On Sale Seat Belt Main Index Page Contact Us:EMail Call Us:(302) 629-8508
Retractable Seat Belt Choices Hardware And Components Build Your Own

Non retractable lap seat belts for 1964, 1965, 1966 and 1967 Chevrolet Chevelle coupes and convertibles and 1964, 1965, 1966 and 1967 El Camino with original appearance aviator lift release buckle with a chrome lid and spring hinged metal to metal contact closing devise, matched chrome tongue with a rectangular cut out, 4 row/panel original style webbing and chrome fixed anchor end fittings that bolt directly to the floor. Most front seat installations will use a 74" long seat belt and a rear seat installation will use a 60" long seat belt.

All of the seat belts and related hardware are new and manufactured to meet or exceed FMVSS (U.S. Federal Motor Vehicle Safety Standards) 209 and 302 with all of the seat belts manufactured or assembled in the USA.

When installing a seat belt where it was not previously installed it is suggested that a 203K retrofit mounting kit be used which include RB1 underbody reinforcement plates with attached weldnut to add support to the mounting points. A MH4 or MH2-YZ mounting kit or RB1 underbody reinforcing plates are not required when ordering a 203K retrofit mounting kit. To add retractability to one side of a non retractable lap seat belt an original style metal clip-on webbing "Roll-A Belt" (80296) retractor and a replacement (CR1) black plastic retractor are available.

Click on picture to enlarge Also listed is a lower cost vintage buckle non retractable lap seat belt (W8237 and W8211 Series) that utilize a vintage chrome lift lid buckle with 7 row/panel current production webbing and yellow zinc fixed end fittings that bolt directly to the floor for those installations that do not require an original style aviator buckle non retractable lap seat belt. Additional seat belt buckle options have been listed at the end of the section that includea a vintage lift with a dull satin lid a color coated plus color coated with a bowtie emblem lid. Push button buckle designs include a red or black press area background with white press and with a starburst or GM logo.

To Order:
  • Call:(302)629-8508 8-5 EST Monday-Friday
  • Or use the secure on-line order form below.
  • Webbing colors are not guaranteed to match an existing seat belt, interior or interior component.
  • Click Here to view webbing colors or to order webbing samples.
  • These seat belts are available with any webbing color shown on sample page.Contact us to order.
    Description                                                                  Item Number
    Aviator Buckle 74" Non Retractable Lap Seat Belt                             W8755 Series
    Aviator Buckle 60" Non Retractable Lap Seat Belt                             W8756 Series
    Vintage Buckle 74" Non Retractable Lap Seat Belt                             W8211 Series
    Vintage Buckle 60" Non Retractable Lap Seat Belt                             W8237 Series
    
    Aviator Lap Belt Mounting Kit. Zinc Chromate Hardware. One Per Lap Seat Belt MH4 Cover. Anchor End Fitting And Bolt Head. Black. Paint To match. CVR100 Vintage Lap Belt Mounting Kit. Yellow Zinc Hardware. One Per Lap Seat Belt MH2-YZ Retrofit Mounting Kit. One Per Lap Seat Belt 203K Underbody Reinforcement Plates With Welnut(2). One Set Per Lap Seat Belt RB1 Webbing Retractor, Clip-On. Replacement. Black Plastic CR1 Webbing Retractor, Clip-On Chrome Original Style "Roll-A Belt" 80296
    Color                      With Aviator Buckle          With Vintage Buckle    
                            74" Long      60" Long          74" Long    60" Long  
    Aqua,Turquoise          W8755-47      W8756-47          W8211E      W8237E  
    Black                   W8755-01      W8756-01          W8211B      W8237B  
    Blue,Dark               W8755-02      W8756-02          W8211C      W8237C 
    Blue, With Silver Tint  W8755-45      W8756-45          N/A         N/A 
    Blue,Medium             N/A           N/A               W8211D      W8237D 
    Brown,Dark              N/A           N/A               W8211M      W8237M
    Brown,Medium(Copper)    N/A           N/A               W8211H      W8237H
    Gold, Medium/Tan        W8755-60      W8756-60          N/A         N/A
    Gray,Medium             N/A           N/A               W8211K      W8237K 
    Green,Dark              N/A           N/A               W8211G      W8237G  
    Red,Bright              W8755-22      W8756-22          W8211N      W8237N   
    Red,Dark                W8755-58      W8756-58          W8211F      W8237F 
    Saddle,Tan              N/A           N/A               W8211L      W8237L  
    Silver                  W8755-27      W8756-27          W8211J      W8237J 
    Tan                     N/A           N/A               W8211V      W8237V 
    White                   N/A           N/A               W8211S      W8237S
    
