On Sale 1970-02 Camaro Return To Main Index Page
Individual Components,Hardware And Webbing Build Your Own Contact Us:EMail Call Us:(302) 629-8508

Seat belts for 1967, 1968 and 1969 Camaro RS, SS and Z28 models including non retractable lap seat belts, non retractable original factory type independent shoulder harness sets, original factory type retractable lap seat belt sets with correct retractor boots plus combination lap seat belts with attached shoulder harness sets.

Also available is a Conversion Kit for use in a coupe only when originality is not required to be used to add a combination retractable lap seat belt with attached shoulder harness where not previously installed, to upgrade from a retractable or non retractable lap seat belt only or to replace a damaged or missing factory retractable lap seat belt with independent shoulder harness. Includes seat belts, installation instructions and required mounting hardware for both driver and passenger.

All seat belts and hardware are new with all seat belts manufactured or assembled in the USA with USA certification tag confirming compliance with current FMVSS(Federal Motor Vehicle Safety Standards) 209 and 302.




Conversion Kit

Quantity

Product Notes: Click On Picture To Enlarge
  • For Installation In A Coupe Only.
  • Sold As Set including the seat belts and conversion hardware for driver and passenger plus installtion instructions.
  • Additional Webbing Colors Are Available. Contact us to order.
  • Buckle is all metal measuring 1 3/4" x 1 3/4" manufactured under GM reproduction license.
  • The retractor cover, buckle sleeves and all plastic pieces are black.
    For product questions or ordering assistance call (302)629-8508.


  • Front Or Rear Non Retractable Lap Seat Belts



    Quantity

    Add MH4 Standard Mounting Kit. $5.25ea
    Add 201K Retrofit Mounting Kit. $12.00ea

    Product Notes: Click On Picture To Enlarge
  • For use as front lap seat belt when retractability is not wanted.
  • For use as rear lap seat belt when a conversion kit is being installed in the front.
  • Buckle is all metal measuring 1 3/4" x 1 3/4" manufactured under GM reproduction license.
  • Additional Webbing Colors Are Available. Contact us to order.
  • See related section at end of page for Roll-A-Belt clip on webbing retractor.
  • Lengths: Adjustable latch side 36". Fixed buckle side 24".
  • For product questions or ordering assistance call (302)629-8508.



  • Quantity

    Click Here To View Available Webbing Colors Or To Order Webbing Samples


    Add MH4 Standard Mounting Kit. $5.25ea
    Add 201K Retrofit Mounting Kit. $12.00ea

    Product Notes: Click On Picture To Enlarge
  • **After webbing color indicates buckle top is color matched to the webbing color.
  • Unless **indicated the buckle top is black.
  • Can be ordered with any 7 panel webbing color on sample page.
  • Webbing is current production most commonly used 7 panel polypropylene blend.
  • Buckle measures 2 1/2"W X 2 5/8" L with 3/4 x 3/4 GM logo on blue background on press area manufactured under GM reproduction license.
  • Lengths: Adjustable side 36". Buckle side 24".
  • Floor anchor end fittings are chrome flat with a 1/2" mounting bolt hole.
  • Measurements are approximate.
  • See related section at end of page for Roll-A-Belt clip on webbing retractor.
  • Standard mounting kit(MH4) includes bolts, washers, nuts and reinforcing washers.
  • A retrofit kit which includes underbody reinforcing plates to add support to the mounting points should be used when seat belts were not previously installed.
  • Standard mounting kit(MH4) is not required when ordering a retrofit kit.
    For product questions or ordering assistance call (302)629-8508.
  • Original Configurations With 3 Panel Webbing



    Front Or Rear Non Retractable Lap Belt

    Quantity

    Click Here To View Webbing Colors Or To Order Webbing Samples

    Add MH4 Standard Mounting Kit $5.25ea
    Add 201K Retrofit Mounting Kit $12.00ea

    Product Notes: Click On Picture To Enlarge
  • **After webbing color indicates buckle top is color matched to the webbing color.
  • Unless **indicated the buckle top is black.
  • Can be ordered with any webbing color on sample page.
  • Buckle measures 2 1/2"W X 2 5/8" L with 3/4 x 3/4 GM logo on blue background on press area manufactured under GM reproduction license.
  • Lengths: Adjustable side 36". Buckle side 24".
  • Floor anchor end fittings are chrome flat with a 1/2" mounting bolt hole.
  • Measurements are approximate.
  • See related section at end of page for Roll-A-Belt clip on webbing retractor.
  • Standard mounting kit(MH4) includes bolts, washers, nuts and reinforcing washers.
  • A retrofit kit which includes underbody reinforcing plates to add support to the mounting points should be used when seat belts were not previously installed.
  • Standard mounting kit(MH4) is not required when ordering a retrofit kit.
    For product questions or ordering assistance call (302)629-8508.



