On Sale Seat Belt Index Page Contact Us:EMail Call Us:(302)629-8508
Hardware And Related More Buckle Choices Build Your Own

End release push button buckle seat belts available as a non retractable lap seat belt, non retractable lap seat belt with shoulder harness, retractable lap seat belt and retractable lap seat belt with a shoulder harness with webbing colors to match most American and imported automobile and truck original and aftermarket interiors. All of the seat belts and related hardware are new and manufactured to meet or exceed FMVSS (U.S. Federal Motor Vehicle Safety Standards) 209 and 302 with all of the seat belts manufactured or assembled in the USA.

The seat belts listed are an aftermarket universal fit and are not implied to be vehicle or application specific. No guarantee is made as to fit or if a component or webbing color will match an existing seat belt or interior color. Click Here for vehicle specific seat belts, non automotive seat belts and seatbelts for specialty applications.

Non Retractable Seat Belts

Lap Seat Belt

Quantity

Click Here To View Webbing Colors Or To Order Webbing Samples.

Add MH2-YZ Mounting Kit $3.25ea
Add 201K-Z Retrofit Mounting Kit $12.00ea

Product Notes: Click On Picture To Enlarge
  • Except for the buckle press area all of the plastic pieces are black.
  • Length 60": Adjustable side 40". Buckle side 20".
  • Length 75": Adjustable side 40". Buckle side 34".
  • Length 90": Adjustable side 45". Buckle side 45".
  • Lengths listed are approximate.
  • A retrofit mounting kit should be used when seat belts were not previously installed.
  • Retrofit kit includes underbody reinforcement plates and mounting hardware.
  • MH2-YZ mounting kit is not required when purchasing a retrofit kit.
    For Product Questions Or Ordering Assistance Call (302)629-8508
  • 3-Point Lap Seat Belt With Shoulder Harness

    Quantity

    Click Here To View Webbing Colors

    Add MH9 Mounting Kit $4.75ea
    Add 301K Retrofit Mounting Kit $20.00ea

    Product Notes: Click On Picture To Enlarge
  • Except for the buckle press area all of the plastic pieces are black.
  • The adjustable extended length without the buckle side measures 95" long.
  • The non adjustable buckle side measures 20" long.
  • Lengths listed are approximate.
  • MH9 mounting kit includes bolts, washers, nuts and reinforcing washers.
  • A retrofit kit should be used when seat belts were not previously installed.
  • 301K retrofit kit includes shoulder harness and underbody reinforcement plates and mounting hardware.
  • MH9 mounting kit is not required when ordering a retrofit kit.
    For Product Questions Or Ordering Assistance Call (302)629-8508.
  • Retractable Lap Seat Belts

    General Information
  • The seat belts listed can be used for driver or passenger side installation.
  • Seat belt warning or any dash electrical connectors are not included.
  • All of the seat belts, components, mounting kits and hardware are priced and sold each/per person.
  • The retractor is automatic locking(ALR) which locks when the webbing has been pulled and released.
  • To adjust the length once retractor has locked the webbing must be released back to the retractor and re-pulled.

    Buckle Side Selection
  • A buckle side with a plastic sleeve in most cases is used in a vehicle with bucket seats.
  • A buckle side without a plastic sleeve in most cases is used in a vehicle with bench seats.

    Mounting Hardware
  • Always use factory mounting points when possible.
  • Retrofit mounting kits should be used if the location where seat belts are being installed did not have seat belts previously installed.
  • Retrofit kits include underbody reinforcement plates to add support to the mounting points, L-bracket(s) to mount the retractor upright and mounting hardware.
  • When a retrofit mounting kit is purchased a basic or standard mounting kit is not required.
  • An additional L-bracket may be required based on the mounting location of the retractor or buckle side. See mounting brackets at the end of section.
  • For suggestions regarding the creation or reinforcement of the mounting points refer to the Help Page.