    1964-67 Non Retractable Lap Belts Price
    W8755 Series: Aviator Buckle 74" Long Lap Seat Belt $52.50ea
    W8756 Series: Aviator Buckle 60" Long Lap Seat Belt $50.00ea
    W8211 Series: Vintage Buckle 74" Long Lap Seat Belt $27.00ea
    W8237 Series: Vintage Buckle 60" Long Lap Seat Belt $25.00ea


    Mounting Hardware And Related Price
    MH2-YZ: Mounting Kit With Yellow Zinc Hardware. One Per Seat Belt. $3.25ea
    MH4: Mounting Kit With Zinc Chromate Hardware. Per Seat Belt. $5.00ea
    203K: Retrofit Mounting Kit With Reinforcing Plates And Hardware. Per Seat Belt. $18.00ea
    CVR100: Anchor End And Bolt Head Cover.Two Required Per Seat Belt. Black. Paint To Match Interior. $10.00ea
    CR1: Retractor, Replacement. Black Plastic. $9.50ea
    80296: Retractor Clip-On Original Style "Roll-A-Belt". $20.00ea
    RB1: Underbody Reinforcement Plate With Attached Weld Nut. Set Of 2. Uses 2 Each MH11 Bolt And MH12 Lock Washer $25.00st
    MH11: Bolt, Zinc Chromate. For Use With Underbody Reinforcing Plate. RB1-1 Uses 1. RB1 Uses 2. $1.30ea
    MH12: Lock Washer, Zinc Chromate. For Use With Underbody Reinforcing Plate. RB1-1 Uses 1. RB1 Uses 2. $.35ea

    Additional Seat Belt Buckle Styles

    Click on the buckle picture to view additional non retractable lap seat belts, non retractable lap seat belts with shoulder harness, retractable lap seat belts and retractable lap seat belts with shoulder harness options.

    Vintage Deluxe Lift Latch With Black Hammertone Lid: Buckle has metal to metal contact a bright chrome base with a bright chrome matched tongue.

    Vintage Deluxe Lift Latch With Chevrolet Bowtie: Buckle has recessed insert and matched to the webbing color lid with metal to metal contact, bright chrome base and bright chrome matched tongue.

    Vintage Satin Lift Lid: Buckle has metal to metal contact with a dull satin lid, bright chrome underside and bright chrome matched tongue.

    Push Button: Buckle has a metal underside with a color matched to the webbing plastic cover with a red back ground with white "Press" on press area.

    Push Button: Buckle has a metal underside with a color matched to the webbing plastic cover with a black back ground with white "Press" on press area.

    Starburst Push Button: Buckle is all metal with adjustable or non adjustable matched tongue.

    GM Logo Push Button:Buckle has metal underside and color matched to the webbing plastic cover with non adjustable matched chrome tongue.

    GM Logo Push Button: Buckle is all metal with adjustable or non adjustable matched tongue.

    On Sale Contact Us:EMail Call Us:(302) 629-8508
    Return To Seat Belt Main Index Page Hardware And Components Made To Order


    Liability Disclaimer: The Andover Companies, Inc., and its subsidiaries assume no responsibility for any damage due to the installation, either proper or improper, or for any damage or bodily injury arising from the use of any product(s). The purchaser, installer and/or end user is responsible for the determination that any product(s) purchased is suitable for, or the fitness of, any product(s) purchased for its intended use and agrees to indemnify and hold The Andover Companies, Inc and its subsidiaries, harmless from any claim, action or demand arising from the installation and/or use of any product(s). In the event any of the above limitations are held not enforceable our liability shall not exceed an amount equal to the amount paid to us for the product(s). Receipt of product(s) confirms the acceptance of this disclaimer and the confirmation of the understanding of the full and complete liability transfer to purchaser, installer and/or end user.

    All information detailed within this document is based on information believed to be accurate but accuracy is not guaranteed.All pictures,diagrams and item descriptions are protected property of The Andover Companies,Inc and are not to be duplicated in any manner without written permission.

    (1964-67_Chevelle_Seat_Belts 6-28-15)