On Sale More Buckle Choices Main Index Page Contact Us:EMail Call Us:(302) 629-8508
Matching Non Retractable Belts Hardware And Components Build Your Own
Push button OEM style all metal buckle seat belts with a starburst logo on the press area that are available as a non retractable lap seat belt, non retractable lap seat belt with shoulder harness, retractable lap seat belt, retractable lap seat belt with shoulder harness and dual retractor lap seat belt with shoulder harness with webbing colors to match most original and aftermarket American and imported automobile and truck interiors. All of the seat belts and related hardware are new and manufactured to meet or exceed FMVSS (U.S. Federal Motor Vehicle Safety Standards) 209 and 302 with all of the seat belts manufactured or assembled in the USA.

The seat belts listed are an aftermarket universal fit and are not implied to be vehicle or application specific. No guarantee is made as to fit or if a webbing color or component color will match an existing seat belt or interior color. Click Here for vehicle specific seat belts, non automotive seat belts and seatbelts for specialty applications.

Retractable Lap Seat Belts

General Information
  • The seat belts listed can be used for driver or passenger side installation.
  • Seat belt warning or any dash electrical connectors are not included.
  • All of the seat belts, components, mounting kits and hardware are priced and sold each/per person.
  • The retractor is automatic locking(ALR) which locks when the webbing has been pulled and released.
  • To adjust the length once retractor has locked the webbing must be released back to the retractor and re-pulled.

    Buckle Ends Selection
  • A buckle side with a plastic sleeve in most cases is used in a vehicle with bucket seats.
  • A buckle side without a plastic sleeve in most cases is used in a vehicle with bench seat.

    Boot Length Selection
  • Most installations will use a 4" long retractor boot.
  • If the seat is raised a 7" long boot will increase the height of the latch end making it easier to reach.

    Mounting Hardware
  • Always use factory mounting points when possible.
  • Retrofit mounting kits should be used if the location seat belts are to be installed did not previously have seat belts factory installed.
  • Retrofit mounting kits include underbody reinforcement plates to add support to the mounting points, L-bracket(s) to mount the retractor upright and mounting hardware.
  • When a retrofit mounting kit is purchased a basic or standard mounting kit is not required.
  • An additional L-bracket may be required based on the mounting position or location of the retractor or buckle side. See mounting brackets at the end of section.
  • For suggestions regarding the creation or reinforcement of the mounting points refer to the Help Page.



    With 4" Long Retractor Boot

    Quantity

    Click Here To View Webbing Colors Or To Order Webbing Samples

    Add 200K Mounting Kit $4.25ea
    Add RB6 L-Bracket For Buckle Side $2.50ea
    Add MH8 Mounting Kit For Buckle Side RB6 L-Bracket $1.25ea
    Add 202K Retrofit Mounting Kit For Bucket Seats $16.25ea
    Add 204K Retrofit Mounting Kit For Bench Seats $13.75ea

    Product Notes:Click On Picture To Enlarge
  • The retractor boot and all of the plastic pieces are black.
  • The webbing fully extended from the retractor measures 54" Long.
  • 200K mounting kit includes 7/16 bolts, washers, nuts, reinforcing washers and L-bracket.
  • A 202K or 204K retrofit kit should be used when seat belts were not previously installed.
  • Retrofit kits include underbody reinforcement plates, L-bracket(s) and mounting hardware.
  • 200K mounting kit is not required when purchasing a retrofit kit.
  • Lengths listed are approximate.
  • Click Here To View Matching Non Retractable Seat Belts
    For product questions or ordering assistance call (302)629-8508.




  • With 7" Long Retractor Boot

    Quantity
    **After the color indicates that the retractor boot is available color matched to the webbing color.

