On Sale Return To Seat Belt Main Index Page Individual Components,Hardware And Webbing
Build Your Own Contact Us:EMail Call Us:(302) 629-8508


Aviator lift lid buckle non retractable lap seat belts with chrome lid and rectangular center cut out chrome latch that are manufactured or assembled in the USA with USA certification tag confirming compliance with current FMVSS(Federal Motor Vehicle Safety Standards) 209 and 302. Aavailable anchor end fittings include bright chrome fixed that bolt directly to the floor and snap hooks that attach to a floor mounted eyebolt. These classic car seat belts are available with 3 panel, 4 panel and 7 panel webbing in colors to match most aftermarket and original interiors.

The seat belts and not implied to be vehicle or application specific. No guarantee is made as to fit or if a webbing color or webbing panel configuration will match an existing seat belt or if the webbing color will match an interior or interior compontant color.

Click Here for vehicle specific seat belts, non automotive seat belts and seatbelts for specialty applications.

With Direct To Floor End Fittings



With 7 Panel Webbing


7 panel polypropylene blend webbing is manufactured in large quantities making it currently the most commonly used automotive webbing.
Quantity

Click Here To View Webbing Colors Or To Order Webbing Samples

Add MH4 Mounting Kit. Per Seat Belt $5.25ea
Add 201K Retrofit Mounting Kit. Per Seat belt $12.00ea
Add 80296 Chrome "Roll-A-Belt" Clip-On Webbing Retractor $20.00ea

Product Notes: Click On Picture To Enlarge
  • Length 60": Adjustable buckle side 36". Fixed side 24".
  • Length 74": Adjustable buckle side 40". Fixed side 34".
  • Lengths listed are approximate.
  • End fittings are bright chrome flat with 1/2" mounting bolt hole.
  • MH4 mounting kit includes bolts,washers,nuts and reinforcing washers.
  • A retrofit kit which includes underbody reinforcing plates to add support to the mounting points should be used when seat belts were not previously installed.
  • MH4 mounting kit not required when ordering a retrofit kit.
  • For product questions or ordering assistance call (302)629-8508.



  • With 4 Panel Webbing


    4 panel webbing is manufactured to feel and look like early production seat belt webbing and is softer and more flexible than the more commonly used 7 panel webbing. Produced in a limited number of colors and in limited quantities.
    Quantity

    Click Here To View Webbing Colors Or To Order Webbing Samples

    Add MH4 Mounting Kit $5.25ea. Per Seat Belt
    Add 201K Retrofit Mounting Kit. Per Seat Belt $12.00ea
    Add 80296 Chrome "Roll-A-Belt" Clip-On Webbing Retractor $20.00ea

    Product Notes: Click On Picture To Enlarge
  • Length 60": Adjustable buckle side 36". Fixed side 24".
  • Length 74": Adjustable buckle side 40". Fixed side 34".
  • Lengths listed are approximate.
  • End fittings are bright chrome flat with 1/2" mounting bolt hole.
  • MH4 mounting kit includes bolts,washers,nuts and reinforcing washers
  • A retrofit kit which includes underbody reinforcing plates to add support to the mounting points should be used when seat belts were not previously installed.
  • MH4 mounting kit not required when ordering a retrofit kit.
  • For product questions or ordering assistance call (302)629-8508.



  • With 3 Panel Webbing


    3 panel webbing is manufactured to feel and look like early production seat belt webbing and is softer and more flexible than the more commonly used 7 panel webbing. Produced in a limited number of colors and in limited quantities.
    Quantity

    Click Here To View Webbing Colors Or To Order Webbing Samples

    Add MH4 Mounting Kit. Per Seat Belt $5.25ea
    Add 201K Retrofit Mounting Kit. Per Seat Belt $12.00ea
    Add 80296 Chrome "Roll-A Belt" Clip-On Webbing Retractor $20.00ea

    Product Notes: Click On Picture To Enlarge
  • Length 60": Adjustable side 36". Buckle side 24".
  • Length 74": Adjustable side 40". Buckle side 34".
  • Lengths listed are approximate.
  • End fittings are bright chrome flat with 1/2" mounting bolt hole.
  • MH4 mounting kit includes bolts,washers,nuts and reinforcing washers
  • A retrofit kit which includes underbody reinforcing plates to add support to the mounting points should be used when seat belts were not previously installed.
  • MH4 mounting kit not required when ordering a retrofit kit.
    For product questions or ordering assistance call (302)629-8508.

  • With Snap Hook To Eyebolt End Fittings



    With 7 Panel Webbing


    7 panel polypropylene blend webbing is manufactured in large quantities making it currently the most commonly used automotive webbing.
    Quantity

    Click Here To View Webbing Colors Or To Order Webbing Samples

    Add MH3 Mounting Kit. Per Seat Belt $8.25ea
    Add 205K Retrofit Mounting Kit. Per Seat Belt $14.00ea
    Add 80296 Chrome "Roll-A-Belt" Clip-On Webbing Retractor $20.00ea

    Product Notes: Click On Picture To Enlarge
  • Length 60": Adjustable buckle side 36".Fixed side 24".
  • Lenght 74": Adjustable buckle side 40".Fixed side 34".
  • Lengths listed are approximate.
  • MH3 mounting kit includes eyebolts, washers, nuts and reinfrocing washers.
  • End fittings are snap hooks which attach to floor mounted eyebolt. Not guaranteed to attach to existing eyebolt.
  • A retrofit kit which includes underbody reinforcing plates to add support to the mounting points should be used when seat belts were not previously installed.
  • MH3 mounting kit not required when ordering a retrofit kit.
  • For product questions or ordering assistance call (302)629-8508.



