Main Seat Belt Index Page Contact Us:EMail Call Us:(302)629-8508
On Sale Build Your Own Components,Hardware And Webbing


Seat belts for 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1982, 1983, 1984, 1985 and 1986 Ford Bronco models including the Ford Bronco wagon, Ford Bronco halfcab, Ford Bronco roadster and Ford Bronco sport. Seatbelt configurations include non retractable and retractable lap seat belt plus retractable lap seat belts with shoulder harness with original equipment style push button buckles with starburst designs on the press area.

All of the seat belts and related hardware are new and manufactured to meet or exceed FMVSS (U.S. Federal Motor Vehicle Safety Standards) 209 and 302 and are manufactured or assembled in the USA.

Note: When installing a seat belt in a location where seat belts were not previously installed a retrofit mounting kit which includes body reinforcing plates and mounting hardware should be used to add support to the mounting points.


Non Retractable Lap Seat Belt

Quantity
Click Here To View Available 7 Panel Webbing Colors Or To Order Webbing Samples

Add MH2-YZ Mounting Kit $3.75ea
Add 201K-Z Retrofit Mounting Kit $12.00ea

Product Notes: Click On Picture To Enlarge
  • Sold each.
  • The buckle is original equipment style all metal pushbutton with starburst design on press area.
  • Webbing is 7 panel. Contact us to order colors not listed.
  • Webbing is not guaranteed to match an original or aftermarket interior or existing seat belt.
  • Lengths,Approximate: Adjustable latch side 40". Fixed buckle side 34".
  • Retrofit kit, including reinforcing plates should be used when seat belts were not factory installed.
  • MH2-YZ mounting kit is not required when purchasing a retrofit kit.
  • For product questions or ordering assistance call (302)629-8508.


  • Non Retractable Lap Seat Belt

    Quantity
    Click Here To View Available 3 Panel Webbing Colors Or To Order Webbing Samples

    Add MH2-YZ Mounting Kit $3.75ea
    Add 201K-Z Retrofit Mounting Kit $12.00ea

    Product Notes: Click On Picture To Enlarge
  • Sold each.
  • The buckle is original equipment style black plastic capped with starburst on the press area.
  • Webbing is original style 3 panel webbing.
  • Webbing is not guaranteed to match an original or aftermarket interior or existing seat belt.
  • Lengths,Approximate: Adjustable buckle side 40". Fixed latch side 34".
  • Retrofit kit, including reinforcing plates should be used when seat belts were not factory installed.
  • MH2-YZ mounting kit is not required when purchasing a retrofit kit.
  • For product questions or ordering assistance call (302)629-8508.



  • 1968-77 Retractable Lap Seat Belt Set

    Quantity
    Click Here To View Available 3 Panel Webbing Colors Or To Order Webbing Samples

    Product Notes: Click On Picture To Enlarge
    Sold as set. Includes seat belts for driver and passenger.
  • The buckle is original equipment style black plastic capped with starburst design on press area.
  • The buckle,retractor boots and all plastic pieces are black.
  • Webbing is original style 3 panel.
  • Webbing is not guaranteed to match an original or aftermarket interior or existing seat belt.
  • Buckle side measures approximately 33" long.
  • Retractor is non locking with extended webbing length of approximately 20".
  • For product questions or ordering assistance call (302)629-8508.



  • 1978-79 Front Retractable Lap Seat Belt With Shoulder Harness Set

    Quantity
    Click Here To View Available 3 Panel Webbing Colors Or To Order Webbing Samples



    Product Notes: Click On Picture To Enlarge
    Sold as set. Includes seat belts for driver and passenger.
  • Buckle is original equipment style all metal push button with starburst design on press area.
  • Retractor covers,buckle sleeves and all plastic pieces are black.
  • Webbing is original style 3 panel.
  • Webbing is not guaranteed to match an original or aftermarket interior or existing seat belt.
  • Buckle side measures approximately 16" and is covered with a molded plastic sleeve.
  • The webbing when fully extended from retractor measures approximately 96" long.
    For product questions or ordering assistance call (302)629-8508.


  • 1980-86 Front Retractable lap Seat Belt With Shoulder Harness Set

    Quantity
    Click Here To View Available 7 Panel Webbing Colors Or To Order Webbing Samples



    Product Notes:Click On Picture To Enlarge
    Sold as set. Includes seat belts for driver and passenger.
  • Contact us for the availability of colors not listed.
  • Buckle is original style all metal push button with starburst design on the press area.
  • Retractor covers,buckle sleeves and all plastic pieces are black.
  • Buckle side measures approximately 15" long covered with a molded plastic sleeve.
  • Webbing is not guaranteed to match an original or aftermarket interior or existing seat belt.
  • The webbing when fully extended from shoulder harness measures approximately 134" long.
    For product questions or ordering assistance call (302)629-8508.


  • Reinforcement Plates

    Quantity:
    Add MH11 Zinc Chromate Mounting Bolt $1.30ea
    Add MH12 Zinc Chromate Lock Washer $.35ea

    Product Notes: Click On Picture To Enlarge
  • RB1-1: Curved steel with weldnut. Measures 4 1/2" x 3".
  • RB1: Same as RB-1 except pair.
  • RB3: Steel with weldnut. Measures 4 1/2"(not including tip) x 1 1/2".
  • RB4: Measures 3" x 1 1/2". Accepts a 7/16th fine thread bolt.
  • For product questions or ordering assistance call (302)629-8508.


  • Liability Disclaimer: The Andover Companies, and its subsidiaries assumes no responsibility for any damage due to the installation, either proper or improper, or for any damage or bodily injury arising from the use of any product. It is understood that the purchaser, installer and/or end user is responsible for the determination that the product purchased is suitable for its intended use and agrees to indemnify and hold The Andover Companies,Inc and its subsidiaries, harmless for any claim, action or demand arising from the installation and/or use of any product. There are no guarantees or warrantees on any product, implied or expressed, of fitness for a particular use with any such warrantees being specifically and expressly disclaimed. In the event any of the above limitations are held not enforceable our liability shall not exceed an amount equal to the amount paid to us for the product. Receipt of product or products confirm acceptance of disclaimer and liability transfer to purchaser, installer and/or end user.

    All information detailed within this document is based on information believed to be accurate but accuracy is not guaranteed. All pictures, diagrams and item descriptions are protected property of The Andover Companies,Inc and are not to be duplicated in any manner without written permission.

    (Bronco 1-5-16)