On Sale Matching Non Retractable Lap Belts Matching Retractable Lap Belts With Shoulder Harness
Individual Components, Hardware And Webbing Seat Melt Main Index Page Contact Us:EMail Call Us:(302) 629-8508


Retractable Lap Seat Belts

1950-60's vintage lift lid release retractable lap seat belts with all metal bright chrome buckle with bright chrome lid available with a 4" or 7" long retractor boot with webbing colors to match most original and aftermarket American and imported automobile and truck interiors. The seat belts listed are not implied to be vehicle or application specific. No guarantee is made as to fit or a webbing or component color will match an existing seat belt webbing or interior color. Click Here for vehicle specific seat belts, non automotive seat belts and seatbelts for specialty applications.

All seat belts and hardware are new with all seat belts manufactured or assembled in the USA with USA certification tag confirming compliance with current FMVSS(Federal Motor Vehicle Safety Standards) 209 and 302.



With 4" Long Retractor Boot

Quantity:

Add 200K Standard Mounting Kit.L-Bracket For Buckle Side Not Included $4.25ea
Add 202K Bucket Seat Retrofit Kit. L-Bracket For Retractor And Buckle Side Included. $16.25ea
Add 204K Bench Seat Retrofit Kit.L-Bracket For Buckle Side Not Included $13.75ea
Add MH5 Additional L-Bracket With Hardware Kit For Buckle Side. $2.75ea


Product Notes: Click On Picture To Enlarge
  • Available in black only. Can be used for driver or passenger.
  • A sleeved buckle side in most cases is used in a vehicle with bucket seats.
  • A non sleeved buckle side in most cases is used in a vehicle with bench seats.
  • The webbing fully extended from the retractor measures 52" long.
  • The retractor is automatic locking(ALR) which locks once webbing has been pulled and released. To adjust webbing length once locked the webbing must be released back to the retractor and re-pulled.
  • 200K standard mounting kit includes 7/16-20 bolts, washers, nuts, oversize reinforcing washers and retractor L-bracket.
  • Retrofit kit which includes underbody reinforcement plates, L-bracket(s) and mounting hardware should be used when seat belts were not previously installed.
  • 200K standard mounting kit not is not required when purchasing a retrofit kit.
  • Click Here For Matching Non Retractable Lap Belts
  • Click here For Matching Retractable Lap Belts With Shoulder Harness
    For product questions or ordering assistance call (302)629-8508.



  • With 7" Long Retractor Boot

    Quantity:

    **After webbing color indicates sleeved buckle side and retractor boot are available color matched to the webbing color.

    Click Here To View Webbing Colors Or To Order Webbing Samples.

    Add (CMBS)Color Matched 12" Buckle Sleeve +$1.75ea
    Add (CM7B)Color Matched Retractor Boot +$2.50ea

    Add 200K Standard Mounting Kit.L-Bracket For Buckle Side Not Included $4.25ea
    Add 202K Bucket Seat Retrofit. L-Bracket For Retractor And Buckle Side Included. $16.25ea
    Add 204K Bench Seat Retrofit Kit.L-Bracket For Buckle Side Not Included $13.75ea
    Add MH5 Additional L-Bracket With Hardware Kit For Buckle Side. $2.75ea


    Product Notes:Click On Picture To Enlarge.
  • Can be used for driver or passenger.
  • The retractor boot and buckle sleeve are black unless color matched is available and ordered.
  • A sleeved buckle side in most cases is used in a vehicle with bucket seats.
  • A non sleeved buckle side in most cases is used in a vehicle with bench seats.
  • The webbing fully extended from the retractor measures 52" long.
  • The retractor is automatic locking(ALR) which locks once the webbing has been pulled and released. To adjust webbing length once locked the webbing must be released back to the retractor and re-pulled.
  • 200K standard mounting kit includes 7/16-20 bolts, washers, nuts, oversize reinforcing washers plus retractor L-bracket.
  • Retrofit kit which include underbody reinforcement plates should be used when seat belts were not previously installed.
  • 200K standard mounting kit not is not required when purchasing a retrofit kit.
  • Click Here For Matching Non Retractable Lap Belts
  • Click here For Matching Retractable Lap Belts With Shoulder Harness
    For product questions or ordering assistance call (302)629-8508.


  • Specialty Mounting Brackets

    Quantity:
    Add MH2 Mounting Kit. $3.75ea

    Product Notes: Click On Picture To Enlarge
  • RB6: 1 1/2" long L-bracket. Yellow zinc.
  • RB2: 2" long L-bracket. Yellow zinc.
  • RB7: 3" long flat extension. Yellow zinc.
  • RB8-L: 7" long left angle bracket. 65 degree bend.
  • RB8-R: 7" long right angle bracket. 65 degree bend.
  • RB9: 5" long double angle bracket. Yellow zinc.Special order. Allow 14-21 days.
  • RB10: 12" long single angle bracket. Yellow zinc.Special order. Allow 14-21 days.
  • RB11: 6" long flat extension. Yellow zinc.
  • Lengths listed are approximate.
    For product questions or ordering assistance call (302)629-8508.
  • Reinforcement Plates

    Quantity:
    Add MH11 Zinc Chromate Mounting Bolt $1.30ea
    Add MH12 Zinc Chromate Lock Washer $.35ea

    Product Notes: Click On Picture To Enlarge
  • RB1-1: Curved steel with attached weldnut. Measures 4 1/2" x 3".
  • RB1: Same as RB1-1 except pair.
  • RB3: Steel with attached weldnut. Measures 4 1/2"(not including tip) x 1 1/2".
  • RB4: Measures 3" x 1 1/2". Accepts a 7/16th fine thread bolt.
  • Lengths listed are approximate.
    For product questions or ordering assistance call (302)629-8508.


  • Liability Disclaimer: The Andover Companies, and its subsidiaries assumes no responsibility for any damage due to the installation, either proper or improper, or for any damage or bodily injury arising from the use of any product. It is understood that the purchaser, installer and/or end user is responsible for the determination that the product purchased is suitable for its intended use and agrees to indemnify and hold The Andover Companies,Inc and its subsidiaries, harmless for any claim, action or demand arising from the installation and/or use of any product. There are no guarantees or warrantees on any product, implied or expressed, of fitness for a particular use with any such warrantees being specifically and expressly disclaimed. In the event any of the above limitations are held not enforceable our liability shall not exceed an amount equal to the amount paid to us for the product. Receipt of product or products confirm acceptance of disclaimer and liability transfer to purchaser, installer and/or end user.

    All information detailed within this document is based on information believed to be accurate but accuracy is not guaranteed. All pictures, diagrams and item descriptions are protected property of The Andover Companies,Inc and are not to be duplicated in any manner without written permission.

    (AR5-2 6-27-17)