Non retractable lap seat belts for 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965 and 1966 Chevrolet models including Belair, Caprice Biscayne, Impala coupes, convertibles and wagons. The seat belt listed has an original appearance aviator lift release buckle with a chrome lid and spring hinged metal to metal contact closing devise, matched chrome tongue with a rectangular cut out, 4 row/panel original style webbing and chrome fixed anchor end fittings that bolt directly to the floor. Most front seats will use a 74" long non retractable lap seat belt and a rear seat will use a 60" long non retractable lap seat belt.
All of the seat belts and related hardware are new and manufactured to meet or exceed FMVSS (U.S. Federal Motor Vehicle Safety Standards) 209 and 302 with all of the seat belts manufactured or assembled in the USA..
When installing a seat belt where it was not previously installed it is suggested that a 203K retrofit mounting kit be used which include RB1 underbody reinforcement plates with attached weldnut to add support to the mounting points. A MH4 or MH2-YZ mounting kit or RB1 underbody reinforcing plates are not required when purchasing a retrofit mounting kit. To add retractability to one side of a non retractable lap seat belt an original (80296) style metal clip-on webbing "Roll-A Belt" retractor and a replacement (CR1) black plastic retractor are available. A paintable anchor end cover(CVR Series) that snaps on to the mounting bolt head to cover both the bolt and the end fitting are available for a finished look.
Click on picture to enlarge. Also listed is a lower cost vintage buckle non retractable lap seat belt (W8237 and W8211 Series) that utilize a vintage chrome lift lid buckle with 7 row/panel current production webbing and yellow zinc fixed end fittings that bolt directly to the floor for those installations that do not require an original style aviator buckle non retractable lap seat belt. Additional seat belt options have also been listed at the end of the section including vintage lift buckles with dull satin, color coated and color coated with bowtie emblem lids plus push button buckles that include a standard plastic with red or black press, an all metal and an all metal with GM logo.
Call:(302)629-8508 8-5 EST Monday-Friday
Or use the secure on-line order form below.
Webbing colors are not guaranteed to match an existing seat belt, interior or interior component.
Click Here to view webbing colors or to order webbing samples.
Contact us for webbing colors not listed.
These seat belts can be ordered with any webbing color shown on sample page.
Description Item Number
Aviator Buckle 74" Non Retractable Lap Seat Belt W8755 Series
Aviator Buckle 60" Non Retractable Lap Seat Belt W8756 Series
Vintage Buckle 74" Non Retractable Lap Seat Belt W8211 Series
Vintage Buckle 60" Non Retractable Lap Seat Belt W8237 Series
Aviator Lap Belt Mounting Kit. Zinc Chromate Hardware. Per Lap Seat Belt MH4
Cover. Anchor End Fitting And Bolt Head. Black. Paint To match. CVR100
Vintage Lap Belt Mounting Kit. Yellow Zinc Hardware. Per Lap Seat Belt MH2-YZ
Retrofit Mounting Kit. Per Lap Seat Belt 203K
Underbody Reinforcement Plates With Welnut (2) RB1
Webbing Retractor, Clip-On. Replacement. Black Plastic CR1
Webbing Retractor, Clip-On Chrome Original Style "Roll-A Belt" 80296
Year Color With Aviator Buckle With Vintage Buckle
74" Long 60" Long 74" Long 60" Long
1958-66 Black W8755-01 W8756-01 W8211B W8237B
1963-65 Blue,Dark W8755-02 W8756-02 W8211C W8237C
1958-66 Blue, With Silver Tint W8755-45 W8756-45 N/A N/A
1958-66 Blue,Medium N/A N/A W8211D W8237D
1958-66 Brown,Dark N/A N/A W8211M W8237M
1959-62 Brown,Medium(Copper) N/A N/A W8211H W8237H
1958-66 Gray,Medium N/A N/A W8211K W8237K
1958 Green,Dark N/A N/A W8211G W8237G
1959-65 Red,Bright W8755-22 W8756-22 W8211N W8237N
1959-60 Red,Dark W8755-58 W8756-58 W8211F W8237F
1958 Gold, Medium/Tan W8755-60 W8756-60 N/A N/A
1958-66 Saddle,Tan N/A N/A W8211L W8237L
1958-59 Silver W8755-27 W8756-27 W8211J W8237J
1958-66 Tan N/A N/A W8211V W8237V
1959-62 Aqua,Turquoise W8755-47 W8756-47 W8211E W8237E
1959-66 White N/A N/A W8211S W8237S
1958-66 Chevrolet Non Retractable Lap Belts
Mounting Hardware And Related
Additional Seat Belt Buckle Styles
Click on the buckle picture to view additional non retractable lap seat belts, non retractable lap seat belts with shoulder harness, retractable lap seat belts and retractable lap seat belts with shoulder harness options.
Vintage Deluxe Lift Latch With Black Hammertone Lid: Buckle has metal to metal contact a bright chrome base and bright chrome matched tongue.
Vintage Deluxe Lift Latch With Chevrolet Bowtie:Buckle has recessed insert and matched to the webbing color lid with metal to metal contact, bright chrome base and bright chrome matched tongue.
Vintage Satin Lift Lid:Buckle has metal to metal contact with dull satin lid, bright chrome underside and bright chrome matched tongue.
Standard Push Button: Buckle is metal with a color matched to the webbing plastic cover with a red back ground with white "Press" on press area.
Standard Push Button: Buckle is metal with a color matched to the webbing plastic cover with a black back ground with white "Press" on press area.
Deluxe Starburst Push Button:Buckle is metal with adjustable or non adjustable matched tongue.
Standard GM Logo Push Button:Buckle has metal underside and color matched to the webbing plastic cover with non adjustable matched chrome tongue.
Deluxe GM Logo Push Button: Buckle is all metal with adjustable or non adjustable matched tongue.
Liability Disclaimer: The Andover Companies, Inc., and its subsidiaries assume no responsibility for any damage due to the installation, either proper or improper, or for any damage or bodily injury arising from the use of any product(s). The purchaser, installer and/or end user is responsible for the determination that any product(s) purchased is suitable for, or the fitness of, any product(s) purchased for its intended use and agrees to indemnify and hold The Andover Companies, Inc and its subsidiaries, harmless from any claim, action or demand arising from the installation and/or use of any product(s). In the event any of the above limitations are held not enforceable our liability shall not exceed an amount equal to the amount paid to us for the product(s). Receipt of product(s) confirms the acceptance of this disclaimer and the confirmation of the understanding of the full and complete liability transfer to purchaser, installer and/or end user.
All information detailed within this document is based on information believed to be accurate but accuracy is not guaranteed.All pictures,diagrams and item descriptions are protected property of The Andover Companies,Inc and are not to be duplicated in any manner without written permission.