| 1955-1995 Jeep Seat Belts | Contact Us | Main Index |
When installing a seat belt where it was not previously installed or if the factory underbody reinforcement plates are damaged or missing it is suggested that a RB1-1(each) or RB1(pair) of replacement underbody reinforcement plate with attached weld nut be used to add support to all of the mounting points.Webbing colors tend to vary from mill run to mill run therefore a match to upholstery or carpet can not be guaranteed.If a match to an existing interior is required it is suggested that a webbing sample be ordered.
Retractable Lap Seat Belt With Shoulder Harness With Cable Buckle End with web sensitive emergency locking retractor that allows for some movement but will lock on a specific motion. The retractor is covered with a hard plastic boot to protect the internal mechanism from the elements.
The buckle end that is included with the front retractable seat belts includes a red push button end release buckle with a steel cable covered with a rubber sleeve that measures 12" end to end. The buckle end that is included with the rear retractable seat belts includes a red push button end release buckle measuring 12" long end to end without a sleeve or cable to allow it to slide between the seat back and the seat bottm to the mounting point. In most rear installations the buckle end anchor will bolt directly to the factory installed buckle end bracket.
When possible the original mounting hardware should be re-used. In the event that original mounting hardware is not available replacement mounting hardware has been listed that can be used for most installations.
All of the plastic pieces except for the red push button on the buckle are black regardless of the webbing color. Additional webbing colors have been listed to match aftermarket seat covers.
Matching rear seat non-retractable seat belts that measure 60" long end to end are available to be used in the rear when only installing a retractable lap with shoulder harness seat belt in the front. A 74" long rear non-retractable lap seat belt is also listed as an option.
To Order:
Call:410-705-1503 8-5 EST Monday-Friday
Or use the secure on-line order form located at the end of section.
Click to view webbing colors or to order webbing samples.
Color Year w/Shoulder Harness Non-Retractable Lap Belt
Front Rear 60" 74"
Beige All W8300A-12 W8201A W8271A-60 W8271A-74
Blue,Dark All W8300C-12 W8201C W8271C-60 W8271C-74
Bright Red All W8300N-12 W8201N W8271N-60 W8271N-74
Dark Red All W8300F-12 W8201F W8271F-60 W8271F-74
Light Blue All W8300W-12 W8201W W8271W-60 W8271W-74
Maroon/Burgundy All W8300P-12 W8201P W8271P-60 W8271P-74
Orange All W8300X-12 W8201X W8271X-60 W8271X-74
Silver All W8300J-12 W8201J W8271J-60 W8271J-74
Black All W8300B-12 W8201B W8271B-60 W8271B-74
Gray 1997-2000 W8300K-12 W8201K W8271K-60 W8271K-74
Charcoal 1997-2001 W8300U-12 W8201U W8271U-60 W8271U-74
Saddle/Tan All W8300L-12 W8201L W8271L-60 W8271L-74
Mounting Kit 300B 300B MH2B MH2B
Anchor Bolt 7/16 x 20 x 1" MH1 MH1 MH1 MH1
Anchor Bolt 7/16 x 20 x 1 1/2" MH1-1 MH1-1 MH1-1 MH1-1
Shoulder Harness Shoulder Bolt MH6 MH6 MH6 MH6
Shoulder Harness Reinforcement Plate RB3 RB3 N/A N/A
Underbody Reinforcement Plate.Each RB1-1 RB1-1 RB1-1 RB1-1
Underbody Reinforcement Plate.Pair RB1 RB1 RB1 RB1
Note:When purchasing RB1-1,RB1 or RB3 replacement reinforcing plates mounting kits are not required. Order one MH1-1 bolt per underbody and one MH6 bolt per RB3 shoulder harness reinforcing plate.