  • With 4 Panel Webbing


    4 panel webbing is manufactured to feel and look like early production seat belt webbing and is softer and more flexible than the more commonly used 7 panel webbing. Produced in a limited number of colors and in limited quantities.
    Quantity

    Click Here To View Webbing Colors Or To Order Webbing Samples

    Add MH3 Mounting Kit. Per Seat Belt $8.25ea
    Add 205K Retrofit Mounting Kit. Per Seat belt $14.00ea
    Add 80296 Chrome "Roll-A-Belt" Clip-On Webbing Retractor $20.00ea

    Product Notes: Click On Picture To Enlarge
  • Length 60": Adjustable buckle side 36".Fixed side 24".
  • Lenght 74": Adjustable buckle side 40".Fixed side 34".
  • Lengths listed are approximate.
  • MH3 mounting kit includes eyebolts, washers, nuts and reinfrocing washers.
  • End fittings are snap hooks. Attachs to floor mounted eyebolt. Not guaranteed to attach to an existing eyebolt.
  • A retrofit kit which includes underbody reinforcing plates to add support to the mounting points should be used when seat belts were not previously installed.
  • MH3 mounting kit not required when ordering a retrofit kit.
  • For product questions or ordering assistance call (302)629-8508.



  • With 3 Panel Webbing


    3 panel webbing is manufactured to feel and look like early production seat belt webbing and is softer and more flexible than the more commonly used 7 panel webbing. Produced in a limited number of colors and in limited quantities.
    Quantity

    Click Here To View Webbing Colors Or To Order Webbing Samples

    Add MH3 Mounting Kit. Per Seat Belt $8.25ea
    Add 205K Retrofit Mounting Kit. Per Seat Belt $14.00ea
    Add 80296 Chrome "Roll-A Belt" Clip-On Webbing Retractor $20.00ea

    Product Notes: Click On Picture To Enlarge
  • Length 60": Adjustable side 36". Buckle side 24".
  • Length 74": Adjustable side 40". Buckle side 34".
  • Lengths listed are approximate.
  • MH3 mounting kit includes eyebolts, washers, nuts and reinfrocing washers.
  • End fittings are snap hook. Attachs to floor mounted eyebolt. Not guaranteed to attach to an existing eyebolt.
  • A retrofit kit which includes underbody reinforcing plates to add support to the mounting points should be used when seat belts were not previously installed.
  • MH3 mounting kit not required when ordering a retrofit kit.
    For product questions or ordering assistance call (302)629-8508.

  • Related Hardware



    Specialty Mounting Brackets

    Quantity:

    Add MH2 Mounting Kit. Per Bracket. $3.75ea

    Product Notes: Click On Picture To Enlarge
  • RB6: 1 1/2" long L-bracket.
  • RB7: 3" long flat extension.
  • RB8-L: 7" long left angle bracket. 65 degree bend.
  • RB8-R: 7" long right angle bracket. 65 degree bend.
  • RB9: 5" long double angle bracket. Special order. Allow 14-21 days.
  • RB10: 12" long single angle bracket.Special order. Allow 14-21 days.
  • RB11: 6" long flat extension.
    For product questions or ordering assistance call (302)629-8508.
  • Reinforcement Plates

    Quantity:
    Add MH11 Seat Belt Mounting Bolt Per Plate $1.30ea
    Add MH1-13 Seat Belt Mounting Eyebolt Per Plate $3.25ea
    Add MH12 Lock Washer For Bolt/Eyebolt Per Plate $.35ea

    Product Notes: Click On Picture To Enlarge
  • RB1-1: Curved steel with weldnut. Measures 4 1/2" x 3".
  • RB1: Same as RB-1 except pair.
  • RB3: Steel with weldnut. Measures 4 1/2"(not including tip) x 1 1/2".
  • RB4: Measures 3" x 1 1/2".
  • MH1-13 Eyebolt:2 1/2" with 1 1/4" threaded. 5/8" eye 1/2" thick. Yellow zinc.
  • For product questions or ordering assistance call (302)629-8508.

  • Retractor, Clip On Webbing

    Quantity:

    Product Notes: Click On Picture To Enlarge
  • 80296 chrome "Roll-A-Belt". Barrell measures approximately 2 1/2".
  • Installation instructions included.
  • For product questions or ordering assistance call (302)629-8508.

  • On Sale Return To Seat Belt Main Index Page Individual Components,Hardware And Webbing
    Build Your Own Contact Us:EMail Call Us:(302) 629-8508


    Liability Disclaimer: The Andover Companies, and its subsidiaries assumes no responsibility for any damage due to the installation, either proper or improper, or for any damage or bodily injury arising from the use of any product. It is understood that the purchaser, installer and/or end user is responsible for the determination that the product purchased is suitable for its intended use and agrees to indemnify and hold The Andover Companies,Inc and its subsidiaries, harmless for any claim, action or demand arising from the installation and/or use of any product. There are no guarantees or warrantees on any product, implied or expressed, of fitness for a particular use with any such warrantees being specifically and expressly disclaimed. In the event any of the above limitations are held not enforceable our liability shall not exceed an amount equal to the amount paid to us for the product. Receipt of product or products confirm acceptance of disclaimer and liability transfer to purchaser, installer and/or end user.

    All information detailed within this document is based on information believed to be accurate but accuracy is not guaranteed. All pictures, diagrams and item descriptions are protected property of The Andover Companies,Inc and are not to be duplicated in any manner without written permission.

    (AR6 1-27-17)