    Click Here To View Webbing Colors Or To Order Webbing Samples

    Add (CM7B)Color Matched Retractor Boot + $2.50ea

    Add 200K Mounting Kit $4.25ea
    Add RB6 L-Bracket For Buckle Side $2.50ea
    Add MH8 Mounting Kit For Buckle Side RB6 L-Bracket $1.25ea
    Add 202K Retrofit Mounting Kit For Bucket Seats $16.25ea
    Add 204K Retrofit Mounting Kit For Bench Seats $13.75ea

    Product Notes:Click On Picture To Enlarge
  • Unless color matched retractor boot is available and ordered all boots are black.
  • The webbing fully extended from the retractor measures 54" Long.
  • 200K mounting kit includes 7/16 bolts, washers, nuts, reinforcing washers and L-bracket.
  • A 202K or 204K retrofit kit should be used when seat belts were not previously installed.
  • Retrofit kits include underbody reinforcement plates, L-bracket(s) and mounting hardware.
  • 200K mounting kit is not required when purchasing a retrofit kit.
  • Lengths listed are approximate.
  • Click To View Matching Non Retractable Seat Belts
    For product questions or ordering assistance call (302)629-8508.
  • Retractable Lap And Shoulder Harness Seat Belts

    General Information
  • The seat belts listed can be used for a drivers or passenger side installation.
  • All of the seat belts, components, mounting kits and hardware are priced and sold each/per person.
  • The retractor is emergency locking(ELR) with a web sensitive inertia reel that locks instantly on sudden webbing movement.
  • The seat belts listed are universal fit without electrical wiring and are not guaranteed to fit all applications.

    Buckle End Selection
  • A buckle end with a plastic sleeve in most cases is used in a vehicle with bucket seats.
  • A buckle end without a plastic sleeve in most cases is used in a vehicle with bench seats.

    Shoulder Harness Configuration And Extended Lengths Selection
  • For assistance determining the extended length, door post extension type and or the creation of a shoulder harness mounting point refer to Help Page.

    Mounting Hardware
  • Always use factory mounting points when possible.
  • Retrofit mounting kits should be used if the location seat belts are to be installed did not previously have seat belts factory installed.
  • Retrofit mounting kits include underbody reinforcement plates to add support to the mounting points, L-bracket(s) to mount the retractor upright and mounting hardware.
  • When a retrofit mounting kit is purchased a basic or standard mounting kit is not required.
  • An additional L-bracket may be required based on the mounting position or location of the retractor or buckle side. See mounting brackets at the end of section.
  • For suggestions regarding the creation or reinforcement of the mounting points refer to the Help Page.








    Lap Belt With Harness:
    -Without Door Post Extension-

    Quantity

    **After the color indicates all of plastic pieces are color matched to webbing.

    Click Here To View Webbing Colors Or To Order Webbing Samples

    Add 200K Mounting Kit $5.25ea
    Add RB6 L-Bracket For Buckle Side $2.50ea
    Add MH8 Mounting Kit For Buckle Side RB6 L-Bracket $1.25ea
    Add 206K Retrofit Mounting Kit $21.75ea

    Add ADJ3B Black Stop Button (Not Installed) $2.50ea
    Add ADJ3G Grey Stop Button (Not Installed) $2.50ea
    Add ADJ3T Tan Stop Button (Not Installed) $2.50ea
    Add BZ1-1B Black Deck Or Trim Panel Bezel $10.00ea
    Add BZ1-1T Tan Deck Or Trim Panel Bezel $10.00ea

    Product Notes:Click On Picture To Enlarge
  • Unless indicated all of the plastic pieces are black.
  • 200K mounting kit includes 7/16 bolts, washers, nuts, reinforcing washers and L-bracket.
  • A 206K retrofit kit should be used when seat belts were not previously installed.
  • Retrofit kit include shoulder harness and underbody reinforcement plates, L-bracket(s) and mounting hardware.
  • 200K mounting kit is not required when purchasing a retrofit kit.
  • A stop button keeps the latch from sliding down the webbing when seat belt is not in use.
  • Lengths listed are approximate.
  • Click To View Matching Non Retractable Seat Belts
    For product questions or ordering assistance call (302)629-8508.






