On Sale Seat Belt Index Page Components And Hardware Build Your Own
Contact Us:EMail Call Us:(302) 629-8508
3 point non retractable lap seat belts with shoulder harness and 3 point Y harness non retractable lap seat belts with shoulder harnes available with an all metal push button buckle with a starburst logo on the press area, standard push button buckle with a red or black press area background with white "PRESS", vintage chrome lift latch buckle, vintage satin lift latch buckle, deluxe vintage black hammertone lift lid buckle and vintage lift lid buckle with a Bowtie insert with webbing colors to match most original and aftermarket interiors of most makes and models of American and imported automobiles and trucks. All of the seat belts and related hardware are new and manufactured to meet or exceed FMVSS (U.S. Federal Motor Vehicle Safety Standards) 209 and 302 with all of the seat belts manufactured or assembled in the USA.

The seat belts listed are an aftermarket universal fit and are not implied to be vehicle or application specific. No guarantee is made as to fit or if a component or webbing color will match an existing seat belt or interior color.Click Here for vehicle specific seat belts, non automotive seat belts and seatbelts for specialty applications.

3 Point Seat Belts With Vintage Lift Lid Buckle




With Fixed Anchor Ends

Quantity
**After the color indicates when ordering a W8808(20" non sleeved) series seat belt all plastic components can be ordered color matched to webbing color.
Unless color matched components are available and ordered all plastic pices are black.

Click Here To View Webbing Colors or Order Webbing Samples.

With Color Matched Components(W8808-Match Series) +$7.00ea
Upgrade Lap Anchor End Fittings From Yellow Zinc To Chrome +$2.50ea
Only available when ordering color matched components (W8808-Match Series)

Upgrade Buckle To (8387B) With Black Hammertone Lid +$10.00ea

Add MH9 Mounting Kit $4.75ea
Add 301K-Z Retrofit Mounting Kit $21.50ea
Add CR1 Plastic Clip-On Webbing Retractor $9.50ea
Add 80296 Chrome "Roll-A-Belt" Clip-On Webbing Retractor $20.00ea

Product Notes: Click On Picture To Enlarge
  • Also available with satin(8375) and Bowtie insert(8376) buckle. Call for information.
  • Length adjustment is on both the shoulder harness and lap belt.
  • Extended Combined length 115". 95" adjustable shoulder harness and 20" adjustable buckle side.
  • Lengths listed are approximate.
  • MH9 mounting kit includes bolts, washers, nuts and reinforcing washers.
  • A retrofit kit should be used when seat belts were not previously installed.
  • 301K-Z retrofit kit includes shoulder harness and underbody reinforcements and mounting hardware.
  • MH9 mounting kit is not required when ordering a retrofit kit.
  • Click Here To View Matching Non Retractable Seat Belts
  • Click Here To View Matching Retractable Seat Belts
    For product questions or ordering assistance call (302)629-8508.



  • With "Snap Hook" Anchor Ends

    Quantity
    **After the color indicates the plastic components are color matched to the webbing color.
    Unless indicated all plastic pieces are black.

    Click Here To View Webbing Colors or To Order Webbing Samples

    Upgrade Buckle To (8387B) With Black Hammertone Lid +$10.00ea

    Add MH10 Mounting Kit $9.25ea
    Add 304K Retrofit Mounting Kit $23.00ea
    Add CR1 Plastic Clip-On Webbing Retractor $9.50ea
    Add 80296 Chrome "Roll-A-Belt" Clip-On Webbing Retractor $20.00ea

    Click On Picture To Enlarge
  • The snap hooks are zinc chromate and are on lap belt portion only.
  • Length adjustment is on both the shoulder harness and lap belt.
  • Extended combined length 115". 95" adjustable shoulder harness and 20" adjustable buckle side.
  • Lengths listed are approximate.
  • MH10 mounting kit includes eyebolts, washers, nuts and reinforcing washers.
  • A retrofit kit should be used when seat belts were not previously installed.
  • 304K retrofit kit includes shoulder harness and underbody reinforcement plates and mounting hardware.
  • MH10 mounting kit is not required when ordering a retrofit kit.
  • Click Here To View Matching Non Retractable Seat Belts
  • Click Here To View Matching Retractable Seat Belts
    For product questions or ordering assistance call (302)629-8508.

  • "Custom Y" Harness

    Quantity
    **After the color indicates all components are color matched to webbing color.
    Unless indicated all plastic pieces are black.

    Click Here To View Webbing Colors or To Order Webbing Samples


    Upgrade To Buckle(8387B) With Black Hammertone Lid +$10.00ea

    Add MH9 Mounting Kit $4.75ea
    Add 305K Retrofit Mounting Kit $17.00ea

    Product Notes:(W8814 Series) Click On Picture To Enlarge
  • Length adjustment is on both the shoulder harness and lap belt.
  • The harness strap measures 84" from attachment to lap belt.
  • Adjustable lap belt portion measures 74" long.
  • Lengths listed are approximate.
  • MH9 mounting kit includes 7/16-20 bolts, washers,nuts and reinforcing washers.
  • A retrofit mounting kit should be used when seat belts were not previously installed.
  • 305K retrofit kit includes reinforcement plates and mounting mounting hardware.
  • MH9 mounting kit is not required when ordering a retrofit kit.
  • Not SFI racing certified.
  • Click Here To View Matching Non Retractable Seat Belts
  • Click Here To View Matching Retractable Seat Belts
    For product questions or ordering assistance call (302)629-8508.
  • 3 Point Seat Belts With Push Button Buckle


