On Sale More Non Retractable Options More Retractable Options Seat Belt Main Index Page
Components And Hardware Build Your Own Contact Us:EMail Call Us:(302) 629-8508


Seat belts for Pontiac Firebird and Pontiac Trans Am including non retractable lap seat belts, retractable lap seat belts and retractable lap seat belts with shoulder harness sets. Seat belt buckle options include wintage lift latch with bright chrome lid, vintage lift latch with black hammertone lid and push button with a starburst design or GM logo on the press area. Webbing choices include a lower cost 7 panel and original appearence 3 panel. No guarantee is made if webbing or a component color will match an existing seat belt or interior color.

The seat belts and related hardware are new and manufactured to meet or exceed FMVSS (U.S. Federal Motor Vehicle Safety Standards) 209 and 302 with all of the seat belts manufactured or assembled in the USA.

When a factory underbody reinforcing plate is damaged or missing order RB1-1(each) or RB1(pair) underbody reinforcing plate with attached weld nut to add support to the mounting point. See related mouting hardware at the end of page.

Non Retractable Lap Seat Belts




With Vintage Lift Latch

Quantity

Click Here To View Webbing Colors Or Order Webbing Samples

Upgrade Anchor Ends From Yellow Zinc To (CF)Chrome +$2.50ea
Upgrade Buckle To With (8387B)Black Hammertone Lid +$10.00ea


Add MH2-YZ Mounting Kit(Yellow Zinc) $3.25ea
Add MH4 Mounting Kit(Zinc Chromate) $5.00ea
Add 201K-Z Retrofit Mounting Kit (Zinc Chromate Hardware) $12.00ea
Add CR1 Plastic Clip-On Webbing Retractor $9.50ea
Add 80296 Chrome "Roll-A-Belt" Clip-On Webbing Retractor $20.00ea


Product Notes: Click On Picture To Enlarge
  • Can be ordered with any webbing color on sample page.
  • Length 60": Adjustable buckle side 40". Fixed side 20".
  • Length 74": Adjustable buckle side 40". Fixed side 34".
  • >MH2-YZ and MH4 mounting kit includes 7/16-20 bolts, washers, nuts and reinforcing washers.
  • A retrofit kit should be used when seat belts were not previously installed.
  • 201K-Z retrofit kit includes underbody reinforcement plates and 7/16-20 zinc chromate hardware.
  • MH2-YZ or MH4 kits are not required when purchasing a retrofit kit.
  • Lengths listed are approximate.
    For product questions or ordering assistance call (302)629-8508.



  • With Push Button Buckle


    Quantity

    Click Here To View Webbing Colors Or To Order Webbing Samples

    Upgrade Anchor Ends From Yellow Zinc To (CF)Chrome +$2.50ea
    Upgrade Buckle To With (8380)GM Logo +$8.00ea

    Add MH2-YZ Mounting Kit(Yellow Zinc) $3.25ea
    Add MH4 Mounting Kit(Zinc Chromate) $5.00ea
    Add 201K-Z Retrofit Mounting Kit(Zinc Chromate Hardware) $12.00ea
    Add CR1 Plastic Clip-On Webbing Retractor $9.50ea
    Add 80296 Chrome "Roll-A Belt" Clip-On Webbing Retractor $20.00ea

    Product Notes: Click On Picture To Enlarge
  • Can be ordered with any webbing color on sample page.
  • Length 60":Adjustable side 40". Buckle side 20".
  • Length 74":Adjustable side 40". Buckle side 34".
  • MH2-YZ and MH4 mounting kit includes 7/16-20 bolts, washers, nuts and reinforcing washers.
  • A retrofit kit should be used when seat belts were not previously installed.
  • 201K-Z retrofit kit includes underbody reinforcement plates and 7/16-20 zinc chromate hardware.
  • MH2-YZ or MH4 kits are not required when purchasing a retrofit kit.
  • Lengths listed are approximate.
    For product questions or ordering assistance call (302)629-8508.



  • Deluxe GM Push Button Buckle With 7 Panel Webbing

    Quantity

    Click Here To View Webbing Colors Or To Order Webbing Samples

    Upgrade Anchor Ends From Yellow Zinc To (CF)Chrome +$2.50ea

    Add MH2-YZ Mounting Kit(Yellow Zinc) $3.25ea
    Add MH4 Mounting Kit(Zinc Chromate) $5.00ea
    Add 201K-Z Retrofit Mounting Kit(Zinc Chromate Hardware) $12.00ea
    Add CR1 Plastic Clip-On Webbing Retractor $9.50ea
    Add 80296 Chrome "Roll-A Belt" Clip-On Webbing Retractor $20.00ea

    Product Notes: Click On Picture To Enlarge
  • Can be ordered with any 7 panel webbing color on sample page
  • Length 60":Adjustable side 40". Buckle side 20".
  • Length 74":Adjustable side 40". Buckle side 34".
  • MH2-YZ and MH4 mounting kit includes 7/16-20 bolts, washers, nuts and reinforcing washers.
  • A retrofit kit should be used when seat belts were not previously installed.
  • 201K-Z retrofit kit includes underbody reinforcement plates and 7/16-20 zinc chromate hardware.
  • MH2-YZ or MH4 kits are not required when purchasing a retrofit kit.
  • Lengths listed are approximate.
  • For product questions or ordering assistance call (302)629-8508.



