On Sale Contact Us:EMail Call Us:(302) 629-8508
Seat Belt Main Index Components And Hardware Custom Made

Dual Retractor Lap With Shoulder Harness Seat Belts

Dual retractor seat belts with an independent lap seat belt and shoulder harness retractor available with a vintage chrome lift lid buckle, vintage black hammertone lift lid buckle, standard plastic capped push button buckle and deluxe all metal push button buckle with webbing colors to match most aftermarket and original interiors for most makes and models of American and imported automobiles and trucks. Also listed are matching non retractable lap seat belts in extended lengths of 60", 74" and 90". All of the seat belts and related hardware are new and manufactured to meet or exceed FMVSS (U.S. Federal Motor Vehicle Safety Standards) 209 and 302 with all of the seat belts manufactured or assembled in the USA.

The seat belts listed are an aftermarket universal fit and are not implied to be vehicle or application specific. No guarantee is made as to fit or if a component or webbing color will match an existing seat belt or interior color. Sold not returnable. Click Here for vehicle specific seat belts, non automotive seat belts and seatbelts for specialty applications.



With Standard Push Button Buckle

Quantity

Click Here To View Webbing Colors
*After the color indicates that the lower retractor boot, shoulder harness retractor cover, buckle and buckle sleeve(if applicable) plus all plastic pieces can be ordered color matched to the webbing color.

Add (CMDR)Color Matched Components +$5.00
Upgrade To (108)Optional Buckle With Black Press Area Background $2.50ea
Add 309K Mounting Kit $7.25ea
Add RB6 L-Bracket For Buckle Side $2.50ea
Add MH8 Mounting Kit For Buckle Side RB6 L-Bracket $1.25ea

Add ADJ3B Black Stop Button (Not Installed) $2.50ea
Add ADJ3G Grey Stop Button (Not Installed) $2.50ea
Add ADJ3T Tan Stop Button (Not Installed) $2.50ea



Product Notes: Click On Picture To Enlarge.
  • Sold Not Returnable
  • Unless color matched is available and ordered all boots and plastic pieces are black.
  • Can be used for a driver or passenger side installation.
  • A buckle side with a plastic sleeve in most cases is used in a vehicle with bucket seats.
  • A buckle side without a plastic sleeve in most cases is used in a vehicle with bench seats.
  • The webbing fully extended from the lap belt retractor measures 58".
  • The webbing fully extended from the shoulder harness retractor measures 106".
  • Lengths listed are approximate.
  • The lap belt retractor is an (ALR) automatic locking type.
  • The shoulder harness retractor is an (ELR) emergency locking type.
  • A stop button keeps the latch from sliding down the webbing when seat belt is not in use.
  • See matching non retractable lap seat belts listed below.
  • Click To View Matching Retractable Seat Belts
  • For suggestions regarding the creation or reinforcement of the mounting points refer to the Help Page.
    For product questions or ordering assistance call (302)629-8508



  • With Deluxe All Metal Push Button Buckle

    Quantity

    Click Here To View Webbing Colors
    *After the color indicates the retractor boot, shoulder harness retractor cover, buckle and buckle sleeve(if applicable) plus all plastic pieces can be ordered color matched to the webbing color.

    Add (CMDR)Color Matched Components +$5.00

    Add 309K Mounting Kit $7.25ea
    Add RB6 L-Bracket For Buckle Side $2.50ea
    Add MH8 Mounting Kit For Buckle Side RB6 L-Bracket $1.25ea

    Add ADJ3B Black Stop Button (Not Installed) $2.50ea
    Add ADJ3G Grey Stop Button (Not Installed) $2.50ea
    Add ADJ3T Tan Stop Button (Not Installed) $2.50ea