  • Front Retractable Lap Seat Belt Set

    Quantity

    Click Here To View Webbing Colors Or To Order Webbing Samples

    Product Notes: Click On Picture To Enlarge
  • Sold As Set Only. Includes retractable lap seat belts for the driver and passenger.
  • **After webbing color indicates buckle top and retractor boots are color matched to the webbing color.
  • Unless **indicated the buckle top and retractor boots are black.
  • Buckle measures 2 1/2"W X 2 5/8" L with 3/4 x 3/4 GM logo on blue background on press area manufactured under GM reproduction license.
  • Can be ordered with any webbing color on sample page.
    For product questions or ordering assistance call (302)629-8508.



  • Front Non Retractable Shoulder Harness Set

    Quantity

    Click Here To View Webbing Colors Or To Order Webbing Samples

    Product Notes: Click On Picture To Enlarge
  • For Installtion In A Coupe only.
  • Sold as set. Attaches to the factory coupe/hardtop roof/pillar bolting location.
  • Includes adjustable buckle side and shoulder harness strap for driver and passenger.
  • **After webbing color indicates buckle top and plastic pieces are color matched to the webbing color.
  • Unless **indicated the buckle top and plastic pieces are black.
  • Buckle measures 2 1/2"W X 2 5/8" L with 3/4 x 3/4 GM logo on blue background on press area manufactured under GM reproduction license.
  • Can be ordered with any webbing color on sample page.
    For product questions or ordering assistance call (302)629-8508.


  • Related

    Button Latch Stop

    Quantity:

    Product Notes: Click on picture to enlarge
  • Keeps shoulder harness latch from sliding down webbing when seat belt is not in use.
  • The seat belts do not need to be removed in order to install.
  • To install, press pin button through webbing at desired location then press lock portion to secure.
  • Does not alter retractor safety features.
    For product questions or ordering assistance call (302)629-8508


  • Reinforcement Plates

    Quantity:

    Add MH11 Zinc Chromate Mounting Bolt Per Plate $1.30ea
    Add MH12 Zinc Chromate Lock Washer Per Plate $.35ea

    Product Notes: Click On Picture To Enlarge
  • RB1-1:Curved steel with attached weldnut. Measures 4 1/2" x 3".
  • RB1: Same as RB1 except pair.
  • RB3:Steel with attached weldnut. Measures 4 1/2"(not including tip) x 1 1/2".
  • RB4:Measures 3" x 1 1/2". Accepts a 7/16th fine thread bolt.
  • Measurements listed are approximate.
    For product questions or ordering assistance call (302)629-8508.


  • Retractor: Webbing Clip On

    Quantity:

    Product Notes:
  • 80296: Clip-on. Chrome 1950-60's style "Roll-A-Belt".
  • Installation instructions included.
    For product questions or ordering assistance call (302)629-8508

  • Liability Disclaimer: The Andover Companies, and its subsidiaries assumes no responsibility for any damage due to the installation, either proper or improper, or for any damage or bodily injury arising from the use of any product. It is understood that the purchaser, installer and/or end user is responsible for the determination that the product purchased is suitable for its intended use and agrees to indemnify and hold The Andover Companies,Inc and its subsidiaries, harmless for any claim, action or demand arising from the installation and/or use of any product. There are no guarantees or warrantees on any product, implied or expressed, of fitness for a particular use with any such warrantees being specifically and expressly disclaimed. In the event any of the above limitations are held not enforceable our liability shall not exceed an amount equal to the amount paid to us for the product. Receipt of product or products confirm acceptance of disclaimer and liability transfer to purchaser, installer and/or end user.

    All information detailed within this document is based on information believed to be accurate but accuracy is not guaranteed. All pictures, diagrams and item descriptions are protected property of The Andover Companies,Inc and are not to be duplicated in any manner without written permission.

    (1967-69_Camaro_Seat_Belts 4-4-17)