  • Deluxe GM Push Button Buckle With 3 Panel Webbing

    Quantity

    Click Here To View Webbing Colors Or To Order Webbing Samples

    Upgrade Anchor Ends From Yellow Zinc To (CF)Chrome +$2.50ea

    Add MH2-YZ Mounting Kit(Yellow Zinc) $3.25ea
    Add MH4 Mounting Kit(Zinc Chromate) $5.00ea
    Add 201K-Z Retrofit Mounting Kit(Zinc Chromate Hardware) $12.00ea
    Add CR1 Plastic Clip-On Webbing Retractor $9.50ea
    Add 80296 Chrome "Roll-A Belt" Clip-On Webbing Retractor $20.00ea

    Product Notes: Click On Picture To Enlarge
  • Can be ordered with any 3 panel webbing color on sample page.
  • Length 60":Adjustable side 40". Buckle side 20".
  • Length 74":Adjustable side 40". Buckle side 34".
  • MH2-YZ and MH4 mounting kit includes 7/16-20 bolts, washers, nuts and reinforcing washers.
  • A retrofit kit should be used when seat belts were not previously installed.
  • 201K-Z retrofit kit includes underbody reinforcement plates and 7/16-20 zinc chromate hardware.
  • MH2-YZ or MH4 kits are not required when purchasing a retrofit kit.
  • Lengths listed are approximate.
    For product questions or ordering assistance call (302)629-8508.


  • Retractable Lap Seat Belt Sets



    1967-69 With 3 Panel Webbing

    Quantity

    Click Here To View Webbing Colors Or Order Webbing Samples

    Product Notes: Click On Picture To Enlarge
  • Sold As Set. Includes seat belts for driver and passenger.
  • See non retractable push button lap seat belts with 3 panel webbing for matching rear seat belts.
  • Includes original appearence 3 panel webbing.
    For product questions or ordering assistance call (302)629-8508.


  • Retractable Lap Seat Belt With Shoulder Harness Sets



    1974-81 Front Set

    Quantity

    Click Here To View Webbing Colors Or Order Webbing Samples

    Add (ADJ3B-2)Black Stop Buttons(2) (Not Installed) $5.00ea
    Add (ADJ3G-2)Grey Stop Buttons(2) (Not Installed) $5.00ea
    Add (ADJ3T-2)Tan Stop Buttons(2) (Not Installed) $5.00ea
    Product Notes: Click On Picture To Enlarge
  • Sold As Set. Includes seat belts for driver and passenger.
  • Can be ordered with any 7 panel webbing color on sample page.
  • See matching rear retractactable lap seat belt set below.
  • A web stop keeps the webbing from sliding down the webbing when seat belt is not in use.
    For product questions or ordering assistance call (302)629-8508.



  • 1978-81 Rear Retractable Lap Seat Belt Set

    Quantity

    Click Here To View Webbing Colors Or To Order Webbing Samples


    Product Notes: Click On Picture To Enlarge
  • Sold As Set. Includes seat belts for driver and passenger.
  • Can be ordered with any 7 panel webbing color on sample page.
    For product questions or ordering assistance call (302)629-8508.


  • Related Hardware

    Adjuster: Latch Stop

    Quantity:

    Product Notes: Click on picture to enlarge
  • Keeps shoulder harness latch from sliding down webbing when belt is not in use.
  • Seat belts do not need to be removed in order to install.
  • Does not alter the retractor safety features.
    For product questions or ordering assistance call (302)629-8508


  • Reinforcement Plates

    Quantity:

    Add MH11 Zinc Chromate Mounting Bolt $1.30ea
    Add MH12 Zinc Chromate Lock Washer $.35ea

    Product Notes: Click On Picture To Enlarge
  • RB1-1:Curved steel with attached weldnut. Measures 4 1/2" x 3".
  • RB1:Same as RB1 except pair.
  • RB3:Steel with attached weldnut. Measures 4 1/2"(not including tip) x 1 1/2".
  • RB4:Measures 3" x 1 1/2". Accepts a 7/16th fine thread bolt.
  • Measurements listed are approximate.
    For product questions or ordering assistance call (302)629-8508.

  • Liability Disclaimer: The Andover Companies, and its subsidiaries assumes no responsibility for any damage due to the installation, either proper or improper, or for any damage or bodily injury arising from the use of any product. It is understood that the purchaser, installer and/or end user is responsible for the determination that the product purchased is suitable for its intended use and agrees to indemnify and hold The Andover Companies,Inc and its subsidiaries, harmless for any claim, action or demand arising from the installation and/or use of any product. There are no guarantees or warrantees on any product, implied or expressed, of fitness for a particular use with any such warrantees being specifically and expressly disclaimed. In the event any of the above limitations are held not enforceable our liability shall not exceed an amount equal to the amount paid to us for the product. Receipt of product or products confirm acceptance of disclaimer and liability transfer to purchaser, installer and/or end user.

    All information detailed within this document is based on information believed to be accurate but accuracy is not guaranteed. All pictures, diagrams and item descriptions are protected property of The Andover Companies,Inc and are not to be duplicated in any manner without written permission.

    (Firebird 5-14-15)