    Retractable Lap Seat Belt With 7" Retractor Boot

    Quantity


    Click Here To View Webbing Colors or To Order Webbing Samples

    Add 200K Mounting Kit $4.25ea
    Add RB6 L-Bracket For Buckle Side $2.50ea
    Add MH8 Mounting Kit For Buckle Side RB6 L-Bracket $1.25ea

    Add 202K Retrofit Mounting Kit For Bucket Seats $16.25ea
    Add 204K Retrofit Mounting Kit For Bench Seats $13.75ea

    Product Notes: Click On Picture To Enlarge
  • Except for the buckle press area all of the plastic pieces are black.
  • The webbing fully extended from retractor measures 54" Long.
  • 200K mounting kit includes bolts, washers, nuts, reinforcing washers and L-bracket.
  • A 202K or 204K retrofit should be used when seat belts were not previously installed.
  • Retrofit kits include underbody reinforcement plates and mounting hardware.
  • A 200K mounting kit is not required when purchasing a retrofit kit.
    For Product Questions Or Ordering Assistance Call (302)629-8508
  • Retractable Lap And Shoulder Harness Seat Belts

    General Information
  • The seat belts listed can be used for a drivers or passenger side installation.
  • All of the seat belts, components, mounting kits and hardware are priced and sold each/per person.
  • The retractor is emergency locking(ELR) with a web sensitive inertia reel that locks instantly on sudden webbing movement.
  • The seat belts listed are universal fit without electrical wiring and are not guaranteed to fit all applications.

    Buckle Side Selection
  • A buckle side with a plastic sleeve in most cases is used in a vehicle with bucket seats.
  • A buckle side without a plastic sleeve in most cases is used in a vehicle with bench seats.

    Shoulder Harness Configuration And Extended Lengths Selection
  • For assistance determining the extended length, door post extension type and or the creation of a shoulder harness mounting point refer to Help Page.

    Mounting Hardware Selection
  • Always use the factory mounting locations when possible.
  • Retrofit mounting kits should be used if the location where seat belts are being installed did not have seat belts previously installed.
  • Retrofit kits include underbody and shoulder harness reinforcement plates to add support to the mounting locations, retractor L-brackets to mount the retractor upright and mounting hardware.
  • When a retrofit mounting kit is purchased a basic or standard mounting kit is not required.
  • Some installations may require additional L-brackets or specialty brackets based on the mounting location of the retractor or buckle end. See mounting brackets at the end of section.




    Retractable Lap And Shoulder Harness
    Without Door Post Extension

    Quantity



    Click Here To View Webbing Colors or To Order Webbing Samples.

    Add 200K Mounting Kit $4.25ea
    Add RB6 L-Bracket For Buckle Side $2.50ea
    Add MH8 Mounting Kit For Buckle Side RB6 L-Bracket $1.25ea
    Add 206K Retrofit Mounting Kit $21.75ea

    Add ADJ3B Black Stop Button (Not Installed) $2.50ea
    Add ADJ3G Grey Stop Button (Not Installed) $2.50ea
    Add ADJ3T Tan Stop Button (Not Installed) $2.50ea
    Add BZ1-1B Black Deck Or Trim Panel Bezel $10.00ea
    Add BZ1-1T Tan Deck Or Trim Panel Bezel $10.00ea

    Product Notes: Click On Pcture To Enlarge
  • Except for the buckle press area all of the plastic pieces are black.
  • 200K mounting kit includes bolts, washers, nuts, reinforcing washers and L-bracket.
  • A 206K retrofit kit should be used when seat belts were not previously installed.
  • Retrofit kit includes shoulder harness and underbody reinforcement plates and mounting hardware.
  • 200K mounting kit is not required when purchasing a retrofit kit.
    For Product Questions Or Ordering Assistance Call (302)629-8508



  • Retractable Lap And Shoulder Harness
    With 2 1/2" Door Post Extension

    Quantity



    Click Here To View Webbing Colors Or To Order Webbing Samples

    Add 300K Mounting Kit $5.25ea
    Add RB6 L-Bracket For Buckle Side $2.50ea
    Add MH8 Mounting Kit For Buckle Side RB6 L-Bracket $1.25ea

    Add 302K Retrofit Mounting Kit For Bucket Seats $25.75ea
    Add 303K Retrofit Mounting Kit For Bench Seats $22.50ea

    Add ADJ3B Black Stop Button (Not Installed) $2.50ea
    Add ADJ3G Grey Stop Button (Not Installed) $2.50ea
    Add ADJ3T Tan Stop Button (Not Installed) $2.50ea
    Add BZ1-1B Black Deck Or Trim Panel Bezel $10.00ea
    Add BZ1-1T Tan Deck Or Trim Panel Bezel $10.00ea