    With Standard Buckle With Globe Logo

    Quantity

    Add MH9 Mounting Kit $4.75ea
    Add 301K-Z Retrofit Mounting Kit $21.50ea

    Product Notes:(W8248 Series) Click On Picture To Enlarge
  • The adjustable extended length measures approximately 95" long.
  • The fixed buckle side measures approximately 20".
  • MH9 mounting kit includes 7/16-20 bolts, washers, nuts and reinforcing washers.
  • A retrofit kit should be used when seat belts were not previously installed.
  • 301K-Z retrofit kit includes shoulder harness and underbody reinforcement plates and mounting hardware.
  • MH9 mounting kit is not required when ordering a retrofit kit.
  • Click Here To View Matching Non Retractable Seat Belts
  • Click Here To View Matching Retractable Seat Belts
    For product questions or ordering assistance call (302)629-8508.




  • With Standard Press Or Deluxe Metal Buckle

    Quantity



    **After the color indicates all plastic components can be ordered color matched to webbing color.
    Unless color matched components are available and ordered all plastic pices are black.

    Click Here To View Webbing Colors Or To Order Webbing Samples

    With Color Matched Components +$7.00ea

    Add MH9 Mounting Kit $4.75ea
    Add 301K-Z Retrofit Mounting Kit $21.50ea

    Product Notes: Click On Picture To Enlarge
  • All plastic pieces are black regardless of webbing color ordered.
  • The extended adjustable length less the buckle side measures approximately 95" long.
  • MH9 mounting kit includes 7/16-20 bolts, washers, nuts and reinforcing washers.
  • A retrofit kit should be used when seat belts were not previously installed.
  • 301K-Z retrofit kit includes shoulder harness and underbody reinforcement plates and mounting hardware.
  • MH9 mounting kit is not required when ordering a retrofit kit.
  • Click Here To View Matching Non Retractable Seat Belts
  • Click Here To View Matching Retractable Seat Belts
    For product questions or ordering assistance call (302)629-8508.


  • Custom "Y" Harness

    Quantity

    Click Here To View Webbing Colors
    **After the color indicates the plastic components are color matched to webbing color.
    Unless indicated all plastic pieces are black.

    Add MH9 Mounting Kit $4.75ea
    Add 305K Retrofit Mounting Kit $17.00ea

    Product Notes: Click On Picture To Enlarge
  • Length adjustment is on both the shoulder harness and lap belt.
  • Shoulder harness strap measures 81" from attachment to lap belt.
  • Adjustable lap belt portion measures 70" long.
  • Lengths listed are approximate.
  • MH9 mounting kit includes 7/16-20 bolts, washers, nuts and reinforcing washers.
  • A retrofit kit should be used when seat belts were not previously installed.
  • 305K retrofit kit includes reinforcement plates and mounting hardware.
  • MH9 mounting kit is not required when ordering a retrofit kit.
  • Not SFI racing certified.
    For product questions or ordering assistance call (302)629-8508.
  • Specialty Mounting Brackets And Reinforcing Plates

    Mounting Brackets

    Quantity:
    Add MH2-YZ Mounting Kit $3.25ea


    Product Notes: Click On Picture To Enlarge
  • RB6: 1 1/2" long L-bracket. Yellow zinc.
  • RB2: 2" long L-bracket. Yellow zinc.
  • RB9: 5" long double angle bracket. Yellow zinc.
  • RB8-L: 7" long left angle bracket. 65 degree bend.
  • RB8-R: 7" long right angle bracket. 65 degree bend.
  • RB7: 3" long flat extension. Yellow zinc.
  • RB11: 6" long flat extension. Yellow zinc.
  • RB10: 12" long single angle bracket. Yellow zinc.
  • Lengths listed are approximate.
    For product questions or ordering assistance call (302)629-8508.
  • Reinforcement Plates

    Quantity:
    Add MH11 Zinc Chromate Mounting Bolt $1.30ea
    Add MH12 Zinc Chromate Lock Washer $.35ea


    Product Notes: Click On Picture To Enlarge
  • RB1-1: Curved steel with attached weldnut. Measures 4 1/2" x 3".>
  • RB1: Same as RB1-1 except pair.
  • RB3: Steel with attached weld nut. Measures 4 1/2"(not including tip) x 1 1/2".
  • RB4: Measures 3" x 1 1/2". Accepts a 7/16th fine thread bolt.
  • Lengths listed are approximate.
    For product questions or ordering assistance call (302)629-8508.


  • Liability Disclaimer: The Andover Companies, and its subsidiaries assumes no responsibility for any damage due to the installation, either proper or improper, or for any damage or bodily injury arising from the use of any product. It is understood that the purchaser, installer and/or end user is responsible for the determination that the product purchased is suitable for its intended use and agrees to indemnify and hold The Andover Companies,Inc and its subsidiaries, harmless for any claim, action or demand arising from the installation and/or use of any product. There are no guarantees or warrantees on any product, implied or expressed, of fitness for a particular use with any such warrantees being specifically and expressly disclaimed. In the event any of the above limitations are held not enforceable our liability shall not exceed an amount equal to the amount paid to us for the product. Receipt of product or products confirm acceptance of disclaimer and liability transfer to purchaser, installer and/or end user.

    All information detailed within this document is based on information believed to be accurate but accuracy is not guaranteed. All pictures, diagrams and item descriptions are protected property of The Andover Companies,Inc and are not to be duplicated in any manner without written permission.

    (3point 9-1-15)