  • Lap Belt With Shoulder Harness With
    -2 1/2" Door Post Extension-

    Quantity

    **After the color indicates all of the plastic pieces are color matched to webbing.

    Click Here To View Webbing Colors Or To Order Webbing Samples

    Add 300K Mounting Kit $5.25ea
    Add RB6 L-Bracket For Buckle Side $2.50ea
    Add MH8 Mounting Kit For Buckle Side RB6 L-Bracket $1.25ea
    Add 302K Retrofit Mounting Kit For Bucket Seat $25.75ea
    Add 303K Retrofit Mounting Kit For Bench Seat $22.50ea

    Add ADJ3B Black Stop Button (Not Installed) $2.50ea
    Add ADJ3G Grey Stop Button (Not Installed) $2.50ea
    Add ADJ3T Tan Stop Button( Not Installed) $2.50ea
    Add BZ1-1B Black Deck Or Trim Panel Bezel $10.00ea
    Add BZ1-1T Tan Deck Or Trim Panel Bezel $10.00ea

    Product Notes:Click On Picture To Enlarge.
  • Unless indicated all the plastic pieces are black.
  • 300K mounting kit includes 7/16 bolts, washers, nuts, reinforcing washers and L-bracket.
  • A 302K or 303K retrofit kit should be used when seat belts were not previously installed.
  • Retrofit kits include shoulder harness and underbody reinforcement plates,L-bracket(s) and hardware.
  • 300K mounting kit is not required when purchasing a retrofit kit.
  • A stop button keeps the latch from sliding down the webbing when seat belt is not in use.
  • Lengths listed are approximate.
  • Click To View Matching Non Retractable Seat Belts
    For product questions or ordering assistance call (302)629-8508.







  • Lap Belt With Shoulder Harness With
    -8 1/2" Door Post Extension-

    Quantity

    Click Here To View Webbing Colors Or To Order Webbing Samples

    Add 300K Mounting Kit $5.25ea
    Add RB6 L-Bracket For Buckle Side $2.50ea
    Add MH8 Mounting Kit For Buckle Side RB6 L-Bracket $1.25ea
    Add 302K Retrofit Mounting Kit For Bucket Seat $25.75ea
    Add 303K Retrofit Mounting Kit For Bench Seat $22.50ea

    Add ADJ3B Black Stop Button (Not Installed) $2.50ea
    Add ADJ3G Grey Stop Button (Not Installed) $2.50ea
    Add ADJ3T Tan Stop Button (Not Installed) $2.50ea
    Add BZ1-1B Black Deck Or Trim Panel Bezel $10.00ea
    Add BZ1-1T Tan Deck Or Trim Panel Bezel $10.00ea

    Product Notes:Click On Picture To Enlarge.
  • All of the plastic pieces are black.
  • Contact us for extended lengths not listed
  • 300K mounting kit includes 7/16 bolts, washers, nuts, reinforcing washers and L-bracket.
  • A 302K or 303K retrofit kit should be used when seat belts were not previously installed.
  • Retrofit kits include shoulder harness and underbody reinforcement plates,L-bracket(s) and hardware.
  • 300K mounting kit is not required when purchasing a retrofit kit.
  • Lengths listed are approximate.
  • A stop button keeps the latch from sliding down the webbing when seat belt is not in use.
  • Click To View Matching Non Retractable Seat Belts
    For product questions or ordering assistance call (302)629-8508.


  • Dual Retractor Lap Seat Belt With Shoulder Harness






    Quantity
    *After the color indicates the retractor boot, harness retractor cover, buckle and buckle sleeve(if applicable) plus all plastic pieces can be ordered color matched to the webbing color.

