On Sale Main Index Page Matching Non Retractable Lap Belts Matching Retractable Lap Belts
Individual Components,Hardware And Webbing Contact Us:EMail Call Us:(302) 629-8508

1950-60's vintage lift lid release retractable lap seat belts with attached shoulder harness with all metal bright chrome buckle with bright chrome lid with webbing colors to match most original and aftermarket American and imported automobile and truck interiors. The seat belts listed are not implied to be vehicle or application specific. No guarantee is made as to fit or a webbing or component color will match an existing seat belt webbing or interior color. Click Here for vehicle specific seat belts, non automotive seat belts and seatbelts for specialty applications.

All seat belts and hardware are new with all seat belts manufactured or assembled in the USA with USA certification tag confirming compliance with current FMVSS(Federal Motor Vehicle Safety Standards) 209 and 302.





With 2" Door Post Extension

Most installations use a 2" door post extension(DPE) which lowers the webbing approximately 1 3/8" from the mounting point.
Quantity

Click Here To View Available Webbing Colors Or To Order Webbing Samples

Add 300K Standard Mounting Kit. L-Bracket For Buckle Side Not Included. $5.25ea
Add 303K Retrofit Mounting Kit. L-Bracket For Buckle Side Not Included. $22.50ea
Add 302K Retrofit Mounting Kit. L-Bracket Retractor And Buckle Side Included. $25.75ea
Add MH5 Additional L-Bracket With Hardware Kit For Buckle Side $2.75ea

Add ADJ3B Black Latch Stop Button $2.50ea
Add BZ1-1B Black Deck Or Trim Panel Bezel $10.00ea
Add BZ1-1T Tan Deck Or Trim Panel Bezel $10.00ea



Product Notes: Click On Picture To Enlarge
  • Available with any webbing color listed on Sample Page.
  • Contact us to order a custom length, without a DPE bracket or in a color not listed.
  • Can be used for driver or passenger side installation.
  • The webbing fully extended from retractor measures approximately 140" long.
  • Buckle sides include a 20" non sleeved for bench seat and 12" sleeved for bucket seat.
  • A latch stop button keeps the latch from sliding down the webbing when seat belt is not in use.
  • The retractor is web sensitive emergency locking(ELR) which allows for movement and locks on sudden webbing movement.
  • 300K standard mounting kit includes bolts, washers, nuts, oversize reinforcing washers and retractor L-bracket.
  • An additional L-bracket may be required for the buckle side depending on the mounting location.
  • A retrofit kit which includes underbody reinforcing plates to add support to mounting points should be used when seat belts were not previously installed.
  • When a retrofit mounting kit is used a 300K standard mounting kit is not required.
  • Click here For Matching Non Retractable Lap Belts for front center or rear seat installations.
    For product questions or ordering assistance call (302)629-8508




  • With 8" Door Post Extension

    A 8" door post extension(DPE) lowers the webbing approximately 7 1/2" from the mounting point.
    Quantity

    Click Here To View Available Webbing Colors Or To Order Webbing Samples

    Add 300K Standard Mounting Kit. L-Bracket For Buckle Side Not Included. $5.25ea
    Add 303K Retrofit Mounting Kit. L-Bracket For Buckle Side Not Included. $22.50ea
    Add 302K Retrofit Mounting Kit. L-Bracket Retractor And Buckle Side Included. $25.75ea
    Add MH5 Additional L-Bracket With Hardware Kit For Buckle Side $2.75ea

    Add ADJ3B Black Latch Stop Button $2.50ea
    Add BZ1-1B Black Deck Or Trim Panel Bezel $10.00ea
    Add BZ1-1T Tan Deck Or Trim Panel Bezel $10.00ea



    Product Notes: Click On Picture To Enlarge
  • Available with any webbing color listed on Sample Page.
  • Contact us to order custom length, without a door post extension or webbing color not listed.
  • Can be used for driver or passenger side installation.
  • The webbing fully extended from retractor measures approximately 140" long.
  • Buckle sides include a 20" non sleeved for bench seat and 12" sleeved for bucket seat.
  • A latch stop button keeps the latch from sliding down the webbing when seat belt is not in use.
  • The retractor is web sensitive emergency locking(ELR) which allows for movement and locks on sudden webbing movement.
  • 300K standard mounting kit includes bolts, washers, nuts, oversize reinforcing washers and retractor L-bracket.
  • An additional L-bracket may be required for the buckle side depending on the mounting location.
  • A retrofit kit which includes underbody reinforcing plates to add support to mounting points should be used when seat belts were not previously installed.
  • When a retrofit mounting kit is used a 300K standard mounting kit is not required.
  • Click here For Matching Non Retractable Lap Belts for front center or rear seat installations.
    For product questions or ordering assistance call (302)629-8508


  • Specialty Mounting Brackets

    Quantity:
    Add MH2 Mounting Kit Per bracket. $3.75ea

    Product Notes: Click On Picture To Enlarge.
  • RB2: 2" long L-bracket.
  • RB6: 1 1/2" long L-bracket.
  • RB7: 3" long flat extension..
  • RB8-L: 7" long left angle bracket. 65 degree bend.
  • RB8-R: 7" long right angle bracket. 65 degree bend.
  • RB9: 5" long double angle bracket. Special Order.Allow 14-21 days.
  • RB10: 12" long angle bracket. Special Order.Allow 14-21 days.
  • RB11: 6" long flat extension.
  • Lengths are approximate.
  • For product questions or ordering assistance call (302)629-8508.


  • Reinforcement Plates

    Quantity:
    Add MH11 Mounting Bolt Per Plate $1.30ea
    Add MH12 Lock Washer Per Plate $.35ea

    Product Notes: Click On Picture To Enlarge.
  • RB1-1: Curved steel with attached weldnut. Measures 4 1/2" x 3".
  • RB1: Same as RB-1 except pair.
  • RB3: Steel with attached weldnut. Measures 4 1/2"(not including tip) x 1 1/2".
  • RB4: Threaded. Accepts 7/16th fine thread bolt. Measures 3" x 1 1/2".
  • Lengths are approximate.
  • For product questions or ordering assistance call (302)629-8508.

  • On Sale Contact Us:EMail Call Us:(302)629-8508


    Liability Disclaimer: The Andover Companies, and its subsidiaries assumes no responsibility for any damage due to the installation, either proper or improper, or for any damage or bodily injury arising from the use of any product. It is understood that the purchaser, installer and/or end user is responsible for the determination that the product purchased is suitable for its intended use and agrees to indemnify and hold The Andover Companies,Inc and its subsidiaries, harmless for any claim, action or demand arising from the installation and/or use of any product. There are no guarantees or warrantees on any product, implied or expressed, of fitness for a particular use with any such warrantees being specifically and expressly disclaimed. In the event any of the above limitations are held not enforceable our liability shall not exceed an amount equal to the amount paid to us for the product. Receipt of product or products confirm acceptance of disclaimer and liability transfer to purchaser, installer and/or end user.

    All information detailed within this document is based on information believed to be accurate but accuracy is not guaranteed. All pictures, diagrams and item descriptions are protected property of The Andover Companies,Inc and are not to be duplicated in any manner without written permission.

    (AR5-3 6-28-17)