1968-73 Corvette Seat Belts
When installing a seat belt where it was not previously installed or if the factory underbody and/or shoulder harness reinforcement plates are damaged or missing it is suggested that a RB1-1(each) or RB1 (pair) replacement underbody or RB3 replacement shoulder harness reinforcement plate with attached weld nut be used to add support to all of the mounting points.Webbing colors vary from mill run to mill run therefore a match to upholstery or carpet is not be guaranteed. If a webbing match to an existing interior color is required it is suggested that a webbing sample be ordered.
....................................................................................................
Replacement Non-Retractable Lap Seat Belts that measure approximately 60" long end to end with fixed anchor end fittings that bolt directly to the floor.Available with a standard pushbutton buckle with red push background with white "PRESS",an upgrade pushbutton buckle with a black push background with white "PRESS" (specify or select buckle upgrade 108 when ordering) and a deluxe all metal pushbutton buckle.
*Prior to the order number indicates that all of the plastic pieces are color matched to the webbing color.Unless indicated all of the plastic pieces are black regardless of the webbing color.To view webbing colors click on the color name to be directed to the webbing color page.
Year Color With Standard Buckle With Deluxe Buckle
1968-73 Black-B *W8202B *W8207B-60
1968-70 Bright Blue Available Soon Available Soon
1968-73 Dark Blue-C *W8202C *W8207C-60
1968-73 Light/Medium Saddle-L *W8202L *W8207L-60
1968-73 Dark Saddle Available Soon Available Soon
1969-71 Green-G W8202G W8207G-60
1968-69 Gray/Gunmetal-K *W8202K *W8207K-60
1968 Brown/Tabacco Available Soon Avaialble Soon
1973 Oxblood-T *W8202T *W8207T-60
1968-72 Red-N *W8202N *W8207N-60
....................................................................................................
1968 Replacement Car Sets:Available Soon
....................................................................................................

1969 replacement non-retractable lap belt car set that includes the lap seat belts for the driver and passenger seat that are similar in design to the originals where the optional independent retractable shoulder harness attached to the latch end side of the lap seat belt. These replacement car sets have the original mounting configuration and utilize the original mounting locations. The non-adjustable buckle end side is 12" long and is covered with a hard plastic sleeve.
The optional retractable add-on shoulder harness is also available.This shoulder harness is not compatible with an original Corvette seat belt.Two required per car..
*Prior to the order number indicates that all of the plastic pieces are color matched to the webbing color except for the buckle which is black.Unless indicated all of the plastic pieces are black regardless of the webbing color.To view webbing colors click on the color name to be directed to the webbing color page.

1970-71 replacement non-retractable lap seat belt car set that includes the lap seat belts for the driver and passenger seat that are similar in design to the originals where the optional independent retractable shoulder harness attached to a stud on the retractable latch end metal tongue. These replacement car sets have the original mounting configuration and utilize the original mounting locations. The non-adjustable buckle end side is 9" long and is covered with a hard plastic sleeve.
The optional retractable add-on shoulder harness that is available is not compatible with an original Corvette seat belt.Refer to the 1970-73 original style section for a compatible shoulder harness..

1972-73 replacement retractable lap belt car set that include the lap seat belts for the driver and passenger seat that are similar in design to the originals where the optional retractable shoulder harness attached to a stud on the latch end side of the lap belt. The retractor is not equipped with the dash seat belt warning electrical connector that was used on some 1972-73 models. These replacement car sets have the original mounting configuration and use the original mounting locations. The non-adjustable buckle end side is 9" long and is covered with a hard plastic sleeve. If using the original under the seat fiberglass well cover it may be necessary to remove the retractor plastic cover for clearance.
The optional retractable add-on shoulder harness that is available is not compatible with an original Corvette seat belt.Refer to the 1970-73 original style section for a compatable shoulder harness..
*Prior to the order number indicates that all of the plastic pieces are color matched to the webbing color except for the buckle which is black.Unless indicated all of the plastic pieces are black regardless of the webbing color.To view webbing colors click on the color name to be directed to the webbing color page.
Year Color Lap Belt Car Set Shoulder Harness
1968 Black Available Soon Available Soon
1968 Blue,Bright Available Soon Available Soon
1968 Blue,Dark Available Soon Available Soon
1968 Gray/Gunmetal Available Soon Available Soon
1968 Red Available Soon Avaialble Soon
1968 Saddle Available Soon Avaialble Soon
1968 Tobacco/Brown Available Soon Available Soon
1969 Black-B *W8217B W8219B
1969 Blue,Bright Available Soon Available Soon
1969 Gray/Gunmetal-K *W8217K W8219K
1969 Green-G W8217G Avaialble Soon
1969 Red-N *W8217N W8219N
1969 Saddle Available Soon Avaialble Soon
1970 Blue,Bright Available Soon Available Soon
1970-71 Black-B *W8218B W8219B
1970-71 Blue,Dark-C *W8218C W8219C
1970-71 Green-G W8218G Avaialble Soon
1970-71 Red-N *W8218N W8219N
1970-71 Saddle,Dark Avaialble Soon Available Soon
1970-71 Saddle,Light-L *W8218L W8219L
1972-73 Black-B *W8216B W8219B
1972-73 Blue,Dark-C *W8216C W8219C
1972-73 Red-N *W8216N W8219N
1972-73 Saddle,Dark Avaialble Soon Avaialble Soon
1972-73 Saddle,Medium-L *W8216L W8219L
1973 Oxblood-P *W8216P W8219P
1970-73 Original Style Car Sets,Partial Sets And Components
Car sets including the seat belts for the driver and passengers side plus buckle end with cover.
Car sets are available with or without the optional add-on shoulder harness assemblies.
The chart boot(W8170 Series)which installs after the harness end goes through the seat back is not included.
Colored buckle end covers and chart boot are dyed to match the webbing color.
Boots and webbing colors are not guaranteed to match an original factory color.
Original mounting bolts will not fit the retractor base plate mounting hole.
Lap retractors do not include the electrical connector for the dash warning light.
The shoulder harnesses listed will attach to an original Corvette lap seat belt stud to complete a factory set.
Car Sets
w/Out Harness w/Harness Latch Ends Should Harness Chart Boot
Year Color Item Number Item Number Item Number Item Number Item Number
1970-71 Black N/A N/A N/A W8128 W8170-01
1970-71 Red N/A N/A N/A W8128-10 W8170-10
1970-71 Dark Saddle N/A N/A N/A W8128-15 W8170-15
1970-71 Medium Saddle N/A N/A N/A W8128-13 W8170-13
1972-73 Black W8150 W8151 W8002 W8128 W8170-01
1972 Red W8150-10 W8151-10 W8002-10 W8128-10 W8170-10
1972-73 Dark Saddle W8150-15 W8151-15 W8002-15 W8128-15 W8170-15
1973 Dark Blue W8150-33 W8151-33 W8002-33 W8128-33 W8170-33
1972-73 Medium Saddle W8150-13 W8151-13 W8002-13 W8128-13 W8170-13
1973 Oxblood W8150-21 W8151-21 W8002-21 W8128-21 W8170-21
....................................................................................................
1968-73 Retrofit Car Sets Specifications-Coming Soon.Call For Information.
Retractable combination lap seat belts with shoulder harness including the driver and passenger side seat belts,mounting hardware and installation instructions.
....................................................................................................
 
