locks once pulled to the required position and is covered with a hard plastic boot to protect the internal mechanism from the elements.The retractor boot has a molded 4" extension which raises the height of the latch end closer to the top of the seat making it easier to reach.
One 200 mounting kit which includes the L-bracket to mount the retractor in an upright position is required per belt for mounting. If the Jeep has a center console a RB6 1 1/2" L-bracket or a RB8 7" L-bracket may be required to raise the buckle end side to a height above the console. If using a L-bracket one MH8 mounting kit is required per L-bracket in addition to the 200 mounting kit.
The buckle end included measures 12" long and is covered with a hard plastic sleeve. Matching non-retractable lap seat belts in an extended length of 60" or 74" are listed for use in the rear.
The seat belts that have a * in front of the item number have all of the plastic pieces color matched to the webbing color. The plastic pieces on all of the other seat belts listed are black regardless of the webbing color.
Click to view webbing colors or to order webbing samples.
Color Year w/Pushbutton Buckle w/Lift Lid Buckle
Front 60" 74" Front 60" 74"
Beige All *W8249A *W8202A *W8203A W8251A *W8237A *W8211A
Bright Red All *W8249N *W8202N *W8203N W8251N *W8237N *W8211N
Dark Red All *W8249F *W8202F *W8203F W8251F *W8237F *W8211F
Light Blue All W8249W W8202W W8203W W8251W W8237W W8211W
Maroon/Burgundy All *W8249P *W8202P *W8203P W8251P *W8237P *W8211P
Orange All W8249X W8202X W8203X W8251X W8237X W8211X
Silver All *W8249J *W8202J *W8203J W8251J *W8237J *W8211J
Black 1953-95 *W8249B *W8202B *W8203B W8251B *W8237B *W8211B
Brown/Dark Saddle 1976-80 W8249M W8202M W8203M W8251M W8237M *W8211M
Blue,Dark 1976-83 *W8249C *W8202C *W8203C W8251C *W8237C *W8211C
Graphite 1976-88 *W8249U *W8202U *W8203U W8251U *W8237U *W8211U
Oxblood 1976-89 *W8249T *W8202T *W8203T W8251T *W8237T *W8211T
Gray 1976-95 *W8249K *W8202K *W8203K W8251K *W8237K *W8211K
Saddle,Med/Carmel 1980-81 *W8249L *W8202L *W8203L W8251L *W8237L *W8211L
Red 1991-95 *W8249F *W8202F *W8203F W8251F *W8237F *W8211F
Mounting Kit.Per Belt 200 MH2B MH2B 200 MH2B MH2B
Mouting Kit.Per L-Bracket MH8 MH8 MH8 MH8 MH8 MH8
L-Bracket.1 1/2" RB6 RB6 RB6 RB6 RB6 RB6
L-Bracket,Drivers Side 7" RB8-L N/A N/A RB8-L N/A N/A
L-Bracket,Passengers Side 7" RB8-R N/A N/A RB8-R N/A N/A
Underbody Reinforcement.Pair RB1 RB1 RB1 RB1 RB1 RB1
Plastic Clip On Retractor N/A CR1 CR1 N/A CR1 CR1
Metal Chrome Clip On Retractor N/A 80296 80296 N/A 80296 80296
Retractable Lap Seat Belt With Shoulder Harness for installation in the front and in the rear when the rear area has a roll bar. When the webbing from the retractor is fully extended it measures 110" long with 30" that will remain outside of the retractor when the webbing is fully retracted. The retractor is covered with a hard plastic boot to protect the internal mechanism from the elements and is a web sensitive emergency locking type which allows for some movement but will lock based on a specific movement.
The buckle end that is included with the front seat belt measures 12" long and is covered with a hard plastic sleeve. The buckle end that is included with the rear retractable seat belt is non-sleeved and measures 12" long.
In most installations the front seat retractor is bolted to a RB6 1 1/2" L-bracket which is then bolted to the floor. One 300B mounting kit which includes the L-bracket and a shoulder bolt is required per front belt. If the Jeep is equipted with a center console a RB6 1/2" or RB8 7" L-bracket may be required to raise the buckle end side above the console. One MH8 mounting kit is required for each additional L-bracket in addition to the one 300B mounting kit.
Most rear seat retractors are bolted directly to the base of a roll bar or directly to the interior side panel. One MH2 mounting kit plus one MH6 shoulder harness mounting shoulder bolt is required per belt. If using an L-brackets to adjust the mounting point one additional MH2 mounting kit will mount two L-brackets.
The seat belts that have a * in front of the item number have all of the plastic pieces color matched to the webbing color. The plastic pieces on all of the other seat belts are black regardless of the webbing color. Matching non-retractable lap seat belts are listed in extended length of 60" to be used in the rear when installing the retractable seat belts with shoulder harness in the front only. A 74" rear non-retractable lap seat belt is also listed as an option.
Color Year w/Shoulder Harness Matching Non-Retractable Lap Belt
Front Rear 60" 74"
Beige All *W8282A *W8269A *W8202A *W8203A
Bright Red All *W8282N *W8269N *W8202N *W8203N
Dark Red All *W8282F *W8269F *W8202F *W8203F
Light Blue All W8282W W8269W W8202W W8203W
Maroon/Burgundy All *W8282P *W8269P *W8202P *W8203P
Orange All W8282X W8269X W8202X W8203X
Silver All *W8282J *W8269J *W8202J *W8203J
Black 1953-95 *W8282B *W8269B *W8202B *W8203B
Brown/Dark Saddle 1976-80 W8282M W8269M W8202M W8203M
Blue,Dark 1976-83 *W8282C *W8269C *W8202C *W8203C
Graphite 1976-88 *W8282U *W8269U *W8202U *W8203U
Oxblood 1976-89 *W8282T *W8269T *W8202T *W8203T
Gray 1976-95 *W8282K *W8269K *W8202K *W8203K
Saddle,Med/Carmel 1980-81 *W8282L *W8269L *W8202L *W8203L
Red 1991-95 *W8282F *W8269F *W8202F *W8203F
Mounting Kit 300B MH2B MH2B MH2B
Shoulder Harness Shoulder Bolt MH6 MH6 N/A N/A
L-Bracket,1 1/2" RB6 RB6 RB6 RB6
L-Bracket,Drivers Side 7" RB8-L RB8 N/A N/A
L-Bracket,Passengers Side 7" RB8-R RB8 N/A N/A
Shoulder Harness Reinforcement RB3 RB3 N/A N/A
Underbody Reinforcement Plate.Pair. RB1 RB1 RB1 RB1
| Non-Retractable Lap Seat Belts |
Price |
Color |
Order |
|