    Product Notes: Click On Picture To Enlarge
  • Except for the buckle press area all of the plastic pieces are black.
  • 300K mounting kit includes bolts, washers, nuts, reinforcing washers and L-bracket.
  • 302K or 303K retrofit kit should be used when seat belts were not previously installed.
  • Retrofit kits includes shoulder harness and underbody reinforcement plates and mounting hardware.
  • 300K mounting kit is not required when purchasing a retrofit kit.
    For Product Questions Or Ordering Assistance Call (302)629-8508



  • Retractable Lap And Shoulder Harness
    With 8 1/2" Door Post Extension

    Quantity



    Click Here To View Webbing Colors Or To Order Webbing Samples

    Add 300K Mounting Kit $5.25ea
    Add RB6 L-Bracket For Buckle Side $2.50ea
    Add MH8 Mounting Kit For Buckle Side RB6 L-Bracket $1.25ea

    Add 302K Retrofit Mounting Kit For Bucket Seats $25.75ea
    Add 303K Retrofit Mounting Kit For Bench Seats $22.50ea

    Add ADJ3B Black Stop Button (Not Installed) $2.50ea
    Add ADJ3G Grey Stop Button (Not Installed) $2.50ea
    Add ADJ3T Tan Stop Button (Not Installed) $2.50ea
    Add BZ1-1B Black Deck Or Trim Panel Bezel $10.00ea
    Add BZ1-1T Tan Deck Or Trim Panel Bezel $10.00ea

    Product Notes: Click On Picture To Enlarge
  • Except for the buckle press area all of the plastic pieces are black.
  • 300K mounting kit includes bolts, washers, nuts, reinforcing washers and L-bracket.
  • 302K or 303K retrofit kit should be used when seat belts were not previously installed.
  • Retrofit kits includes shoulder harness and underbody reinforcement plates and mounting hardware.
  • 300K mounting kit is not required when purchasing a retrofit kit.
    For Product Questions Or Ordering Assistance Call (302)629-8508


  • Specialty Mounting Brackets

    Quantity:
    Add MH2-YZ Mounting Kit $3.25ea

    Product Notes: Click On Picture To Enlarge
  • RB6: 1 1/2" long L-bracket. Yellow zinc.
  • RB2: 2" long L-bracket. Yellow zinc.
  • RB9: 5" long double angle bracket. Yellow zinc.
  • RB8-L: 7" long angle bracket. Angles to the left. Yellow zinc.
  • RB8-R: 7" long angle bracket. Angles to the right. Yellow zinc.
  • RB7: 3" long flat extension. Yellow zinc.
  • RB11: 6" long flat extension. Yellow zinc.
  • RB10: 12" long angle bracket. Yellow zinc.
    For Product Questions Or Ordering Assistance Call (302)629-8508
  • Reinforcement Plates

    Quantity:
    Add MH11 Zinc Chromate Mounting Bolt $1.30ea
    Add MH12 Zinc Chromate Lock Washer $.35ea

    Product Notes: Click On Picture To Enlarge
  • RB1-1: Curved steel with attached weldnut. Measures 4 1/2" x 3".
  • RB1: Same as RB1-1 except pair.
  • RB3: Steel with attached weldnut. Measures 4 1/2"(not including tip) x 1 1/2".
  • RB4: Measures 3" x 1 1/2". Accepts a 7/16th fine thread bolt.
    For Product Questions Or Ordering Assistance Call (302)629-8508


  • Liability Disclaimer: The Andover Companies, and its subsidiaries assumes no responsibility for any damage due to the installation, either proper or improper, or for any damage or bodily injury arising from the use of any product. It is understood that the purchaser, installer and/or end user is responsible for the determination that the product purchased is suitable for its intended use and agrees to indemnify and hold The Andover Companies,Inc and its subsidiaries, harmless for any claim, action or demand arising from the installation and/or use of any product. There are no guarantees or warrantees on any product, implied or expressed, of fitness for a particular use with any such warrantees being specifically and expressly disclaimed. In the event any of the above limitations are held not enforceable our liability shall not exceed an amount equal to the amount paid to us for the product. Receipt of product or products confirm acceptance of disclaimer and liability transfer to purchaser, installer and/or end user.

    All information detailed within this document is based on information believed to be accurate but accuracy is not guaranteed. All pictures, diagrams and item descriptions are protected property of The Andover Companies,Inc and are not to be duplicated in any manner without written permission.

    (AR12 5-25-15)