Mounting Hardware And Related
One MH2B is required per lap belt if not using RRB-1 or RB1 reinforcing plates or using factory reinforcing plates.
When using RB1-1,RB1 or RB3 reinforcing plates mounting kits are not required. One MH1-1 bolt is used per plate.
If using existing factory underbody reinforcing plates order the approriate mounting kit number 8188 to 8239.
A car set mounting kits does the driver and passenger side seat belts.
Year Item Number Description
1972-73 CR2 Retractor.Lap Belt Replacement.Webbing And Latch Not Included.
1970-73 CR2 Retractor.Shoulder Harness Replacement.Webbing And Latch Not Included.
1968-73 MH2B Replacement Lap Seat Belt Mounting Kit.Per Belt.
1968 8225 Lap Belt Car Set Mounting Kit With Original Style Allen Head Bolts.
1968 8196 Lap Belt Car Set With Shoulder Mounting Kit With Original Style Allen Head Bolts.
1968 8214 Bolt Lap Or Shoulder Harness Mounting.Original Style Allen Head.
1969 8200 Lap Belt Car Set Mounting Kit.
1969 8193 Lap Belt With Shoulder Harness Car Set Mounting Kit.
1970-71 8188 Lap Belt With Shoulder Harness Car Set Mounting Kit.
1970-71 8224 Lap Belt Car Set Mounting Kit.
1969-73 8189 Shoulder Harness Mounting Bolt.Per Harness
1972-73 8239 Lap Belt Car Set Mounting Kit.
1972-73 8223 Lap Belt With Shoulder Harness Car Set Mounting Kit.
1970-73 LE1 Shoulder Harness To Latch End Chrome Connector
1972-73 LE2 Latch End Chrome Connector With Shoulder Harness Stud.
1968-73 RB1-1 Replacement Underbody Reinforcement Plate.Each
1968-73 RB1 Replacement Underbody Reinforcement Plate.Pair
1968-73 MH1-1 Bolt.For Use With RB1-1,RB1 Or RB3 Reinforcing Plates.
1968-73 RB3 Replacment Shoulder Harness Reinforcement Plate.

| 1968-73 Replacement Seat Belts |
Price |
Color |
Order |
|
|
| 1972-73 Original Style Seat Belts |
Price |
Color |
Order |
|
|
| Mounting Hardware And Related |
Price |
Order |
|
|
Liability Disclaimer:The Andover Companies, and its subsidiaries assumes no responsibility for any damage due to the installation, either proper or improper, or for any damage or bodily injury arising from the use of any product. It is understood that the purchaser, installer and/or end user is responsible for the determination that the product purchased is suitable for its intended use and agrees to indemnify and hold The Andover Companies,Inc and its subsidiaries, harmless for any claim, action or demand arising from the installation and/or use of any product. There are no guarantees or warrantees on any product, implied or expressed, of fitness for a particular use with any such warrantees being specifically and expressly disclaimed. In the event any of the above limitations are held not enforceable our liability shall not exceed an amount equal to the amount paid to us for the product. Receipt of product or products confirm acceptance of disclaimer and liability transfer to purchaser, installer and/or end user.
All information detailed within this document is based on information believed to be accurate but accuracy is not guaranteed.All pictures,diagrams and item descriptions are protected property of The Andover Companies,Inc and are not to be duplicated in any manner without written permission.
(1968-73_Corvette_Seat_Belts 1-11-10)
|