On Sale Return To Seat Belt Main Index Page Contact Us:EMail Call Us:(302) 629-8508
Matching Retractable Seat Belts Individual Components, Hardware And Webbing



Vintage 1950-60's style lift lid non retractable lap seat belts and non retractable lap seat belts with shoulder harness with an all metal buckle with a black hammertone(wrinkled) lid that are manufactured or assembled in the USA with USA certification tag confirming compliance with current FMVSS (Federal Motor Vehicle Safety Standards) 209 and 302. The floor attachment anchor end fitting options include chrome fixed or snap hooks. Webbing colors are offered to match most original and aftermarket interiors of most makes and models of American and imported automobiles and trucks.

The seat belts are not implied to be vehicle or application specific. No guarantee is made as to fit or if a webbing color will match an existing seat belt, interior component or interior color.

Click Here for vehicle specific seat belts, non automotive seat belts and seat belts for specialty applications.





With Direct To Floor Ends Fittings

Quantity

Click Here To View Webbing Colors Or To Order Samples

Add MH4 Mounting Kit. Per Seat Belt $5.25ea
Add 201K Retrofit Mounting Kit. Per Seat Belt $12.00ea
Add CR1 Black Clip-On Webbing Retractor $9.50ea
Add 80296 Roll-A-Belt Clip-On Webbing Retractor $20.00ea

Product Notes: Click On Picture To Enlarge
  • Buckle lid is black regardless of the webbing color.
  • End fitings are bright chrome flat with 1/2" mounting bolt hole.
  • Length 60": Adjustable buckle side 36". Fixed latch side 24".
  • Length 74": Adjustable buckle side 40". Fixed latch side 34".
  • Lengths are approximate.
  • MH4 mounting kit includes bolts,washers,nuts and reinforcing washers.
  • A retrofit kit which includes underbody reinforcing plates to add support to the mounting points should be used when seat belts were not previously installed.
  • MH4 mounting kit not required when ordering a retrofit kit.
    For product questions or ordering assistance call (302)629-8508.






  • With Snap Hook To Eyebolt End Fittings

    Quantity

    Click Here To View Webbing Colors Or To Order Samples

    Add MH3 Mounting Kit. Per Seat Belt $8.25ea
    Add 205K Retrofit Mounting Kit. Per Seat Belt $14.00ea
    Add CR1 Black Clip-On Webbing Retractor $9.50ea
    Add 80296 Roll-A-Belt Clip-On Webbing Retractor $20.00ea

    Product Notes: Click On Picture To Enlarge
  • Buckle lid is black regardless of the webbing color.
  • End fittings are snap hook. Attachs to floor eyebolt. Not guaranteed to attach to an existing eyebolt.
  • Length 60": Adjustable buckle side 36". Fixed latch side 24".
  • Length 74": Adjustable buckle side 40". Fixed latch side 34".
  • Lengths listed are approximate.
  • MH3 mounting kit includes eyebolts,washers,nuts and reinforcing washers.
  • A retrofit kit which includes underbody reinforcing plates to add support to the mounting points should be used when seat belts were not previously installed.
  • MH3 mounting kit not required when ordering a retrofit kit.
    For product questions or ordering assistance call (302)629-8508.
  • 3 Point Lap Seat Belt With Shoulder Harness




    Quantity

    Click Here To View Available Webbing Colors or Order Webbing Samples.

    Add MH9 Standard Mounting Kit $5.00ea
    Add 301K Retrofit Mounting Kit $21.50ea
    Add CR1 Plastic Clip-On Webbing Retractor $9.50ea
    Add 80296 Chrome "Roll-A-Belt" Clip-On Webbing Retractor $20.00ea

    Product Notes: Click On Picture To Enlarge
  • Buckle lid is black regardless of the webbing color.
  • Ajustable at the lap seat belt and shoulder harness.
  • Extended length of the combined lap seat belt latch side and shoulder harness strap measures 95" long.
  • Includes 20" adjustable buckle side.
  • Lengths are approximate.
  • MH9 standard mounting kit includes bolts, washers, nuts and reinforcing washers.
  • A retrofit kit which includes underbody reinforcing plates to add support to the mounting points should be used when seat belts were not previously installed.
  • MH9 standard mounting kit not required when ordering a retrofit kit.
    For product questions or ordering assistance call (302)629-8508.

  • Related Items



    Specialty Mounting Brackets

    Quantity:

    Add MH2 Mounting Kit. Per Bracket. $3.75ea

    Product Notes: Click On Picture To Enlarge
  • RB6: 1 1/2" long L-bracket.
  • RB7: 3" long flat extension.
  • RB8-L: 7" long left angle bracket. 65 degree bend..
  • RB8-R: 7" long right angle bracket. 65 degree bend.
  • RB9: 5" long double angle bracket. Special order. Allow 14-21 days.
  • RB10: 12" long single angle bracket.Special order. Allow 14-21 daays.
  • RB11: 6" long flat extension.
    For product questions or ordering assistance call (302)629-8508.


  • Reinforcement Plates

    Quantity:

    Add MH11 Seat Belt Mounting Bolt Per Plate $1.30ea
    Add MH1-13 Seat Belt Mounting Eyebolt Per Plate $3.25ea
    Add MH12 Lock Washer For Bolt or Eyebolt Per Plate $.35ea

    Product Notes: Click On Picture To Enlarge
  • RB1-1: Curved steel with attached weldnut. Measures 4 1/2" x 3".
  • RB1: Same as RB1 except pair for one seat belt.
  • RB3: Steel with attached weldnut. Measures 4 1/2"(not including tip) x 1 1/2".
  • RB4: Measures 3" x 1 1/2".
  • MH1-13 Eyebolt: 2 1/2" with 1 1/4" threaded. 5/8" eye 1/2" thick. Yellow zinc.
    For product questions or ordering assistance call (302)629-8508.


  • Retractors, Clip On Webbing

    Quantity:

    Product Notes: Click On Picture To Enlarge
  • CR1 black plastic retractor measures approximately 3" x 2 1/2".
  • 80296 chrome "Roll-A-Belt" center barrel measures approximately 2 1/2".
  • Installation instructions included.
    For product questions or ordering assistance call (302)629-8508.

  • On Sale Return To Seat Belt Main Index Page Build Your Own Contact Us:EMail Call Us:(302) 629-8508
    Matching Retractable Seat Belts Individual Components, Hardware And Webbing

    Liability Disclaimer: The Andover Companies, and its subsidiaries assumes no responsibility for any damage due to the installation, either proper or improper, or for any damage or bodily injury arising from the use of any product. It is understood that the purchaser, installer and/or end user is responsible for the determination that the product purchased is suitable for its intended use and agrees to indemnify and hold The Andover Companies,Inc and its subsidiaries, harmless for any claim, action or demand arising from the installation and/or use of any product. There are no guarantees or warrantees on any product, implied or expressed, of fitness for a particular use with any such warrantees being specifically and expressly disclaimed. In the event any of the above limitations are held not enforceable our liability shall not exceed an amount equal to the amount paid to us for the product. Receipt of product or products confirm acceptance of disclaimer and liability transfer to purchaser, installer and/or end user.

    All information detailed within this document is based on information believed to be accurate but accuracy is not guaranteed. All pictures, diagrams and item descriptions are protected property of The Andover Companies,Inc and are not to be duplicated in any manner without written permission.

    (AR14 9-17-17)