Main Index On Sale Contact Us:EMail Call Us:(302)629-8508
1968-69 Corvette 1970-71 Corvette 1972-73 Corvette 1974-77 Corvette 1978-82 Corvette 1984-96 Corvette

Corvette seat belts for 1953, 1954, 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966 and 1967 coupes and convertibles. Seat belt configurations include original style non retractable lap seat belts, replacement non retractable lap seat belts, retractable lap seat belts plus retrofit combination retractable lap seat belt with shoulder harness kits which include the required retrofit mounting hardware. Webbing options include original appearance 3 panel and 7 panel which is a lower cost alternative in colors to match most original interiors.

All of the seat belts and related hardware listed are new and manufactured to meet or exceed FMVSS (U.S. Federal Motor Vehicle Safety Standards) 209 and 302 with all seat belts manufactured or assembled in the USA..

Non Retractable Lap Seat Belts

(W8237 Series) Click on picture to enlarge
  • Vintage With Chrome Lid with metal to metal contact with bright chrome base,lid and matched tongue. The anchor end fittings are angeled yellow zinc. Order one MH2 basic mounting kit or one 203K retrofit mountng kit per seat belt. To add retractability order one 80296 original style "roll-a-belt clip on webbing retractor per seat belt. Buckle will not fit original console buckle holder.

    (W8007-60 Series) Click on picture to enlarge
  • Vintage With Satin Lid with metal to metal contact with bright chrome base and satin lid with chrome matched tongue. The anchor end fittings are flat bright chrome. Order one MH4 basic mounting kit or one 203K retrofit mountng kit per seat belt. To add retractability order one 80296 original style "roll-a-belt clip on webbing retractor per seat belt.

    (W8008-60 Series) Click on picture to enlarge
  • Vintage With Color Matched Lid With Chevrolet Bowtie with metal to metal contact, bright chrome base and chrome matched tongue. The anchor ends fittings are flat bright chrome. Order one MH4 basic mounting kit or one 203K retrofit mountng kit per seat belt. To add retractability order one 80296 original style "roll-a-belt clip on webbing retractor per seat belt. Buckle will not fit original console buckle holder.

    (W8325-60 Series) Click on picture to enlarge
  • GM Logo Push Button with chrome matched tongue with color matched tongue cover. Order one MH2 basic mounting kit or one 203K retrofit mountng kit per seat belt. To add retractability order one 80296 original style "roll-a-belt clip on webbing retractor per seat belt.

    To Order:
  • Call: (302) 629-8508 8-5 EST Monday-Friday
  • Or use the secure on-line order form below
  • Click Here to view 7 panel webbing colors or to order webbing samples.
  • Webbing, components or coated buckle lids are not guaranteed to match an interior or existing seat belt.
                    Vintage Lift       Bowtie Lift   Push Button 
    Color         Chrome    Satin                  
    Black        W8237B   W8007B-60    W8008B-60    W8325B-60  
    Blue,Dark    W8237C   W8007C-60    W8008C-60    W8235C-60     
    Blue,Medium  W8237D   W8007D-60    N/A          W8235D-60     
    Charcoal     W8237U   W8007U-60    N/A          W8235U-60     
    Green        W8237G   W8007G-60    W8008G-60    W8325G-60  
    Maroon       W8237P   W8007P-60    W8008P-60    W8325P-60                                                   
    Red,Flame    W8237N   W8007N-60    N/A          W8325N-60     
    Red,Dark     W8237F   W8007F-60    W8008F-60    W8325F-60  
    Saddle       W8237L   W8007L-60    W8008L-60    W8325L-60  
    Silver       W8237J   W8007J-60    W8008J-60    W8325J-60
    Turquoise    W8237E   W8007E-60    N/A          W8325E-60
    White        W8237S   W8007S-60    N/A          W8325S-60
    


    Non Retractable Lap Seat Belts

    Price

    W8237 Series: Vintage Lift With Chrome Lid. $25.00ea
    W8007-60 Series: Vintage Lift With Satin Lid. $30.00ea
    W8008-60 Series: Color Matched Vintage Lift with Bowtie. $40.00ea
    W8325-60 Series: GM Logo Push Button. $30.00ea
    MH2: Basic Mounting Kit. Yellow Zinc. Universal Fit. Includes Underbody Oversize Reinforceing Washers. One Per Belt. Click on picture to enlarge. $3.75ea
    MH4: Basic Mounting Kit. Zinc Chromate. Universal Fit. Includes Oversize Underbody Reinforcing Washers. One Per Belt. Click on picture to enlarge. $5.25ea
    203K: Retrofit Mounting Kit. Includes Underbody Reinforcement Plates With Weld Nuts Plus Mounting Hardware. For use when factory plates are damaged or missing to add support to mounting points. Basic mounting kit is not required when ordering retrofit kit. Click on picture to enlarge. $18.00ea
    80296: Clip-On Webbing Retractor. Original Style Chrome "Roll-A Belt". Click on picture to enlarge. $20.00ea