    Product Notes: Click On Picture To Enlarge.
  • Sold Not Returnable
  • Unless color matched is available and ordered all boots and plastic pieces are black.
  • Can be used for a driver or passenger side installation.
  • A buckle side with a plastic sleeve in most cases is used in a vehicle with bucket seats.
  • A buckle side without a plastic sleeve in most cases is used in a vehicle with bench seats.
  • The webbing fully extended from the lap belt retractor measures 58".
  • The webbing fully extended from the shoulder harness retractor measures 106".
  • Lengths listed are approximate.
  • The lap belt retractor is an (ALR) automatic locking type.
  • The shoulder harness retractor is an (ELR) emergency locking type.
  • A stop button keeps the latch from sliding down the webbing when seat belt is not in use.
  • See matching non retractable lap seat belts listed below.
  • Click To View Matching Retractable Seat Belts
  • For suggestions regarding the creation or reinforcement of the mounting points refer to the Help Page.
    For product questions or ordering assistance call (302)629-8508.>


  • Matching Non Retractable Lap Seat Belts

    Quantity


    Click Here To View Webbing Colors
    *After the color indicates all plastic pices are color matched to the webbing.

    Upgrade To (108)Optional Buckle With Black Press Area Background $2.50ea
    Add MH2 Mounting Kit $2.50ea


    Product Notes: Click On Picture To Enlarge
  • *After the color indicates all plastic pices are color matched to the webbing.
  • Length 60": Adjustable side 40". Buckle side 20".
  • Length 74": Adjustable side 50". Buckle side 24".
  • Length 90": Adjustable side 45". Buckle side 45".
  • Lengths listed are approximate.
    For product questions or ordering assistance call (302)629-8508.


  • Specialty Mounting Brackets

    Quantity:
    Add MH2 Mounting Kit. $2.50ea


    Product Notes: Blick On Picture To Enlarge
  • RB6: 1 1/2" long L-bracket.Yellow zinc.
  • RB2: 2" long L-bracket.Yellow zinc.
  • RB9: 5" long double angle bracket.Yellow zinc.
  • RB8-L: 7" long left angle bracket. 65 degree bend.
  • RB8-R: 7" long right angle bracket. 65 degree bend.
  • RB7: 3" long flat extension.Yellow zinc.
  • RB11: 6" long flat extension.Yellow zinc.
  • RB10: 12" long single angle bracket.Yellow zinc.
  • Lengths listed are approximate.
    For product questions or ordering assistance call (302)629-8508.



  • Reinforcement Plates

    Quantity:
    Add MH11 Zinc Chromate Bolt $1.00ea
    Add MH12 Zinc Chromate Lock Washer $.35ea


    Product Notes: Click On Picture To Enlarge
  • RB1-1: Curved steel with attached weldnut. Measures 4 1/2" x 3".
  • RB1: same as RB1-1 except pair.
  • RB3: Steel with attached weldnut. Measures 4 1/2"(not including tip) x 1 1/2".
  • RB4: Measures 3" x 1 1/2". Accepts a 7/16th fine thread bolt.
  • Lengths listed are approximate.
    For product questions or ordering assistance call (302)629-8508.



  • Liability Disclaimer: The Andover Companies, and its subsidiaries assumes no responsibility for any damage due to the installation, either proper or improper, or for any damage or bodily injury arising from the use of any product. It is understood that the purchaser, installer and/or end user is responsible for the determination that the product purchased is suitable for its intended use and agrees to indemnify and hold The Andover Companies,Inc and its subsidiaries, harmless for any claim, action or demand arising from the installation and/or use of any product. There are no guarantees or warrantees on any product, implied or expressed, of fitness for a particular use with any such warrantees being specifically and expressly disclaimed. In the event any of the above limitations are held not enforceable our liability shall not exceed an amount equal to the amount paid to us for the product. Receipt of product or products confirm acceptance of disclaimer and liability transfer to purchaser, installer and/or end user.

    All information detailed within this document is based on information believed to be accurate but accuracy is not guaranteed. All pictures, diagrams and item descriptions are protected property of The Andover Companies,Inc and are not to be duplicated in any manner without written permission.

    (AR11 9-20-13)