    Click Here To View Webbing Colors Or To Order Webbing Samples

    Add (CMDR)Color Matched Components +$5.00
    Add 309K Mounting Kit $7.25ea
    Add RB6 L-Bracket For Buckle Side $2.50ea
    Add MH8 Mounting Kit For Buckle Side RB6 L-Bracket $1.25ea

    Add ADJ3B Black Stop Button (Not Installed) $2.50ea
    Add ADJ3G Grey Stop Button (Not Installed) $2.50ea
    Add ADJ3T Tan Stop Button (Not Installed) $2.50ea


    Product Notes: Click On Picture To Enlarge.
  • Sold Not Returnable
  • Unless color matched is available and ordered all boots and plastic pieces are black.
  • Can be used for a driver or passenger side installation.
  • A buckle end with a plastic sleeve in most cases is used in a vehicle with bucket seats.
  • A buckle end without a plastic sleeve in most cases is used in a vehicle with a bench seat.
  • The webbing fully extended from the lap seat belt retractor measures 58".
  • The webbing fully extended from the shoulder harness retractor measures 106".
  • The lap belt retractor is an (ALR) automatic locking type.
  • The shoulder harness retractor is an (ELR) emergengency locking type.
  • A stop button keeps the latch from sliding down the webbing when seat belt is not in use.
  • For suggestions regarding the creation or reinforcement of the mounting points refer to the Help Page.
  • Lengths listed are approximate.
  • Click To View Matching Non Retractable Seat Belts
    For product questions or ordering assistance call (302)629-8508.



  • Mounting Brackets

    Quantity:
    Add MH2-YZ Mounting Kit(Yellow Zinc). $3.25ea
    Add MH4 Mounting Kit(Zinc Chromate). $5.00ea


    Product Notes: Blick On Picture To Enlarge
  • RB6: 1 1/2" long L-bracket. Yellow zinc.
  • RB2: 2" long L-bracket. Yellow zinc.
  • RB9: 5" long double angle bracket. Yellow zinc.
  • RB8L: 7" long single left angle bracket. Yellow zinc.
  • RB8R: 7" long single right angle bracket. Yellow zinc.
  • RB7: 3" long flat extension. Yellow zinc.
  • RB11: 6" long flat extension. Yellow zinc.
  • RB10: 12" long single angle bracket. Yellow zinc.
  • Lengths listed are approximate.
    For product questions or ordering assistance call (302)629-8508.

  • Reinforcement Plates

    Quantity:
    Add MH11 Zinc Chromate Bolt $1.00ea
    Add MH12 Zinc Chromate Lock Washer $.35ea

    Product Notes: Click On Picture To Enlarge
  • RB1-1: Curved steel with attached weldnut. Measures 4 1/2" x 3".
  • RB1: same as RB1-1 except pair.
  • RB3: Steel with attached weldnut. Measures 4 1/2"(not including tip) x 1 1/2".
  • RB4: Measures 3" x 1 1/2". Accepts a 7/16th fine thread bolt.
  • Lengths listed are approximate.
    For product questions or ordering assistance call (302)629-8508.

  • Liability Disclaimer: The Andover Companies, and its subsidiaries assumes no responsibility for any damage due to the installation, either proper or improper, or for any damage or bodily injury arising from the use of any product. It is understood that the purchaser, installer and/or end user is responsible for the determination that the product purchased is suitable for its intended use and agrees to indemnify and hold The Andover Companies,Inc and its subsidiaries, harmless for any claim, action or demand arising from the installation and/or use of any product. There are no guarantees or warrantees on any product, implied or expressed, of fitness for a particular use with any such warrantees being specifically and expressly disclaimed. In the event any of the above limitations are held not enforceable our liability shall not exceed an amount equal to the amount paid to us for the product. Receipt of product or products confirm acceptance of disclaimer and liability transfer to purchaser, installer and/or end user.

    All information detailed within this document is based on information believed to be accurate but accuracy is not guaranteed. All pictures, diagrams and item descriptions are protected property of The Andover Companies,Inc and are not to be duplicated in any manner without written permission.

    (AR7-1 3-27-15)