    Retractable Lap Belt Car Sets

    (W8458 Series) Click on picture to enlarge
  • 1965-1966(Early) Retractable Lap Seat Belt Car Set: Includes Bowtie vintage lift latch buckles with black lid and chrome matched tongue, black boots covering Roll-A-Belt clip-on webbing retractors and black 3 panel webbing for both driver and passenger. Buckle will not fit original console buckle holder bracket.

    (W8459 Series) Click on picture to enlarge
  • 1965-1966(Early) Retractable Lap Seat Belt Car Set: Includes color matched Irving Air Chute original configuration Bowtie vintage lift latch buckles with rectangular center cut out chrome tongue, 3 panel original appearance webbing and color matched boots covering chrome Roll-A-Belt clip-on webbing retractors for both driver an passenger. Buckle fits the original console buckle holder bracket. Click Here to view 3 panel webbing colors or to order webbing samples.

    (W8049 Series) Click on picture to enlarge
  • 1966(Late)-1967 Retractable Lap Seat Belt Car Set: Includes color matched GM Mark Of Excellence push button buckles, retractors with floor mounting brackets, color matched retractor boots and 3 panel original appearance webbing for both the driver and passenger. Click Here to view 3 panel webbing colors or to order webbing samples.

    Retrofit Retractable Lap With Shoulder Harness Car Sets

    (W8025 Series) Click on picture to enlarge
  • 1963-67 Retrofit Kit With Shoulder Harness With Vintage Chrome Lift Latch Buckle: Includes combination retractable lap seat belt with shoulder harness for driver and passenger. Buckle end measures 12" long and is covered with hard plastic sleeve. Installation instructions and retrofit mounting hardware are included. Webbing is 7 panel.

    (W8462 Series) Click on picture to enlarge
  • 1963-67 Retrofit Kit With Shoulder Harness With GM Logo Metal Push Button Buckle: Include combination retractable lap seat belt with shoulder harness for driver and passenger. Buckle end measures 12" long and is covered with a hard plastic sleeve. Installation instructions and retrofit mounting hardware is included. Webbing is 7 panel.

    To Order:
  • Call: (302) 629-8508 8-5 EST Monday-Friday
  • Or use the secure on-line order form below
  • Retractable Seat Belts Car Sets

    Price

    W8458 Series: 1965-66(Early) Retractable Lap Belt Car Set. $205.00ea
    W8459 Series: 1965-66(Early) Retractable Lap Seat Belt Car Set. OE Buckles, 3 Panel Webbing. Color Matched Components. $315.00ea
    W8049 Series: 1966L-67 Retractable Lap Belt Car Set. 3 Panel Webbing. Color matched Components. $235.00ea
    W8025 Series: Retrofit Kit With Vintage Lift Buckle. Includes Mounting Hardware And Instructions. $160.00ea
    W8462 Series: Retrofit Kit With GM Logo Push Button Buckle. Includes Mounting Hardware And Instructions. $180.00ea


    Liability Disclaimer: The Andover Companies, Inc., and its subsidiaries assume no responsibility for any damage due to the installation, either proper or improper, or for any damage or bodily injury arising from the use of any product(s). The purchaser, installer and/or end user is responsible for the determination that any product(s) purchased is suitable for, or the fitness of, any product(s) purchased for its intended use and agrees to indemnify and hold The Andover Companies, Inc and its subsidiaries, harmless from any claim, action or demand arising from the installation and/or use of any product(s). In the event any of the above limitations are held not enforceable our liability shall not exceed an amount equal to the amount paid to us for the product(s). Receipt of product(s) confirms the acceptance of this disclaimer and the confirmation of the understanding of the full and complete liability transfer to purchaser, installer and/or end user.

    All information detailed within this document is based on information believed to be accurate but accuracy is not guaranteed.All pictures,diagrams and item descriptions are protected property of The Andover Companies,Inc and are not to be duplicated in any manner without written permission.

    Return To Seat Belt Main Index Page


    (1953-67_Corvette_Seat_Belts 6-1-18)